Arrma Kraton 6s V5 ESC and Motor Upgrade

[@thebigkingshow2983]

That truck should be pretty much indestructable with all those M2C upgrades!

[@bobbydirtamiyer2151]

Cool bro! Believe it or not, I still have the original esc and motor on my Talion V1 ! ! ! This old stuff still works like it's brand new lol.

[@joeyfiend7864]

Super awesome upgrades man! Love watching your kraton progress! My kraton 6s is I'd say half m2c and half basher queen. Hope to add some more to my arsenal while using for videos as my cheat sheets lol

[@dysfunctionalrc6939]

That’s awesome I love M2C and basher queens stuff. Thanks for watching appreciate the feedback. 👍

[@pLaCiDMoOoN]

Loving the Vitavon upgrades/ the upgrades in general! I see your Kraton is going to be a BEAST! I'm doing the same with my Kraton 8s... Thanks for sharing👍🏾

[@dysfunctionalrc6939]

Thank you for watching 🙏

[@wadebarnes6720]

I have a question what's on the truck that was there when you bought it

[@fxrc3086]

Nice rig brother... ive got a few just like it👍👍

[@Hirthirthirt]

Same story with my Slash....I bouht a used one, then bought all the upgrades and did'nt really need the used Slash anymore as I had all the parts upgraded.

[@benszozda5280]

very similar setup here...lots of issues with rear diff gears...

[@10krms54]

The link for the esc mount not working where did u get it at i am doing same thing to mines thanks

[@dysfunctionalrc6939]

m2cracing.net/cars-and-trucks/545-m2c3320-6s-esc-plate-.html

[@owen8538]

I love my 4s Arrma 6s esc motor tho i use 4s battery m2c hinge pin upgrade and ecoboost 21kg servo so far upgraded will see how it goes from there :) i already got 2 much power as it is using 6s spektrum esc and motor

[@truthteller5539]

Awesome video!

[@wroman786]

Build looks amazing. I’m new to this and doing research for my first purchase on these trucks. Any tips on my first purchase ? Would love to get to this level asap. 😂

[@dysfunctionalrc6939]

Thank you so much! All depends on what you want to do with your truck and where you will be spending time running. The Outcast is more of a stunt truck for flips with that shorter chassis, the Typhon is more of a race truck better for handling. I like the Kraton because I believe its the best hybrid if all. Longer chassis allows more versatility for speed, jumping, control and overall bashing. I love speed and jumping. The first thing you absolutely need to replace is the under powered cheap steering servo. If you check out some of my other videos you might find other information that could help you. Good luck

[@wroman786]

@@dysfunctionalrc6939 I love speed and jumping as well and that’s what mainly what I’ll be doing with it. My choice is the Kraton EXB. I’m going to buy that one right now as I’m writing this. 😂 My thing is what motor, servo , esc and of course lean how to gear it.

[@dysfunctionalrc6939]

@@wroman786 i have been really happy with the torque and speed with my Hobbywing 1650kv motor with the max 6 ESC and 20-23 tooth pinion. I would recommend a good servo with 500oz of torque. Again this is all subject to opinion but that’s what I have enjoyed. A more powerful servo can never hurt, especially with off-balance landings and turning in tall grass. To ensure you don’t damage the nicer servo a definitely would recommending upgrading the server saver to aluminum or using one of the many methods people have come up with to stiffen it up.

[@dysfunctionalrc6939]

@@wroman786 Taller Aluminum servo mount with more than likely be needed as well.

[@wroman786]

@@dysfunctionalrc6939 Where is this server saver located and you know if a local Hobbie store will sell it ? I appreciate all your time and help with this.

[@letsgetitrc]

That top plate is awesome 👏 I got the hot racing one and haven’t had a problem but compared to that it’s total junk! Great build buddy 💪. Same system I want so let me know how she does with the new setup 💯 thanks for a awesome video

[@dysfunctionalrc6939]

Thanks so much for watching and your comments.

[@milehighspeedrc8412]

Motor mount is slick. Do you know what grade aluminum its made from?

[@dysfunctionalrc6939]

I believe it’s 7075 but here is the link practicalproto.com/products/grublock-motor-mount-for-arrma-6s-blx-platform

[@joseCalderon1976]

Nice build. Very expensive but worth it. I'm calculating that your build has about $1500 in it. Not as bad as my $2500 O8S and EXB K8S. Hehe. Heck even my Typhon 6s V3 with M2C, and HR upgrades is somewhere around $1k at the moment. Is it worth it? Heck yes! Hehe. Yeah that PPS motor mount is nice. I have a one on my Outcast 8s and Felony that I converted to 8s.

[@just719]

What is your top speed after upgrade max 6 combo? I got 58 miles with 20t pinion, it slower than my erevo with stock motor 20t pinion!

[@dysfunctionalrc6939]

Can’t keep the front end down to get a full speed but just over 60mph

[@shawnbarnett3607]

What size motor mount and slide is that?

[@dysfunctionalrc6939]

The Hobbywing EZRun MAX6 V3 Sensorless Brushless ESC & Motor Combo includes the 4985SL 1/7 scale, 1650kV motor

[@TTRC]

The build is looking amazing buddy. I have a similar 3d print fan mount on the same esc and it has been fine. Looking forward to seeing the final result. Sub'd you. 👍

[@dysfunctionalrc6939]

Thanks for watching. I really appreciate your comments. Can’t want to get this together and post a bashing video

[@EastTactics]

Fantastic video buddy! Really dig in the electronics and motor upgrade. And that motor mount is something sweet like nothing other. I really appreciate the shout outs in your video. Your mod box shipped yesterday I believe, so it should arrive on Friday or Monday. Can’t wait for you to get that thing put together and send in your jump competition video! The quality of your videos are really good and I have a lot of confidence that your channel gunna grow fast.

[@stuckintrees4796]

New subscriber bro.👍

[@linh811]

Why say 'kv' instead of actual motor size. The stock motor is 4074, or 4274 with cooling fins.

[@dysfunctionalrc6939]

The Hobbywing EZRun MAX6 V3 Sensorless Brushless ESC & Motor Combo includes the 4985SL 1/7 scale, 1650kV motor

[@Timson254]

How to triple the price of a Kraton!..Beautiful tho ☺️

[@dysfunctionalrc6939]

Can’t help myself lol. Thanks for watching

[@duc696monster6]

All upgrades 1000 bucks .meters driven since purchase car, 0m...

[@MuscleAKAOzzy]

That heat sink is ugly asf I got rid of it plenty more heatsinks that fit 1650😉

[@dysfunctionalrc6939]

Yeah it’s definitely different 😂 If you can please share your information on other heatsinks options. 🙏