Arrma Kraton 8S EXB RC. Fitting Castle Mamba XLX2, 8S ESC WITH 1100KV Motor.

[@clairecooper3848]

You’ve fitted some quality parts there bud . So glad you didn’t spoil it all with the XT90’s . Perhaps you heard me shouting at the screen DON’T DO IT 🤬

[@FullOnRC]

LOL I was dying to just get it complete but just couldn't bring myself to fit them.

[@clairecooper3848]

@@FullOnRC you know it makes sense 😊

[@FullOnRC]

@@clairecooper3848 I know but I spent all my money on this build and did'nt budget to spend any more on connections. Glad I found the extra cash. Wouldn't have been a smart move to put xt90's on this build for sure.

[@clairecooper3848]

@@FullOnRC yup ya dead right . Castle say minimum 8mm connectors , although there are a couple of people on’t ‘net that have gone with the XT90’s. “Ya can lead a horse to water” ehh! 😗😁

[@FullOnRC]

@@clairecooper3848 LOL! The price tag of the combo and the chance of it going up in smoke sealed my decision. Although comments on Facebook got me feeling like this combo is an out and out Firestarter either way.

[@readeracingRC]

I tried putting the same servo in my Kraton. The hobby shop said it was the right one. No it was not. I Dremeled, file, ground, spit, on it to make it fit....great vid brou.

[@FullOnRC]

Arhh that sucks. I wasn't a fan of how the servo fitted in the car TBH. Glad you got it in, in the end.

[@Sisu2280]

Bro, get some high quality hand tools. More than half these jobs you shouldn’t be using the power tip... it was a struggle at times. Plus you can strip out threads easily. Hudy make some of the best RC tools. Worth the investment.

[@tommytansley1097]

Can’t wait to see the next stage and see it running 👍👍

[@FullOnRC]

It was awesome. Steph ran herself over with it and ended up in hospital.

[@andreimschnee]

First putting all electronics in/on the receiver box and then get the whole box in the car was much more easier for me. By the way JX Servo HV2060MG 60KG fits perfectly and is under 30 Euro. I'm looking forward to your first run!

[@FullOnRC]

Cheers. I did think about doing it that way half way through. Will know better for the next time.

[@pLaCiDMoOoN]

Might holdout on a 12s system and go with the xlx2... thanks for sharing👍🏾

[@FullOnRC]

Yerhh it is awesome. Really happy with it.

[@pLaCiDMoOoN]

@@FullOnRC Nice!

[@islandrc-duke1972]

awesome install,great video

[@FullOnRC]

Cheers my friend. Glad you liked it!

[@erikedwards5744]

Wow sweet set up! I’m jealous lol

[@FullOnRC]

Yerhh it was good for a time, since moved it on though, Fond memories. 😍

[@robcanthandlestupidy9249]

This video is a excellent instructional.i built my kraton 1/5 because of you thank you brother also can I borrow that electric screwdriver?

[@FullOnRC]

lol Thanks pal. It's great to help each other. I got the electric screwdriver off Amazon pretty cheap.

[@Emily_xx5]

Nice 👍

[@FullOnRC]

Thank you! Cheers!

[@Marek_Z_RC]

Amazing car 🤩, great electronics 👍

[@FullOnRC]

We agree. I have heard good things, Hope it blows my mind first time I run it, just waiting on a few things to come in the post. Thanks for tuning in!

[@SLD-RC]

Nice👍 I've recently gotten a 1100kv hobbywing motor for my xmaxx after my stock one died....

[@FullOnRC]

Nice be interesting to see if it improves it any. Is the 1100kv better than stock Xmaxx motor?

[@SLD-RC]

@@FullOnRC definitely, stock motor is 1250kv. I will be running different gearing though.

[@FullOnRC]

@@SLD-RC Cool. I forget what gearing i'm running in mine 20/47 I think.

[@ImThatGhostz]

I have the mmx8s with the 800kv bent the shaft on the motor trying to decide what i should do. Either get the 1100kv with the xlx2 or just get another 800kv motor and keep the mmx8s?

[@alankowalski8781]

I like your videos. I just bought a K8EXB during the last sale. I wanted to run the Reefs Beast 1000. I am assuming I will have trouble fitting that servo?

[@FullOnRC]

I reckon so. It looks longer than others and you will have problems fitting servo saver. Take a look. kzbin.info/www/bejne/Y5mYg6dml8R1gsU

[@alankowalski8781]

@@FullOnRC ya, I saw that one already, but thanks man

[@jayputters615]

Where did you get tha battery operatedt screwdriver? that thing works pretty swiftly id like to own one

[@FullOnRC]

Cheers. It is one of these .... www.carousell.sg/p/electric-screwdriver-6nm-tacklife-cordless-screwdriver-2000mah-li-ion-45-accessories-with-9-1-torque-gears-adjustable-2-position-handle-2-led-light-usb-charge-storage-box-tdsc01p-1062723006/ Any decent one will do. Just get one with a clutch so you don't ruin threads. They are great for nipping up bolts. I got mine from Amazon but they don't list them anymore. Good luck with your search for one and cheers for tuning in.

