ARRMA KRATON 8S // Official How To Guide: Electronics Module & Servo Saver Features

Although huge in size, the ARRMA KRATON 8S is designed to be easy to work on with a modular design.
The electronics module containing the Spektrum FIRMA SMART 16A ESC, waterproof receiver box containing the SR6100AT AVC™ receiver, waterproof Spektrum S905 metal geared steering servo and super tough servo saver is simple to remove and access anything needed. We guide you though the details in this video.
Want to see and learn more about the new release ARRMA KRATON 8S BLX, check out the links below.
Official ARRMA RC KRATON 8S BLX Giga-Site 🖥
www.arrma-rc.c...
Official ARRMA RC KRATON 8S BLX Action Videos 🚗💨
ARRMA RC KRATON 8S // ALL HAIL THE KING: • ARRMA KRATON 8S // ALL...
ARRMA RC KRATON 8S // RULE THE WORLD: • ARRMA KRATON 8S // Rul...
ARRMA RC KRATON 8S // HOLD YOUR BREATH: • ARRMA KRATON 8S // Hol...
Official ARRMA RC KRATON 8S BLX Technical Videos 🛠🧠
ARRMA RC KRATON 8S BLX // Under The Hood: • ARRMA KRATON 8S // Und...
ARRMA RC KRATON 8S BLX // Battery Installation and Cable Management: • ARRMA KRATON 8S // Off...
ARRMA RC KRATON 8S BLX // ESC Programming, AVC and Error Codes: • ARRMA KRATON 8S // Off...
ARRMA RC KRATON 8S BLX // Electronics Module and Servo Saver Features: • ARRMA KRATON 8S // Off...
ARRMA RC KRATON 8S BLX // Diff Removal and Features: • ARRMA KRATON 8S // Off...
ARRMA RC KRATON 8S BLX // Power Module, Centre Diff and Motor Features: • ARRMA KRATON 8S // Off...
ARRMA RC KRATON 8S BLX // Shock Removal and Features: • ARRMA KRATON 8S // Off...
DESIGNED FAST // DESIGNED TOUGH
www.arrma-rc.com/

[@Onkelrico]

Love the smirk on his face when he says” This is the Kraton 8S” 🍻👍

[@Onkelrico]

This is such a smart design. Only a few screws removed, take out all the sensitive parts in one shot, now you can just blast the truck off with a hose. Awesome!

[@jaguarsrcfamily101]

This is the wow factor we all wanted !!! Thank you Arrma you’re saving the rc hobby !! What a beautiful beast of a machine 🦾🦾 Arrma over everything ✅

[@Daywalker_Lee]

Before the official announcement... I Love it!!!

[@DanBuilds]

Interesting way to break the story of the new 8s Arrma Kraton. =)

[@airgunny7416]

is there any way to tighten the servo saver? mine turns like crap

[@RoadsideRC]

Interesting design. Thanks for sharing this.

[@rccarhobbyinarabic4088]

Creations arrma always made all new and distinctive 💜💚 ♥ ️🧡❤️😘😘😘😘😘😘😘👍👍👍👍👍👍👍👍👍

[@jasonbudd2950Jag]

Luv the SIZE of this monster truggy. Hopefully should make it easier for my old shot eyes to work on!! BEAST 💪 👊 #ArrmaKraken

[@ficosk8]

It´s a great RC car. I have played a couple of times with my daughter on deeper grass and it rides great!. On our last ride on gravel something went weird. It only steers under load to one side. I cleaned it up but did not find any stones blocking the servo. Read somewhere about the servo saver. Probably I´ll need to service the saver and hope that the servo is OK...

[@JohnSmith-lk8me]

Thanks this video is very helpful.

[@BlackMetalRC85]

this System is not bad! 👍

[@imserious2187]

My wheels turn more to the left than the right, is my servo going bad or is something not lined up properly?

[@lube9036]

Something may not be lined up correctly. I had this problem twice on OUTCAST 8S and KRATON 8S

[@imserious2187]

How would you know if the servo saver is bad or getting weak?

[@imserious2187]

Does anyone have a video showing how to adjust the servo saver?

[@Bawla187]

Beast 👍🏿

[@jonspikes4935]

I'm thinking of buying one you know about how long it takes to install all the equipment to get it up & running?

[@EXTREMERC416]

Dont forget to use treadlock on the servo saver screw when it treads on the servo

[@lube9036]

Absolutely :-)

[@jonspikes4935]

Been thinking of buying one be my first 1/5 scale roller i mainly get the rtr's you know about how long it takes to install all the equipment to get it up & running?

