Kraton EXB Mad Power 8s Hobbywing 1100KV !!!!

Jack build our second Arrma Kraton EXB with a mad power Hobbywing Max6 and 1100kv motor.
Get your Arrma Skinz here: www.arrmaskinz.com/
Check out our facebook page: / hardcorerc-10910420087...
Recommended items:
Excellent 25kg Servo: www.banggood.com/custlink/KKK...
GPS Speed logger: www.banggood.com/custlink/DGv...
SKYRC GSM020 Performance Analyzer: uk.banggood.com/custlink/vKmY...
Transmitters:
Flysky NB4:
Transmitter: www.banggood.com/custlink/KvK...
FlySky FGr4P Receiver: www.banggood.com/custlink/3vv...
Flysky FGr4S Receiver: www.banggood.com/custlink/m33...
Flysky FGR4 Receiver: www.banggood.com/custlink/DDG...
Flysky FS-CTM01 Temperature Sensor: www.banggood.com/custlink/GDG...
Flysky FS-CVT01 Voltage Sensor: www.banggood.com/custlink/KKK...
Low Cost excellent transmitters:
DumboRC X6 2.4G 6CH Transmitter: www.banggood.com/custlink/vmK...
Flysky GT3C: www.banggood.com/custlink/Dmv...
FlySky FS-GT5: www.banggood.com/custlink/mGm...
Chargers:
Hota D6+: uk.banggood.com/custlink/3Kmd...
HTRC T240 DUO: www.banggood.com/custlink/Gvv...
Lipo review and testing site: www.liporatings.com/
#rccars #rc #arrma #arrmarc #ARRMAHOF

[@KevinTalbotTV]

good vid boys!!

[@JackLee-yk4sn]

Thank u Kevin

[@HardcoreRC]

Thanks dude 👍👍 another good edit from Jack, might have to hang my editing boots up, his edits make mine look trash 😂😂

[@Alphabet7]

@@JackLee-yk4sn your edits are sick

[@JackLee-yk4sn]

@@Alphabet7 Thanks 👍

[@partyanimal263]

OMG This car is monster. I loved it...

[@X-KroLL]

On top of the bashing, the editing and music was 💥💥💥

[@HardcoreRC]

Thanks - glad you enjoyed it and for stopping by our channel 👍

[@jaayyboy28]

This thing is a monster!!!! Iv seen it in the flesh 🔥🔥

[@HardcoreRC]

Hehe thanks - its is a beast that for sure, scares me, but Jack seems to tame it very well 👍

[@maltemuller8194]

This Channel deserves more subs definetely

[@HardcoreRC]

Hehe thanks, we are still fairly new and subs are growing nicely, but more would always be welcome 😂

[@stuarttomlinson802]

awesome production !!!!! 10/10 massive power indeed !!

[@HardcoreRC]

Thanks - all these great comments on Jack's edit, he is going to be happy 😀

[@biltong3470]

always 100% awesome editing style loved it

[@HardcoreRC]

Thanks Dude, Jack edited this one and your comment will make him very happy 👍👍

[@unboxinglife7114]

Great video & brilliant EXB build here guys 🤟🏼 impressed

[@HardcoreRC]

Thanks dude, glad you liked it, lots more of this car to come 👍👍

[@g.bjumpsbashing3062]

Great spot dude...perfect jumps mate👑

[@HardcoreRC]

Thanks - love a little skate bowl action. Jack sure has tamed a total beast of an EXB 👍👍

[@saiiiiiii1]

Amazing what jumps RC cars are capable to do nowadays without breaking.

[@HardcoreRC]

I know its insane, not log ago fall off a curb and it would be broken

[@norcalrc]

Great job on the build and the edit on this video. And damn that’s a big pinion you got there. Going all out on this one

[@HardcoreRC]

Thanks Brother, yep Jack wanted to out do my EXB so went all out, advised by the power god Martyn Crease 😂😂

[@rcclan]

Awesome I just fell in love with mine again

[@HardcoreRC]

Thanks - its still my number 1 RC, although the XMaxx is pushing hard to take that spot 😂😂

[@rcclan]

@@HardcoreRC hahaha

[@ThunderxspeedRC]

nice kraton, I just got a arrma fireteam and a xmaxx, keep it up boys

[@HardcoreRC]

Thanks, you just got two very nice cars 👍👍

[@rccircus7271]

Loving new style vid !!!!

[@HardcoreRC]

Thanks, that will make Jack happy as he edited it, i dont have these editing skills 😂😂

[@2040RC]

Great video!!! Love the Kraton! Nice combo and video!! 😀

[@HardcoreRC]

Thanks - found the 1100kv a bit to heavy though especially with the 8s packs in, so have dropped down to an 1250kv Spektrum motor from the 8s cars as its a bit lighter

[@islandrc-duke1972]

awesome build and bashing

[@HardcoreRC]

Thank you - glad you like it, Jack did another good edit, may have hang up my editing gloves 😂😂

[@rwoods911]

These Arrma Skins are awesome. Just ordered a couple! Great vid!

