Arrma Infraction Plasti Dip + LEDs

Excuse all of my " uhhhs" in the video...I was ready to crash...😴😴😆😂🤣
𝗣𝘂𝗿𝗰𝗵𝗮𝘀𝗲 𝗟𝗶𝗻𝗸𝘀 𝗕𝗲𝗹𝗼𝘄 👇🏾
"Yeah Racing Heat Sink with Twin Tornado High Speed Fans"
www.amazon.com...
"LED Head Lights"
www.amazon.com...
"Boost Converter USB Power Module Supply Module 2V-24V to 5V-28V 2A MT3608 Mico USB (Pack of 10)" www.amazon.com...
"HIKENRI Battery Powered LED Strip Lights, 24-Keys Remote Controlled, DIY Indoor and Outdoor Decoration, 6.56ft Waterproof"
www.amazon.com...
#ArrmaInfraction #6s #DaVerseOfficial #CapPack #TireSmoke #HorizonHobby #SpeedRun #Led #Underglow #Lipo #Spektrum #DX5Rugged #CustomRC #ArrmaNation #Drift
#arrma #infraction #plastidip #leds
**** 𝗗𝗜𝗦𝗖𝗟𝗔𝗜𝗠𝗘𝗥 ****
I don't own the rights to any of this music. Non-profit use!

[@MJWCBW]

That lighting system is genius 🔥🔥🔥

[@FatherandSon_RC]

Great job, and thanks for sharing! I think my Son and I are going to have to give this washer contact thing a try! When he rips with his buddies and they don't hook up the body lights properly, that connector always finds its way into the driveshaft or a wheel!

[@DaVerseOfficial]

@FatherandSon_RC i appreciate it and no problem, im just happy to help others...and yeah, i got tired of that happening to me when i was ripping. Lol

[@dewaynebrown5983]

Great job, I love the whole set up. I especially love the light connection. Great job

[@DaVerseOfficial]

I appreciate it...patience....hard work....and HEADACHE pays off...lolol👍🏾💯

[@ianf1297]

That's super sicc bro!! 1 of one for sure! 👍🏾👍🏾

[@islerenner]

This is amazing. I admire your tenacity and creativity. Well done dude.

[@islerenner]

@@DaVerseOfficial Absolutely my friend, you've done a great job. I wish I had friends like you to hang out with and work on stuff like this. Keep up the great work.

[@islerenner]

@@DaVerseOfficial Thanks bro, I appreciate ya! I grew up running RC's as a kid back in the day and am just getting back into it now. Currently running a slash 4x4 w/ Castle Mamba X 1410 - 3800kv. Robinson Racing & RPM gears. Trenchers and a few other RPM aesthetic upgrades but that's about it, probably hits 60mph, seems fast AF. I'll be starting a new build in a few weeks and I'm on the fence between a Limitless, Infraction or stretched Typhon. Leaning towards the Limitless :) Thoughts?...thanks again hey

[@islerenner]

@@DaVerseOfficial Heck yeah. I've chosen the limitless. XLX, 4070 2250, TRC titanium dogbones, 5.0 Panthers 75c. Can you recommend a servo?

[@traxxastrx4crawlerlove61]

Just bought one used ..now I know how to make the body look clean great video man

[@DaVerseOfficial]

Thats awesome man...your going to love it. Its a blast when you smoke the tires drifting.

[@TheSilversurfer609]

The truck is dope! And that last beat is hot!!!!

[@fonqstarr3636]

smart asf. best light solution ever bro

[@DaVerseOfficial]

Thanks man, I appreciate it. Just trying to be different.

[@alainveenman6571]

Super nice mods for the lights super nice man

[@DaVerseOfficial]

@@alainveenman6571 preciate it, i will soon be getting back into the hobby.💯🙏♥️🤝🏾

[@randallbradley465]

Light systems are 🔥🔥🔥

[@DaVerseOfficial]

@@randallbradley465 preciate the love 💯🤝🏾

[@meanf1502]

How did you make that grill that mean looking

[@DaVerseOfficial]

Pretty simple honestly, I used the screen door material from HOME DEPOT and cut a rectangle to my preference and hot glued it in place.