[@TDAmeritrader]

Dear Arrma team, I just got a brand new Kraton 8S (it is definitely a V2 at least.. as I said, is brand new), and to be honest, I wasn’t pleased at all with the equipped servo. So I bought a “AGFRC Giant Scale Servo 1/5 2S A280BHLW brushless (100kg). But the mechanic at the store, told me that I need a “Servo Saver” in order to being able to install the servo. So here’s my request; could you please tell the specific, exact “servo saver” that I need to buy? Thank you all so much.. greetings from Chile!

[@paulclancy2404]

What not even out yet we rebuilding haha , hopefully first orders be in by xmas ik my infraction came alot later than said

[@jaykay5945]

When I turn the wheel on the transmitter, the module turns, but the wheels don't turn. Is that the plastic piece that you had taken out last?

[@ericniestedt304]

Does the servo safer need to be centered in the up direction ?

[@johnshuppas2854]

What are the bullet connector size

[@jcallesano]

So my Kraton 8s steering doesn't torn back to 0 and is really hard to keep straight now. Is this my issue?

[@RCBASHERSUK]

How does the steering arm attach to the servo saver? At the top of the servo saver.. as mine has come off and made the truck have no steering in its first bash.. was just driving around and doing small jumps. Very small jumps. I found a screw in the chassis which I am trying to put through the servo saver into the mechanism on the steering arm.. but its screwing on slightly and then just spinning.. every time I test the steering the whole joint is coming loose and the screw comes out. This was its first bash which I will be posting the video of tonight. It wasn't really rough treatment and the X-Maxx it was up against is perfectly fine. Please help as the truck is now a very heavy/expensive paper weight. Thanks in advance.

[@theirishaxe9405]

Can i run the stock servo on 8.4v? Is there any other bec option in between stock and 8.4? In the manual there's only two options in programming stock then all the way up to 8.4 if i use a programming box can i get 7.4 or is there really only two options for bec? Really low or really high?

[@jkclawncareandlandscape5880]

My local hobby shop just ordered me two of them one in green one in orange

[@jkclawncareandlandscape5880]

I’m so god damn excited man . Thank you guys so much for making bad ass rc . I also have a typhon 6s and outcast 4s and 6s from you . This is got me so anxious 😂😂

[@EXTREMERC416]

Have fun!

[@jkclawncareandlandscape5880]

Surchaufeur thank you I definitely will for sure

[@alexalex6883]

Hi i bought a arrma kraton 8s. on my second run my transmitter stopped responding I have been trying to rebind the transmitter and Receiver with no success. The issue I’m having is once I turn on the power and press the button on the receiver to bind I’m getting the flashing light which is the right response. however once i press the power and bind button on the receiver to bind with the receiver the flashing light on the receiver turns off where it should stay on for the binding process. Can you please advise me on what actions I need to take from this point on ?

[@lube9036]

Hey, you should watch officials AVC tuning / binding / calibrating SPEKTRUM videos

[@lube9036]

It could help you, it helped me with binding and AVC issues on my Kraton and Outcast 8S

[@lube9036]

kzbin.info/www/bejne/nXO7lp-cqZllaqM

[@lube9036]

kzbin.info/www/bejne/rZ6zkqeLlttlntk

[@armandoloureiro7158]

Nothing to do with you video. But I have a question. I switch my spektrum controller on. I switch the car on. But then nothing happens. Can't go forward or backward and the steering does not work either. New batteries in the controller and fully charged batteries Please help. Thanks

[@302BAGGER]

What do I gotta do to get that demo car ??!!!😊

[@cwatson42785]

Why did all this stuff come out before the premiere that was supposed to be at 11am?

[@topchoice32]

What's the name of the screw driver u are using

[@r4nd0mrcfun54]

its this one which has been rebranded in different regions now www.amazon.co.uk/Hitachi-DB-3DL2-Cordless-Screwdriver/dp/B005F4XTTU

[@NepDouble07]

Is it safe to run the S905 servo at 8.4 volts?

[@Ruben.vandb1]

Is it?

[@NepDouble07]

@@Ruben.vandb1 I still have no clue, but according to the manual the operating voltage range is from 6 volts to 8.4 volts. But when you search the servo up itself, it says 7.2 volts max.

[@LawrenceTimme]

That servo saver looks awful 😕 made it much harder to use an aftermarket servo. Very annoying.

[@rushgush]

Lawrence Timme well if u wanted a better servo, it’s just a change once. so not a big deal

[@LawrenceTimme]

@@rushgush it's this a none standard size and spline though, it's 15t.

[@EXTREMERC416]

Mhm maybe but servos of that size might have adapters