[@HardcoreRC]

Thanks, yes the Skinz are awesome, great product and now available for a few other brands as well www.rcskinz.com/

[@rwoods911]

@@HardcoreRC hopefully they make some for the e-revo 2.0!

[@HardcoreRC]

@@rwoods911 Looks like just the Slash for Traxxas currently, but if you contact Adam he may well be able to make the E-Revo ones

[@adrianpilbeam7403]

Nice vid guys... Love the power upgrade...

[@HardcoreRC]

Thanks! 👍

[@JesseBMotors]

Nice rig and great bashing 👍🏁

[@HardcoreRC]

Thanks dude, glad you liked it 👍👍

[@ultrarcgasolina9890]

Só os melhores vídeos parabéns muito sucesso

[@HardcoreRC]

Muito obrigado 👍👍

[@skybasherrc2372]

Now that my Boys is a Monster. 👍

[@HardcoreRC]

Hehe yep, but the boys seems to have tamed it well - cant wait to really send this and so how it does 👍👍

[@craiggreenhalgh1082]

Very Nice Build & Good Driving as Usual 👏👏😉 I'm interested in seeing how this Exb holds up , As I'm still Wanting One & Your Set Up Is Top Draw 👌 👍

[@HardcoreRC]

Thanks, the biys put me to shame with their driving. Only things i have had to upgrade thus far is the rear hinge pins to M2C tool streel and the CRCu rear hinge pin holders. Stock hinge pins have been an issue on both our EXB's now

[@51im]

I use 3m vhb clear silicon mounting tape under my motor. You need to put some alcohol on top so the motor can slide about when fitting. Once the alcohol dries it's not going anywhere. you could also try filling a balloon with mastic.

[@HardcoreRC]

Thanks for the tip - will give that a try 👍👍. have some mastic under it at the minute

[@BarstoneRC]

Nice guys. That thing should be an absolute beast!!!

[@HardcoreRC]

Beast Mode engaged as i like to say 😂😂

[@BarstoneRC]

@@HardcoreRC So I’m thinking about putting the max six combo in my EXB or the V4 are you still running the 19 tooth pinion on that? And have you had any issues with overheating?

[@HardcoreRC]

@@BarstoneRC Yes im still running the max6 and 1650kv on my EXB on 19 tooth pinion, no heat issues, but do have the big fan on the ESC and also a heat sink on the motor, but tbh i dont think its needed. I did try 23 tooth, but it kept losing power when punching just before the jumps, have 21 tooth to try, but then though when i want to go really bog i can just put it on 8s power 😂😂

[@BarstoneRC]

@@HardcoreRC lol I think I’ll be good with the max six LOL but thanks for the info buddy I think I’m going to order one up for the V4.

[@HardcoreRC]

@@BarstoneRC Max 6 is a great all round ESC, its my go to one now. Might as well get two and have one ready for when you buy your XMaxx 😂😂

[@EJ-74]

Awesome rig for sure Definitely one of my favorites Great vid guy's 🔥👍 I

[@HardcoreRC]

Thanks - its been tamed a bit now with a 1250kv motor, the 1100kv hobbywing was just to heavy

[@jeremyhollamon1343]

Took me a sec. but very nice trick on the driver! The flag. Nice. Thanks man for the much needed magic

[@HardcoreRC]

Thanks for watching and glad you enjoyed it 👍👍

[@oxfordrc1613]

Well done Jack, great car and video 👍🏻

[@HardcoreRC]

Thanks dude, Jack will be happy you liked the edit. Car is a total beast, too much for me, but the boys have tamed it well 👍👍

[@oxfordrc1613]

@@HardcoreRC ha ha, they be taking over the channel soon 😉, it’s great to see them enjoying the hobby, hopefully it’ll stay with them for life 👍🏻

[@HardcoreRC]

@@oxfordrc1613 LoL - it was callum's channel in the start, i kind of took over when i got put on furlough to give me something to do all day. Never expected it to grow how it has that's for sure. Just enjoy that we all have a hand in every aspect of the hobby and sharing now - plus Jack does do a good edit 👍👍

[@oxfordrc1613]

@@HardcoreRC I see, great family RC channel 👍🏻

[@HardcoreRC]

@@oxfordrc1613 Thanks dude 👍👍

[@christheridge2179]

Great Vid. Very impressiv buildup. Got an exb myself, but "only" the Max8. Had to change the diff outs on the back, totally worn out, too much play. See how long yours last! Keep us posted. Could you use full throttle? I bet not!