[@nickpotter1512]

Super crafty led install buddy

[@choke666]

HEY MAN, THATS PRETTY SLICK SICK & RESOURCEFUL. I LIKE IT ALOT.

[@earlmoorhead5555]

Very cool idea 💡👍👍🔥🔥🔥

[@CLeeSTeR]

nice job done on this one all around! Clean. 👀

[@alainveenman6571]

Your tires looks like slicks❤😂

[@DaVerseOfficial]

@alainveenman6571 yea, they basically turn into that after 2 runs...but the upgraded ones, zero sliding...their sticky.

[@alainveenman6571]

@DaVerseOfficial I got mine last week also the blue version it is a beast even on 75procent throttle

[@DaVerseOfficial]

@alainveenman6571 thats awesome bro....the handbrake comes in handy.

[@andrewap77]

Fantastic job Brother, the way you connected your lights is a great idea!

[@andrewap77]

DaVerseOfficial No you are not Nerd, don’t refer to yourself in a negative since. Just say you have a passion or electronics, and build on it that way.

[@ivanw7457]

I like this kinda stuff! Salute brotha 🔥🔥🔥

[@DaVerseOfficial]

Preciate the support my guy 💯🤝🏾

[@sprather84]

Awesome vid my RC friend 👍 SUBBED The dip is dope 💯

[@DaVerseOfficial]

Preciate it bro. 💯🤝🏾

[@sprather84]

@@DaVerseOfficial yessir 🤜💥🤛

[@djtomtrain2015]

Brilliant!

[@DaVerseOfficial]

Thanks👍🏾

[@teamvegarc]

Amazing job on your infraction bro .. dope looking body as well 🏎💨💯😎💪🏾

[@pallidbustofpallas4679]

The washers for the connection to the body is brilliant! Have never seen that before, I want to try it!

[@tiborvon]

Thats a sick looking Infraction bro, top stuff

[@tiborvon]

Lol

[@rattlecanonlexan836]

Great video!!!!!!

[@DaVerseOfficial]

Thanks for the support🤝🏾💯

[@jackieparker6451]

I love how you did the washers for a wireless connection! I tried doing the same wireless set up with my felony 6s but I'm having a clearance issue when trying to put the body back on the car. I can't seen to get the pins to secure the body because of the clearance. I even remove the plastic clips that are on the posts. How did you get yours to clear? Thanks for your time! Love all the mods you do. I haven't seen anyone come close to you on this. Clean work!

[@DaVerseOfficial]

Preciate the kind words....honestly, I had that same problem until I improvised a little and the way I did it was that the top hole on the post where the clips go through, I used a soldering iron with a needle tip and made the hole taller from this [ o ] to this [ 0 ] and that 1mm difference made up the 1mm washer add on.

[@jackieparker6451]

Good to know! I will do the same. Thanks for the info and getting back to me! Much appreciated sir. Keep up the good work!!

[@DaVerseOfficial]

@@jackieparker6451 no problem, anytime I can help, just let me know.

[@richardbekkers6789]

cool switch idea thx but no lights in descr refre peace

[@ParcoUpchurch]

@DaVerseOfficial Sir very nice job!! I have an Infraction as well but I wanted to ask WHAT and WHERE did you get the mesh screen for the sides at the back? Two, how did you glue or fix it down please Sir? Thx

[@roryfields268]

Very nice I love it Bruh

[@JoseRivera-us3qz]

I can’t see the information on the LED set up you have , my screen on that side is damaged, can you send me the information or part number for that?

[@DaVerseOfficial]

www.amazon.com/dp/B077TV48MM/ref=cm_sw_r_fm_apa_i_8U7qEbBBXASAS www.amazon.com/dp/B019FD678G/ref=cm_sw_r_other_apa_i_ZdQmEbMMBERXZ

[@burn1gotbeats]

🔥🔥🔥

[@miken7295]

Sick build !!!!!

[@MacSide01]

Man - that's metamucil. I love it. I would use magnets on the body though. I use them on my limitless and XO-1 with no problems. They will also provide electrical connectivity to the body electronic components. Can you please direct me to where you found the screening? Thanks a lot!

