The Charlie Show /// Episode 338 /// NEW Max 6 G2 Combos!

[@ExocagedRC]

YES!!! ITS TIME!!

[@AnthraxxRc]

I notice you said this new system is fully sensored my question is is the max 10g2 esc combo fully sensored as well or only on the lower end

[@S9RUT]

Hell yeah! Keep to see if these can outperform the MMX8S combo's for speedrunning 👍

[@GarcBomber]

They already beat the price easily, but the Mamba Monster 8S is 4+ year old technology...

[@1521joe]

Relax bro 😂

[@cjchannel12RC]

Nice, I might get some HW combos for my a couple of my cars and trucks the 4990 combo for my XO-1 and the 5690 combo for my X-Maxx and a Max 5 G2\56118 800KV for my Outcast 8s exb and a Max 4\70125 560KV for my future 30dnt.

[@johnnymckissick2735]

5690 1250kv going in my xmaxx! Ive seen a few you tubers running it with very good temps. I like that the max6 system will be lighter then the max5 with a 56118 can. LOVE IT!!!

[@elimackinnon8455]

Hey mate what motor mount did you use for the xmaxx when using a 5690

[@ayocxrry-2435]

@@elimackinnon8455 it’s best u go to m2c racing in look at they motor mounts for your model 🫡

[@Strungrat]

Liking my max6 g2 with the 5690 motor in my xrt. My only complaint is the bluetooth. It is nice to have built in but when it doesn't work with the current version of android a backup method would be nice.

[@10krms54]

Nice can’t wait to get one

[@runnerbaba]

Can the temp and co be shown on the Flysky Noble? (like the Axe Foc R2 with the newest update)

[@HOBBYWINGOfficial]

IBUS.2 is something we hope to add to more products but do not have an official time frame for all that to happen yet.

[@RC_Berserker]

Still a plastic mounting base… would like to see at least metal anchors. I ripped too many esc’s out of my rigs and hate the look of zip ties holding in my esc.

[@pandacrawler6x6]

Very Cool Review my Friend

[@gonzodetroitify]

What we’re talking about G💯🤩💥

[@CaptainCarling]

Which would be the best motor for the X Maxx for speed and power and what gear ratio would I need?

[@davidjohnbrandt2158]

So happy 🎉

[@dennpeetv8389]

Hi there, will the Max6 ESC works in 800kv motor, for akraton 8s or DBXL 2.0? Thanks in advance

[@rc_bash_performance]

Does the esc work with the 56113 800kV Motor too?

[@1999ekk24]

Does the max6 g2 have thermal protection? I cant find where to change from low to high or anything about it. I’m running it sensored and forgot to turn my motor fans on and after running through a battery pack I checked the Bluetooth app temp reading and the motor was at 120c. The car never shut off it was still running fine I just stopped the run to check on it. I was shocked and disappointed that a censored system would go over 105c potentially ruining my brand new set up.

[@m2cracing168]

YES!!! Release it!!!!!!

[@maximumroostrcboats509]

Nice!

[@deonhowardsr1904]

Will this fit n the Kagama?Thinking about trying this upgrade n the new Kagama. Thanks for you suggestions

[@Dragonphist1]

My brother has an Esc max g2 with a 1650kv 4990 with a 35T 1.5 mod and a 12T 1.5 pinnon and we are have trouble doing a willie and or even a standing backflip fill weaker than the stock motor any suggestion on what is going on we sink with the Bluetooth app as well still nothing

[@russellsplumbingllc4029]

Just installed max 6 in xmaxx went with the 5690 and now power, it will not wheelie or go fast top end... put stock motor back in and same issues. Tried app and setting . What could I be doing wrong? Traxxas controller?

[@josephcaruana9165]

Kindly do you know how much they could spin in rpm and if the Rotor is protected with a kevlar sheet or a stainless steel cover like the TP and Castle 8s motors?

[@gonzodetroitify]

Hi Charlie 🤘🏿🤘🏿 Is there a replacement rotor for the 2250kv 4278 motor please as I dremeled too far and damage the pinion shaft

[@thomaswalton9089]

Which motor would be best for the kraton 6s well i guess would be a 8s after this upgrade lol

[@shanehansen940]

With the motor sensor wire on this esc, will it fit in the Xmaxx like the previous gen?