[@HardcoreRC]

Thanks - was yours one of the second batch ? not had an issue with this one yet and run it a few times, also "MY" EXB (this new one is my sons Jack) i have not had an issue with the diffs since going to open with the 3 start plates. I do need to go over the diffs now we have run it a bit and change the oil. Full throttle is hard as the front lifts - but it is fun 😂😂

[@decorahomeimprovements3705]

Good job! Mates

[@HardcoreRC]

Thanks Dude, hope you enjoyed it 👍

[@highflying82]

Excellent .. exb power .. 6s is enough grunt to get me into trouble with mine .. heard u met my buddy Brad today 😎 hopefully we can get out bashin and crashing together soon 👍 that was a bleeding great video .. excellent edit

[@JackLee-yk4sn]

Thank u very much

[@HardcoreRC]

8s Power is too much for me as well, but this is Jack's car and build and he seems to be able to handle it 👍👍 Jack will be happy you liked his edit 👍 Yep met Brad today, was funny having this stranger come up and say are you HardcoreRC, but very flattering as well. Yep deffo need to get out with you soon 👍👍

[@highflying82]

@@HardcoreRC yea Brad loves ur productions as we all do you were only 10 mins around the corner where u were today make sure u thoroughly clean your weapons of choice from the day as that venue has alkaline in the dust and eats bearings alive .. Brad can run 8 on his max 6 setup on his exb .. will be keeping an eye on Jacks 8s rig to see the longtivity of the rear diff .. mines been bulletproof since logic uk installed the LSD plates .. all great fun 😎👍

[@HardcoreRC]

@@highflying82 Thanks for the info and will give the Xmaxx a good wash down (only had the Xmaxx out today). You should have popped down. did Brad show you the group photo yet 👍 Hopefully the rear diff holds up - im probs going to open the diffs up this week and change the oil, like to let them run a bit before changing the oil. Mine has been solid as well since i put the 3 star plates each side. Im sure Arrma have it sorted on these second batch now, if not i have a full 3 star open diff ready to go in. Yeah im going to run mine on 8s in the summer when we go for the really big jumps at the mega send skate park or at Paddlesworth.

[@skyworx524]

Nice air Jack

[@HardcoreRC]

Thanks - and this was just at trial run, still dialing her in 😲😲

[@mr_muncher199]

Thanks for the vid

[@HardcoreRC]

Your weclome - thank you for watching

[@donuttime2507]

Dad's sinister laugh as the kids scratch up the new body 🤣 Looks epic and editing matched the EXB 😎

[@HardcoreRC]

Hehe, it was a double sinister laugh, the scratched new body and that he had to go and get it 😂😂 good thing is Jack did the edit and even made a joke of him getting it - did you see the blooper right at the end ?

[@donuttime2507]

@@HardcoreRC cracking content mate 🤣

[@HardcoreRC]

@@donuttime2507 Thanks - its actually nice for me to watch it without knowing whats coming, thats the down side of doing the edit your self, you never see it how others see it

[@donuttime2507]

@@HardcoreRC love the EXB mate. Out my price range but thinking about either the Typhon or the limitless. Leaning towards the limitless as it would give me the year to buy the motor and esc. What combo would you recommend to hit the 100mph?

[@donuttime2507]

@@HardcoreRC yeah the lads are doing a great job with the video's...Remember not to let them have all the fun 😎

[@KurtsRCs]

Nice bash that is a big motor

[@HardcoreRC]

Thanks - its a monster motor that's for sure what is the saying 'Go big or go home' 😂😂

[@crawemer]

I've got the same setup but I'm running a 27tooth pinion to keep the heat down and i found it is running faster topend than the 29 tooth that was in it to start. I haven't put 8s in it yet just 6s. Plenty fast for me

[@HardcoreRC]

It certainly is stupid powerful, we actually ended up swapping the motor out for a 1250kv Spektrum one from the 8s cars, just found the 1100kv too heavy for major bashing. Hope your having fun with yours

[@TruSwagTv2]

Top notch

[@HardcoreRC]

Thanks 👍👍

[@GilboRC]

Great video guys really enjoyed it 👍

[@HardcoreRC]

Thanks - that will make Jack happy, he always worries if people will like his edits 👍

[@GilboRC]

@@HardcoreRC great video pal tell him to keep them coming 👍

[@HardcoreRC]

@@GilboRC Haver to get Jack to edit more, then i can just relax 😂😂

[@GilboRC]

@@HardcoreRC sometimes the editing is the best part 😂

[@HardcoreRC]

@@GilboRC Indeed it can be, i have to be in the right mood though, then when i get into it and it just clicks it does make you smile 👍

[@DestructionRC]

great bashin guys

[@HardcoreRC]

Thanks glad you liked it - lots more to come 👍👍

[@Alphabet7]