[@maks-yaremenko]

Hey, thank you for the video, I have xlx2+2028 800 on the way, but found a lot of information that they could catch fire, is yours still ok? thinking to return mine. Thank you

[@FullOnRC]

I don't have the car anymore sorry. I think the fire issue was just first batch. TBH I think you will be fine. They are pretty good on warranty just in case.

[@boricuaguerero8823]

Did you ever notice that you forgot to put the two springs on the servo saver?

[@FullOnRC]

I did put the two springs; one is inside the other. 10:10

[@smolscale]

I want this esc combo for my outcast so bad but afraid of it catching fire.

[@FullOnRC]

My first one blew up but I got it returned and replaced. I think they have pretty much sorted that issue now.

[@andrewtexiera2858]

What size screws did you use for the motor it’s self? The stock ones that castle provides are way too small

[@FullOnRC]

Can not remember exact size sorry as I no longer have the car.

[@craiggreenhalgh1082]

Hi Paul, looking forward to comparing this to your Losi DBXL-E 2.0 , As I'm defo getting one of them, Where you getting the Zeee 9000mah from?

[@FullOnRC]

Hi @Craig Greenhalgh I got them from Ali Express and if you use Honey with Google Chrome you can get a pretty good discount. At least I did at point of sale. Good luck and thanks for tuning in.

[@Playstation5-d9u]

Can I use mamba xlx2 whit the hobbywing 1100kv?

[@FullOnRC]

don't see why not, not sure if bullet connectors are same size though.

[@Playstation5-d9u]

@Paul Fulton RC ohh on I think I change my mind I like better the xlx2 + 800kv 2028

[@Playstation5-d9u]

I found the combo whit the connector ready to run

[@easty6615]

Are those XLX2’s still spontaneously combusting or have they sorted it now?

[@FullOnRC]

No all good now. (I think)

[@hydroboy35th]

It was a small batch, the lot control numbers of the affected units were C27255, C27711, C27964 everything else is good to go.

[@clayton8465]

What did you end up with for gearing? I bought a exb today and a 1100 castle with xlx2.

[@FullOnRC]

29/39 Is what I ran.

[@evo165]

Hi buddy! U are really Arrma Kraton fan!! You got the best stuffs for both 8th & 5th scale Kraton! :) how does the 9110 servo holding up? Do you need to cut/modified the box to get the servo to fit in it? Thanks once again for the great videos!

[@FullOnRC]

The 9110 servo is great, Straight fit into the 8s Kraton, a bit pricey but it is good and in my mind you get what you pay for, Am I a Kraton fan, yes I guess I must be, the are epic RC@s the 8s Kraton feels a little delicate if I'm honest compared to the smaller EXB. Thanks for stopping by my friend and tuning in. CHeers.

[@evo165]

@@FullOnRC I am waiting for my local hobby shop to call me once the Outcast EXB arrive. If I am getting the 5th scale, think most likely I will go for the Outcast 8s exb than Kraton 8s exb.

[@FullOnRC]

@@evo165 I like The Outcast 8s exb, I like the Kraton 8s exb with the XLX2 and 1100kv motor, It shifts, although the DBXL is slower it feels better to drive., Let me know if and when you get your outcast 8s exb and what you think of it,, what esc motor are you thinking of putting in it ?

[@evo165]

@@FullOnRC I am planing for Spektrum 9120 servo, HW max5 with 1100kv motor. It seem to me the 1100 better suit for the slightly shorter Outcast than 800kv.

[@FullOnRC]

@@evo165 Wheelies for days.

[@fishininjun]

Now that is an EXB! I really wanna try the promax solderless connectors. super expensive but I really dont like soldering, and they have a crazy amp rating. honestly, If you aren't using it for speed runs or anything stupid, XT90's will do. I don't know why all the fuss, the anti-spark xt90's have a good amp rating and can take the heat (if you get the right brand).

[@FullOnRC]

Thanks for stopping by @Bow River RC. I just wanted a connection I could use and not worry about even after a few packs run through it. I read the XT90s are rated at 100amp. This esc it states in the instructions uses more so I just wanted to be safe. I have wanted these qs8-s connections for a while.