[@CaptainCarling]

Yes, I've just fitted one to my X Maxx

[@KamikRC]

Question.. How’s the low speed control? Ex: for crawling in an Axial scx6? Would love to throw one of these in it for bashing/crawling!!

[@HOBBYWINGOfficial]

They have crawling mode, and while it's fine, it's not as "good" as a dedicated crawling combo so to speak.

[@shader7248]

Will hobbywing release a 4092 motor, or something larger than a 4078 but with the same diameter? Some of us can't fit the wider motors into our rigs, so a smaller diameter, but longer can would be great for cooler temps and more torque when space isn't available!

[@GarcBomber]

If you can't figure out a way to fit it, you probably shouldn't...

[@JoshuaRodriguez-ju7yy]

Can the g2 max 6 be paired with the 1100kv 5687?

[@JBsFPV]

Is a heatsink and fans required? Running in an XRT.

[@michaelyanez1528]

Can you match up the 5690 motor with the max6 not g2?

[@RakishRc]

Hi,.I bought the max 6 g2 for my xmaxx but after installing it's stuttering the motor a lot. Do you know if it can be fixed or what can be the cause of stuttering.

[@HOBBYWINGOfficial]

[e-mail] can assist with direct tech support.

[@Mark-yy2vw]

Will this run ok paired to a sensorless motor

[@CaptainCarling]

Yes, got one on my X Maxx with stock motor

[@carlosrubio7455]

Hola llevo Max 6 G2 y 4990 , lo he programado sin protección, y 180 km h se me corta y se cae voltaje. Sabes por qué puede pasar??? Llevo 2 baterías de 4s zeee 120c y la app marca mínimo voltaje 23v . No sé por qué corta si lo he programado sin protección. Ayúdame por favor

[@SuperDrake79]

Finally! 🎉😊

[@davideriz1489]

Is it possible to use motor 4274 2200kw on esc Max6 v3 160A? Thank you from Italy.

[@haroldpanganiban338]

Can it fit arrma kraton 4s?

[@1999ekk24]

No . Only 36mm motors

[@oliver-eb6pf]

Will it fit in an arrma notorious 6s v5

[@GarcBomber]

I’ve had a max 6 combo(4985) and 4292 in short wheelbase Arrmas, they both fit nicely with some ingenuity on mounting the ESC.

[@josephcaruana9165]

Kindly I purchased a Hobbywing Max6 g2 combo with 4990 1650kv sensor motor. I have some difficulties and questions about it and I sent four emails about a week ago but didn't receive any response. Do you know how much the motor should turn? Does the esc has a thermal cut off for the esc and motor? I also have the Max6 g1 and the thermal cut off can be adjusted and I am surprised how in the Max6 g2 it can not! What does the punch level and the initial throttle force do, do they also change the motor timing? Because I am finding difficult to keep the car straight when I use the turbo timing and the delay! Kindly could you make a video on the Max6 g2 combo maybe we could understand the principles and what we should do not to damage the esc, motor or the car?

[@HOBBYWINGOfficial]

You can email us directly, anytime, [e-mail] Punch is the response of the ESC to the Throttle input. Lower Punch slows down the response. Higher Punch, makes it more linear to throttle inputs. Initial force, is how the ESC starts the motor. Lower is smoother, higher is more aggressive. In this video, we do discuss the settings. kzbin.info/www/bejne/hanGiYyfm6tjbLs

[@ssoa473]

12S ..... TT

[@Jo_Fet11]

I just recently installed the max6/5690 combo in an xmaxx and the truck is running very slow. The data log says max. Motor rpm is 16,591. If my math is correct it should be closer to 37,500 rpm on 8s. Im running 29t pinion and 46t spur. Is my gearing just way off or am I having another issue? Any thoughts? Thanks.

[@TeddyAdams-hv7uk]

I'm having the same issue with a max 8 and I can't figure it out

[@itzronmds6452]

Did you guys calibrate the esc?

[@rccrawlingadventuresandmor979]

All that and no price said and no videos of it in use..

[@gradydeadsy6001]

Any idea of release date