That's awesome

[@HardcoreRC]

Thanks, its a real beast 👍

[@Alphabet7]

@@HardcoreRC got any more videos on it

[@HardcoreRC]

@@Alphabet7 Just check out our page, here is another video: kzbin.info/www/bejne/r6qbgayehZaZptU

[@joseCalderon1976]

And I thought I was crazy for installing the XLX2 AND 1100KV motor with 35/47 gearing on my Outcast 8s 🤣🤣🤣👍. This is insane but fun 🤣👍

[@HardcoreRC]

LOL - it is a bit extreme, dont even have the radio set to 100% power its so much - but as you say its fun 👍

[@miketube6662]

Beast

[@HardcoreRC]

Total beast thats for sure 😂😂

[@AutoBodyEverything]

Great content and info!!! Music not soo good lol, sounds like an annoying chipmunk on auto tune. Hearing the rc operating is helpful so I want to say thank you for the good audio recording on the footage! Thanks guys!

[@HardcoreRC]

Thanks, Music is very hard to chose as everyone has different tastes, its one of the hardest things to do when editing in my opinion, but we do like try to only have it as background music if we do add it, unless its for a montage then we may drop the audio for slow-mo bits etc. Thanks for watching and commenting 👍

[@rcproponent2290]

Try fireteam shocks??? They handle the weight a whole lot better 💪🏻💪🏻

[@HardcoreRC]

Thanks for the tip, have actually taken that big heavy motor out now and gone with the lighter 1250kv Firma motor

[@gees5563]

Sick she a beast 💪💯🔥🔥🔥🏎💨 I’m waiting on my ARRMA SKINS looks awesome

[@HardcoreRC]

Thanks - total beast for sure, scares me, but the boys seem, to have it tamed 👍👍 Love the Arrma Skinz, want to get them all 😂😂

[@gees5563]

@@HardcoreRC I’m definitely getting another one 💯✌️

[@HardcoreRC]

@@gees5563 Which one have you got coming and which other one do you want ?

[@gees5563]

@@HardcoreRC I got the clown 🤡 looks like IT from the movie and I would like to get the middle finger 🖕 that says F**k you

[@gees5563]

@@HardcoreRC my next RC is the Tekno mt410 I live in New York in the Bronx not to many good places to bash I have to drive to get to them look like you have some great bashing spots by the way love your channel 💯💪✌️

[@kennethcraft6563]

Cool cool

[@HardcoreRC]

Thanks 👍

[@XxTrustNoOnexX]

🔥🔥🔥

[@HardcoreRC]

👍👍👍👍

[@Emily_xx5]

First 🙂awesome bashing at the skatepark

[@HardcoreRC]

Whoohoo - Emily is first - thanks 👍👍

[@Emily_xx5]

@@HardcoreRC very good jack love the editing 🙂

[@PeteR-ii4dd]

Hey mate, epic build! I am considerding getting the kraton with the same setup. Could you please let me know: > what are the max dimensions of lipos to doublestack them like you did in your driving vids. (mine are 48mm high, meaning nearly 10cm stacked). wondering if they fit into the kraton below the body > what do I need for mounting that beast of a motor and where do I get it? Thank you very much in advance for your feedback, much appreciated!

[@HardcoreRC]

The limiting factor on battery height is really the sliding front mount, easy option is just take that out and we also added another strap going round the sides of the batteries at the front, so it has the long strap going length ways and two straps going sideways. motor mount wise you need either a PPS mout of a M3 mount, both can be bought from here: badtouchbreakers.com/collections/kraton-6s/products/arrma-v4-screw-adjust-motor-mount or badtouchbreakers.com/collections/kraton-6s/products/arrma-5th-scale-motormount but both out of stock currenlty badtouchbreakers.com/products/arrma-v4-screw-adjust-motor-mount

[@bgill8821]

Where did you all get that Chassis Cover from⁉️ I would luv to have one. Thanks... Very NICE RC.‼️

[@HardcoreRC]

Chassis protectors are awesome, this is where you can get from www.arrmaskinz.com/ also did a video on them here: kzbin.info/www/bejne/fGTRp4V5lqqigck

[@Youworstnightmare77]

Nice super video 👏🏼👏🏼👏🏼 . Question .. wich motor mount it's that and what's the size?

[@HardcoreRC]

Thanks - this is the PPS motor mount with the 30mm slider for 50 series motors

[@markliddament325]

#superlovely project guys! Is that a skid plate designed for v4 that you're slapping on your v5 rear end there...?

[@HardcoreRC]

Thanks - this is an EXB Chassis, but yes its the standard RPM rear Skid plate, which should fit on a V5 chassis fine as well, only difference between v4 and v5 is the 3d formed ridges and slightly wider, you may been to trim the edges of the skid plate to clear the 3d formed ridges, but shouldn't be by much if any

[@jamesc5131]

Do you guys have a link to the gopro mount on the rear wing of the EXB? I just picked up an EXB myself and would love to mount a gopro. Thanks!