[@younghandsome225]

Hi I'm new to rc cars I have the kraton 8s for my first car I wanna install this same castel motor and esc I was wondering can I use a power hobby servo or do u have a better recommendation

[@FullOnRC]

Hey thanks for tuning in. I can not say on the servo sorry as I would want to be wrong. I can only suggest you ask in some of the Facebook Arrma groups in case someone has fitted it themselves. Hope you get good answers.

[@younghandsome225]

Ok thanks for replying im not on Facebook at all but thanks anyway

[@joeycrack509]

The savox servo would have fit with no problem using the 5th scale servo box that comes with the rig.

[@FullOnRC]

Incorrect. The Savox servo I used The mounting tabs are not located where they need to be for this car. The mounting holes for the Arrma ESC module did'nt line up and if you force it in, the pivot on the front servo saver binds on the chassis guard mounting where the bearing and servo saver swivel pin are.

[@joeycrack509]

@@FullOnRC check out RC Recon video part 1 kraton build. The savox fit with no issue. 4 other youtube builders use the same servo and it fit.

[@joeycrack509]

@@FullOnRC I've been on the fence with what servo can handle the weight of this vehicle. Loved your video 👍🏾👍🏾👍🏾

[@joeycrack509]

@@FullOnRC One more question some had problems with steering rack hitting the back of the 1100kv motor. Did you have to do any shaving?

[@FullOnRC]

@@joeycrack509 The servo I had hit the receiver box before it sat on posts. I thought the other Arrma module, the gap between posts was smaller?

[@freshej6]

Great video 👍 you happen to have a link to the pinion you use for the motor? I can't seem to find one that fits right

[@FullOnRC]

Search arrma spool. You use the arrma limitless spool.

[@freshej6]

@@FullOnRC Can I get the part numbe? r I want to be sure

[@FullOnRC]

@@freshej6 Z-ARA310950 Z-ARA310944 Depending what gearing u want to use.

[@freshej6]

@@FullOnRC awesome thanks for your help 👍

[@freshej6]

@@FullOnRC which one did you use ?

[@jamesrobinson4950]

Do you know how much these new tires weigh?

[@FullOnRC]

No sorry.

[@Playstation5-d9u]

The mamba xlx2 is better than max5 esc?

[@FullOnRC]

I could'nt say for sure as I don't own both. I think the Mamba may have higher specs. Have to research it.

[@Playstation5-d9u]

Look like the mamba is better is more🤑🤑

[@Playstation5-d9u]

I order my first rc outcast 1/5 exb I need to know what I need thanks you I watching your video to learning how to intall electronic 🔥👍💪 good job bro

[@patrickjago1436]

Does your original 56 motor mount fit with the 1100kv 2028 series motor? You only put 2 screws in? My mount does not fit all 3 screws :(

[@FullOnRC]

Only two screws fit the 56 series mount. I presumed thats just how it is with the 1100kv motor.

[@patrickjago1436]

@@FullOnRC OK thanks! Do you have any issues with "only" two screws?

[@FullOnRC]

@@patrickjago1436 Aint run it yet sorry, but other 8s I have use only two screws. I think it will be fine.

[@erikedwards5744]

I gotta know where you got that motor mount you put on when you slide the motor in place? Also a link to the servo

[@FullOnRC]

2 motor mounts come with the car, one for each motor type. The servo is totally overkill. www.modelsport.co.uk/product/spektrum-s9110bl-15-speed-metal-servo-1333083

[@Jeff.55649]

Are the QS8 from aliexpress legit?

[@FullOnRC]

How can anyone truely know what is fake these days. I bought these and they seem fine and do what they should. www.aliexpress.com/item/1005001374453409.html?spm=a2g0s.9042311.0.0.4f3a4c4d2UCwzu You may wanna make sure you spread the prongs in the plugs, I did'nt on one and it arced a little.

[@erikedwards5744]

I want to do the same to my Kraton

[@FullOnRC]

It's a great system.

[@cyberneticinterfacemodular3996]

Silly price for a servo £60 should do it.

[@ronniecreason7870]

Why would people spend all that money and buy cheap Lipos

[@FullOnRC]

Budget restraints, I heard good things about them when I bought them. Sold them on now after the Car sold. Didn't lose too much money.

[@robcanthandlestupidy9249]

The breathing should be replaced with some music

[@clayton8465]

Omg! Buddy why you beating yourself up with that shitty driver!! Check that thing in the garbage!! Nice build though.

[@FullOnRC]

Drivers?

[@clayton8465]

@@FullOnRC seriously? An electrical driver is defined as an electronic device designed to control certain parameters of the motor for controlling the electrical energy into mechanical power in a precise controllable way.

[@FullOnRC]

@@clayton8465 LOL I thought you meant driver as in a hex driver, A driver where I am from is "A driver is a software component that lets the operating system and a device communicate with each other." I would just call it an ESC.