[@LuisLPRCs]

Lights look great! Good Job! 😎😎😎😎😎😎😎😎😎

[@JoseRivera-us3qz]

Can you send me the link for that same set up LED, I have the felony

[@DaVerseOfficial]

Links are in the description.

[@BLX187]

nicely done..

[@hkaydcc6219]

Bro sick ass mods

[@FpvRcCar]

_Nice _*_DAVERSE_*_ rigged up nice_ 👍💪👌💯

[@FpvRcCar]

DaVerseOfficial *no problem brotha sharing is caring great i came across you I have some speed cars to 👍💪😎💯👌*

[@FpvRcCar]

DaVerseOfficial *defo bro if you need help with speed I’ll give you some info this is my new channel my other channel is D Smith rc* 👍👌🙌💪👊💯

[@RattusSwedicus]

Cool looking rig you got there fellow KZbinr DVO , very nice done job indeed . Any other plans for your rig . . . ? Got a modded Infraction myself by the way , only "optical modded" so far thou but motor & ESC upgrade is on my wish list . Have to save some money again first thou , did recently spend some money on upgrade parts for my Kraton 8s 1/5 = full M2C chassi kit & Motor mount / Hobbywing Ezrun 800KW & ESC / Stainless Skrew Kit + a bunch of pinion cogs . . . . :O) .

[@GabeLSC]

Sick!!!

[@GabeLSC]

@@DaVerseOfficial #subbed The screen is legit. I may look into borrowing that idea from you. I'll throw you the credit bro!

[@east_ldnrc1378]

Yeah bro its looking neat 👌🏾

[@east_ldnrc1378]

@@DaVerseOfficial whats plasti dip? Similar to hydro dip??

[@rawiswar1969able]

Looks hot how did u do the dip?

[@jeffreylrobison7206]

Bad ass

[@DaVerseOfficial]

💯👍🏾🤝🏾 Thank you

[@teamvegarc]

Did you paint the outside of your stock body ?

[@jeffreylrobison7206]

You win

[@DaVerseOfficial]

👍🏾💯.. thanks for the support.

[@cigolicious]

Badazz! Would you be willing to help out on the build if need be and how would I contact you? I'm in Austin, TX

[@DaVerseOfficial]

Thanks man, and any knowledge I have im willing to share and help out. My IG is DaVerseOfficial

[@cigolicious]

@@DaVerseOfficial Thank you very much. I'm some what new to the RC world. I've seen some exciting things that can be done with these cars. The way you go about installing the lights is rather unique. I'll hit you up when i receive the parts

[@DaVerseOfficial]

@@cigolicious just let me know, and any advice or help I can give, I got you

[@johnrennallc5423]

That looks amazing! Does all that open grill mess with the trucks aero Dynamics at high speeds?

[@johnrennallc5423]

@@DaVerseOfficial I imagine this would also help with the engine and esc heating up.

[@mrmontgomery526]

Nice lighting system sir,where did you find the lights

[@mrmontgomery526]

DaVerseOfficial thank you sir

[@andrewap77]

That’s HOT!

[@DaVerseOfficial]

Preciate it💯🤝🏾

[@gucciskunkit]

Thats a baad boy!

[@The667tony]

Can you one of these for me? If so, what's your charge?

[@DaVerseOfficial]

I don't haven't messed with the RCs in a minute, and I sold this one. I know there's a lot of guys on here in the comments section that customize em.

[@The667tony]

@@DaVerseOfficial I'll check with them. Thanks for replying.

[@DaVerseOfficial]

@@The667tony no problem bro

[@KaniZRC]

Nice lights! I just did my Infraction rear tail lights today. Check it out :)

[@tharusbradley4651]

This is genius work....! You should go into business for yourself and stop giving away your God given secrets...

[@DaVerseOfficial]

I appreciate it...I'm finally taking the necessary 🚶‍♂️'s to make it happen...just has to be in God's will.💯🤝🏾

[@tharusbradley4651]

@@DaVerseOfficial It is always God's will for us to PROSPER. Stop playing and get busy....