[@HardcoreRC]

That is actually a home made one, made a mold from a ridge one and then put hotglue in the mold 😂😂 but the ones i have made i get from Liam on this group facebook.com/groups/847155936085678 - very nice made out of TPU

[@ryansimmons4342]

Sick editing and great video! I jusy ordered my combo and can't wait for it to get here. Where did you get the mount for the motor and was there anything else needed to fit it? Appreciate any input!

[@HardcoreRC]

Thanks - the mount is a PPS mount: practicalproto.com/collections/frontpage/products/grublock-motor-mount-for-arrma-6s-blx-platform but if in the UK can get from badtouchbreakers.com/ just make sure you get the right slide for it 25mm for up to 49mm motors and 30mm slide for over 50mm motors

[@ryansimmons4342]

@@HardcoreRC appreciate the info. I'll be ordering tonight! Keep up the great work. Subbed!

[@HardcoreRC]

@@ryansimmons4342 Your welcome and many thanks for the sub 👍👍 enjoy your beast of a RC

[@ashfaqm36]

Do you have link for motor mount, looks awesome

[@HardcoreRC]

Here you go, depending on where your located you may have a distributor in your country: practicalproto.com/

[@user-tq9jg6kh6e]

32T Pinion gear? Insane.

[@HardcoreRC]

Yes but on a lower KV motor as only 1100kv

[@onemansvideos2134]

You need to do the Mojave chassis upgrade

[@HardcoreRC]

Already done, its been a Krajave EXB for a while now 😂 kzbin.info/www/bejne/d2bXd3l4qqyGkLc

[@christophermalcic3020]

What EXACTLY do I need to mount my 5687 motor in the Kraton EXB? I have everything ordered but need to know about the motor mount

[@HardcoreRC]

You will need either the PPS or MMM motor mount as that motor is too big for the stock mount - are you in the USA ?

[@Dickson219]

Hey buddy what kind of tape did you use for the body? And where did you get that chassis wrap for the bottom???

[@HardcoreRC]

Gyproc FibaTape Xtreme Plasterboard Joint Tape, chassis skins you can get from either Basherskins or RCskinz

[@videocardzrule354]

The chassy bender arm mc’crakn 2000

[@HardcoreRC]

Its an Arrma - what else would happen 😂😂

[@elijahsrcs6775]

nice vidio

[@HardcoreRC]

Thanks 👍👍

[@liamwaldron7885]

Can I ask where you got your motor mount from. Great vid lads

[@HardcoreRC]

Its a PPS mount, depends on where you live to where to get from. practicalproto.com/

[@Lonewolfoperations]

The motor mounts that come with the kit doesn’t fit ?

[@HardcoreRC]

Stock motor mount is only good up to 50mm motors - if you go with a motor of 50mm diameter you need a aftermarket motor mount

[@jessofalltrades6760]

What brand motor mount/ center diff housing is that ?

[@HardcoreRC]

PPS: practicalproto.com/

[@ZSMracing]

Love the vids and can y’all please let me know how the 1100kv works for you I put it in mine after the 1650kv but I’m going back to an 1/8 motor because I keep breaking the rear diff and pinions, also how many teeth was the pinion you used?

[@HardcoreRC]

Thanks Dude, if anything goes wrong with the diffs we will let people know. Was it on the EXB you were breaking diffs ? on the 1100kv we are running 32 tooth pinion on the 50 tooth spur. This is a second batch EXB so diffs should be shimmed right now

[@ZSMracing]

@@HardcoreRC yes it was the exb and I’d rebuilt the diffs a few times also using the lsd plates and shimming the gear mesh, I do drive my cars every day I can so there’s a lot of abuse on them, thanks for replying many people don’t😀

[@zacatecano1986]

Did you have to get a special motor mount ?

[@HardcoreRC]

Yes either the PPS or M3 mount as the stock mount will only go up to 49mm motor size

[@bradjrc196]

I’m also running the max6 combo in mine . What fan are you using on the esc ?

[@HardcoreRC]

Using the homemade one from here: kzbin.info/www/bejne/eYWvnZ5riZaBedU if you do get the Alza Racing ESC mount this is a new one with more support for the bottom of the fan: shop.alza-racing.com/en/makerzone/182-universal-40mm-fan-mounting-base-basher.html

[@MuscleAKAOzzy]

@@HardcoreRC nice vid as usual; what is the difference from old mount he has no photo uploaded?

[@HardcoreRC]

@@MuscleAKAOzzy On the old mount it didn't support the underside of the fan, so when mounted there was a gap between the heat sink and bottom of fan. On really big hard landings this meant the fan could still break, i started putting as small bit of high density foam between heatsink and middle of the bottom part of the fan. The new basher mount has a circular support now. Let me see if i can get a pic and put on my community page of the channel

[@arrmaboy_6508]

Where did you get that chassis protecter

[@HardcoreRC]

From here: www.arrmaskinz.com/

[@martinflawless675]

Quick question I’m using Spektrum 14.8V 5000mAh 4S 50C battery on my kraton 8s but it seems to give out a lot I’m thinking about going with another brand any recommendation on the best batteries to put in a kraton 8s I look for batteries on Amazon that people have recommended on KZbin but all I see is bad reviews it seems like on Amazon it’s a hit or miss

[@HardcoreRC]

Spektrum Lipo's do suck, they are over priced and not that good. What country do you live in as that will depend on what you can get, also how long do you want to wait as you can get some good ones from China but normally takes 3 weeks to arrive

[@martinflawless675]

@@HardcoreRC I live in the u items states send me a link where you purchased your batteries and I will check them out I don’t mind waiting

[@HardcoreRC]

@@martinflawless675 If for a 1/5th Kraton 8s then these: dxf-hobby.store/collections/car-buggy-truck/products/dxf-lipo-battery-4s-14-8v-8400mah-120c-240c-hardcase-lipo-battery-for-rc-hpi-hsp-1-8-1-10-buggy-rc-car-truck?variant=36450621096099 this is what i use in our Outcast 8s and Xmaxx 8s

[@FuckYouCommies]

What tape did you use to reinforce the body?

[@HardcoreRC]

Have found the best to be Gyproc FibaTape Xtreme Plasterboard Joint Tape 48mm x 90m and then either E6000 or Shoegoo

[@Justin-nr5gr]

A little help please mate. What's the part number for the motor mount in roll bar mounts you're using for this 110 KV setup

[@HardcoreRC]

Its made by a company called PPS: practicalproto.com/products/grublock-motor-mount-for-arrma-6s-blx-platform

[@Justin-nr5gr]

Thanks buddy you have the best vids out I tell u that.also do the roll bar mounts your using comes with that setup are their separate? If they are in fact separate what is the part number for them as well or can you just send me the part numbers to all of the parts you needed to make this combo work thanks mate

[@D-S0L0-1]

You got any kind of link to that motor/center diff mount?

[@HardcoreRC]

Its was made by PPS but pretty sure they have stopped for the moment, however this guy had done a direct copy, if you don't mind buying from someone that just directly copies someone else's design here you go: ramjamracing.com/?fbclid=IwAR1RBvWI6Ficy3qjWxY9rkwNwcRSAJ_m82RnulvxN84WZwYACFjQH5cJqG8

[@paulrakis]

Sweet video guys. what diff fluids did you use for it?

[@HardcoreRC]

Thanks - just using stock fluids at the moment, being LSD they adjust based on the load any way, not found any need to change the thickness on our other Kraton EXB, but will see how this one goes with the bigger power

[@paulrakis]

@@HardcoreRC wow ok. Yeh I was told the same LSD don't really matter of the thickness. I went 50k front and 200k Center 20k rear. Remember your rear end is open . I'm actually waiting for the LSD rear from horizon. All LSD is gonna be great

[@HardcoreRC]

@@paulrakis This is second batch so rear is LSD but set to minimum effect. I did start changing the fluid on our other EXB (First batch) but changed back after doing it as they felt so stiff with the LSD plates in. If the diff is slipping the LSD plates then limit the amount of slip, so in essence the LSD stiffen the diff when required, so way less need to try to tune with ticker oil. On my other EXB i do run the rear open with 3 star plates each side and have 20k oil in that

[@paulrakis]

@@HardcoreRC wow nice. Yeh I'm gonna rebuild my rear diff this week. Hope to get my EXB back online soon with all new fluids. I don't really run my car too much in the cold things can break easier. Over 50 degrees I go out bashing

[@HardcoreRC]

@@paulrakis Hope the rebuild goes well. Yep the cold sucks for bashing, but i would go mad if i didnt get out at least once a week. Bit like Rocky 4 - if it breaks it break 😂😂

[@josediaz6246]

Were can i buy those roll bar mounts

[@HardcoreRC]

They are part of the PPS motor mount, Would depend what country you are from. practicalproto.com/

[@ashfaqm36]

What pinion gear you using?

[@HardcoreRC]

Do you mean what make ? we tell the size in the video

[@derekquinones8614]

Where’d you get the motor mounts ?

[@HardcoreRC]

If in the UK from herebadtouchbreakers.com/collections/kraton-6s not sure outside the UK: but this is the make: practicalproto.com/ other option for this size motor is the 3m one - Bad touch also sell that one

[@arika.8926]

What servo do you run on the 6S EXB with 8S motor and ESC? 8.4volt? And what Kg torque?

[@HardcoreRC]

Our normal go to servo is this one www.banggood.com/custlink/KGmEociUy6 however in this car we used the uk.banggood.com/JX-Servo-PDI-HV7232MG-30KG-Large-Torque-180-High-Voltage-Digital-Servo-p-1074875.html?cur_warehouse=CN&rmmds=search the Max6 only has option for 6v or 7.4v so we run it on 7.4 volts

[@arika.8926]

@@HardcoreRC ok awesome thank you! Also what gearing are you using, I couldn't quite make it out on the video. Such as what size and T pinion and Spur

[@HardcoreRC]

@@arika.8926 on the 1,100kv motor we went with 32 tooth Pinion and the 50 tooth spur. We dont run this motor anymore though as its really too heavy for the big sends we do

[@leomarvinvirtucio9188]

hello where can i buy a motor mount for my 1100kv.want to install it to my kraton 6s

[@HardcoreRC]

Depoends where you live really - these were made by PPS but think they stopped making them

[@oldgeezer6470]

How fast was it with that monster of a build?

[@HardcoreRC]

One we made earlier just for you 😂😂 kzbin.info/www/bejne/r6qbgayehZaZptU

[@rexyrooholloran-uw7gv]

What mount was used

[@HardcoreRC]

we used the PPS mount for this motor practicalproto.com/

[@anythingadrenaline4515]

So what motor & esc were those?

[@HardcoreRC]

Not wanting to be rude, but maybe read the description and watch the video the information is all given, i even tell you what it is at 4:24

[@miles123rc3]

Hi guys, just got the EXB roller. Where can I get that motor mount please as I want to put the 1100kv in mine to :) Thanks

[@HardcoreRC]

Depends where you are located - its a PPS motor mount practicalproto.com/collections/frontpage/products/motor-mount-combo-for-6s-blx-cars?variant=32674535571507 although this one also works badtouchbreakers.com/collections/outcast-6s/products/arrma-5th-scale-motormount

[@HardcoreRC]

In UK PPS from here: badtouchbreakers.com/collections/outcast-6s/products/arrma-v4-screw-adjust-motor-mount

[@miles123rc3]

@@HardcoreRC Nice one guys. Thanks for that. I have the Max6 esc on the way so can now sort the 1100kv motor and the max pinion like yours :)

[@HardcoreRC]

@@miles123rc3 no problem, Its a bit of a beast :)

[@user-cl6zu7oh1h]

Please allow a link to the engine mount

[@HardcoreRC]

here is the link: practicalproto.com/collections/frontpage/products/motor-mount-combo-for-6s-blx-cars

[@user-tq9jg6kh6e]

What motor mount are you using?

[@HardcoreRC]

Was using the PPS mount practicalproto.com/products/grublock-motor-mount-for-arrma-6s-blx-platform

[@kallepolonen6407]

Can you link a pinion gear?

[@HardcoreRC]

Depends which country you are in ?

[@leroy5202]

Is Jack ever gonna take the Notorious back out?

[@HardcoreRC]

Yes Callum's notty will be back out - just put a Arrma Skin on it and have a new Blue Body, just limited in cars i can fit in my boot, and talion is his flavor of the month currently 😂

[@joshchatwin8569]

What motor mount is that

[@HardcoreRC]

Its the PPS motor mount: practicalproto.com/

[@isaackshirley4695]

What would he faster 800kv or 1100kv

[@HardcoreRC]

Would depend on voltage and gearing, at the same voltage then the 1,100 would spin faster but have less torque

[@paulhogg7659]

Ok guys I know this is a old post but been watching this build for a while just got the exb today and max6 combo where did you get the motor mount from pls as I'm not impressed with the stock exb one even less impressed that there's no motor mount screws with the max6 also what size is the pinion your using thanks and happy Christmas

[@HardcoreRC]

Motor mount is from: practicalproto.com/products/grublock-motor-mount-for-arrma-6s-blx-platform are you in the USA ? pinion on the 1100kv motor is 32 tooth and if your using a 1650kv then would suggest 19 - 21 tooth. The motor mount screws should have been with the EXB, have never bought a motor that had mounting screws. Just so you are aware we no longer use the 1100kv motor as its just to heavy really, the 1650kv motor is a far better choice

[@paulhogg7659]

Thanks for the info im in the UK and yes its the 1650 motor I've got can't wait to give it a blast I've followed your set up virtually the same even got the servo did you use the bottom spacers or top or both on yours thanks again

[@HardcoreRC]

@@paulhogg7659 From memory used both the spacers on the servo to lift it up as high as could away from the chassis. The PPS mount cant normally be got from badtouchbreakers.com/ in the UK

[@paulhogg7659]

Thanks mate only just figured out they have supplied a 23t servo horn need a 25 been a bit unlucky with it didn't get any bits with it no pinion motor mount screws or shims hope they redeem themselves and the diffs are perfect 😂

[@HardcoreRC]

@@paulhogg7659 I would hae a a word with who you bought it from regarding the missing screws, not sure they come with pinions now - i get min from here: www.rwracing.co.uk/product/cnc-1-module-steel-pinions-5mm-bore looks like they have one 20 tooth one left in stock. They only come with 23t servo horns now - used to be 25 tooth, but then they switched to 23 tooth to try to make people by Spektrum servos. If you got the DS3225 servo with the ali servo arm you should be able to use that, just used a longer M3 screw and some washers / shims to lift it up like this kzbin.info/www/bejne/jKjWZnyfpNGbes0

[@SerJeepRadiocontrol]

nicee bro!🤪🤪+1

[@HardcoreRC]

Thanks 🔥

[@acidstryker6809]

What motor mount?

[@HardcoreRC]

This was the PPS mount: practicalproto.com/

[@uptownfragrance6148]

What was that tape

[@HardcoreRC]

Presume you mean the tape at the beginning going onto the body ? just dry wall scrim tape the covered with ShoeGoo ro E6000 Glue

[@rcnetherlands5529]

I wonder how it would take an full speed crash into a wall

[@HardcoreRC]

Hehe, we will not be finding out 😂😂

[@jorehaast9887]

This is the 1/8 exb right?

[@HardcoreRC]

Yes this is the 1/8th EXB with an 8s system in it 😎😎

[@nsd6930]

Where did you get that mount fron

[@HardcoreRC]

Its a PPS mount - what country are you in ?

[@nsd6930]

@@HardcoreRC Philadelphia

[@HardcoreRC]

@@nsd6930 practicalproto.com/collections/frontpage/products/v4mount might be worth messaging as they often show sold out but have them in stock - just make sure you get the right size mount slider though - 25mm for up to 50mm motor and 30mm for over 50mm motor

[@nsd6930]

@@HardcoreRC thanks I did email him

[@jgotdawheel]

How did you gear it with that 1100kv motor ?

[@HardcoreRC]

Currently on a 32 tooth pinion and 50 tooth spur

[@jgotdawheel]

Thanks just got mine never geared a low kv like this

[@HardcoreRC]

@@jgotdawheel no problem, you may still need to turn the throttle down as its a beast on 100% throttle

[@jgotdawheel]

What about 47/34 I have a limitless spur and either the 47 or 39 that came with it what would you do ?

[@totalkiller4]

Wait is this the 1/5th scale or the 1/8th scale as the single battery makes me think it’s a 6s 1/8th scale ? If that is I’m definitely going to need to do this and send mine to the moon hahaha

[@HardcoreRC]

It the 1/8th Scale - hard to handle that power though, sop ended up changing chassis to Mojave one so its longer and also changing motor to 1250kv Spektrum one as that 1100kv Hobbywing is so damn heavy

[@marcoduenas205]

Whould you sell it ? I want to buy one built

[@HardcoreRC]

Unfortunately not, plus we have just changed it a bit per todays video, you might be able to get your local hobby shop to build you one, but they really are not that hard to build

[@pret98]

Are u know how to use the lock tight?its too much lol

[@HardcoreRC]

We have actually swapped out to a 1250kv motor from a 1/5th Arrma now- the hobbywing was just to heavy for the bashing we do

[@deepvoice2652]

What motor mount is that???😍😍😍

[@HardcoreRC]

That is the PPS motor mount: practicalproto.com/

[@deepvoice2652]

@@HardcoreRC that thing is nice!!!

[@HardcoreRC]

@@deepvoice2652 Its very nice, better for speed running though, or a smaller motor if bashing hard, we did manage to bend it, but the 1100kv motor is stupid heavy for bashing really

[@ubreakitirepairit3569]

I don't think you really wanted to send it to the moon.

[@HardcoreRC]

We could try for Mars 😂

[@The667tony]

Huge difference from stock motor?

[@HardcoreRC]

Huge difference - its like putting a Lamborghini engine an a mini 😂😂

[@The667tony]

@@HardcoreRC that's it! I'm getting the setup today. Xlx2 for esc tho.

[@The667tony]

Thanks, man!

[@The667tony]

I thought you had the original spektrum setup the kraton comes with. That's what I was comparing the hobbywing 1100 to. I forgot exb trucks are rollers. Too much weed. I have a outcast 8s and I'm ordering xlx2 esc and hw1100. Hopefully it is a big difference for me. I'm trying to back flip that beast of a truck.

[@HardcoreRC]

@@The667tony Just have the fire extinguisher ready for the XLX2 😂😂