The video I've been looking for, for a week. Exactly what I wanted to see. Thanks!
@highflying822 жыл бұрын
No probs ..glad it helped in some way 👍
@SpeedSyko3 жыл бұрын
I’ve got both setups. I run a 27 tooth on the max 6 1650. Its a powerhouse. I ruin tires on 8S in one run. The best case scenario the foams internally rip, but tire doesn’t doesn’t explode. Gearing up with decent fans “not expensive game changers” keep it cool. Power to weight ratio is key with anything. Max6 15$ fans speed gear off a felony and 75-130c batteries 6s. Seems to be the sweet spot. For me anyway. Loved the video!
@highflying823 жыл бұрын
cheers mate.. I have gone to a 15t on my max8 suits the right technical tracks we bash at .. think brad with the max6 is still running 21.. I'm running 65c overlanders ..but will be getting some 140c rapids .. 😎
@SpeedSyko3 жыл бұрын
@@highflying82 yikes! Nice!
@RCunexttuesday4 жыл бұрын
The exb is a work of art, absolutely stunned at what it can shrug off🤯
@highflying824 жыл бұрын
Can't wait to get it back ..it's having the rear diff rebuilt by Logic
@RCunexttuesday4 жыл бұрын
jeff nicholls a lot of people seem to be having trouble with the rear diffs, I guess we just got lucky with ours... sent it to hell and back, cracked a hub and sheared a screw in half - happy days👀👍🏼
@highflying824 жыл бұрын
@@RCunexttuesday some exb are OK it's initially an issue with shims.. wrong ones were used in alot from factory .. my mate stripped his diff down after first run to find barely any oil .. he hasn't had issue with his max 6 powered exb so far .. I had an issue with steering rod vibrating the hex screw undone ..easy fix ..👍
@FarmerFpv2 жыл бұрын
On the race track the max 8 in sensores mode will mop the floor with the max 6 combo. The new max 8 g2 with 4278 2250kv sensored motor is a rocket ship on 4s and 6s. Best combo for 2022 imo.
@highflying822 жыл бұрын
It’s a great combo. 2200 max8 is a whippet on 4s and 6s 👍🏻
@lawrencejones5533 жыл бұрын
Couldn't resist it anymore, just ordered a 1/8th Kraton EXB. Planning to install exactly the same electrics as my Mojave EXB - Max8/2200KV with 14t pinion. I've been watching loads of videos on the Kraton and it's great to see them actually being raced for a change!
@highflying823 жыл бұрын
Congrats mate .. check back thru my vids for offroad race days .. mine is very capable .. running 2200 max8 and 15t pinion
@freddieparrydrums3 жыл бұрын
Same here bud
@jeepcherokeeguys Жыл бұрын
Getting my EXB roller next week....got the max8 combo I'm stuffing in it too :) what pinion would you recommend?
@highflying82 Жыл бұрын
I was using 15 most the time on 6s ..If u use the 4s backflip tires on 4s on the 2200 kv setup u can use a 16 pinion which provides tons of low torque and a good top end.
@evo1652 жыл бұрын
Hi buddy, nice video!! Am looking same setup at your max8 2200kv with 15t pinion. Do you face any heat issue on motor? With fan? Thanks.
@highflying822 жыл бұрын
Hi mate ..cheers .. i am running heat sink with fan on motor and extra fan on esc .. all good .. will mostlybrun a 5000 6s pack through to safe cut off without thermal cut off interupting .. 15t works well 👍
@Tegridy_Rc3 жыл бұрын
Nice dude I’ve been wondering how well the different setups ran!
@freddieparrydrums3 жыл бұрын
Yep got meself EXB with Max8 2200kv combo bang good servo 😃
@highflying823 жыл бұрын
she goes well with good overall power on a 15t pinion 😎
@steeldingus26574 жыл бұрын
Hi Jeff. You mentioned you're using a gyro. What brand? Is it a stand-alone unit, or integrated into the radio gear? Thanks. Paul.
@highflying824 жыл бұрын
Hi Paul .. it's a spektrum RX TX that comes stock with the kraton 8s .. gyro is integral in the RX .. it's a spektrum dx2e with AVC dial so the gyro can be adjusted from TX .. I'm quite pleased with it .. 😎👍
@steeldingus26574 жыл бұрын
Thanks Jeff. I'm in the market right now for a new transmitter setup. I was looking at Spektrum (mainly because I use it for all of my planes), but was unsure if I want to bother with the AVC or not. I like the idea mainly for a smaller, less stable car.
@highflying824 жыл бұрын
@@steeldingus2657 search for 'radio link' .. fair price and apperently very good transmitter with no latency. . Comes with 2 RX .. one with gyro one without . Multi model memory .. I also use spektrum for my planes .. got about 60 speky receivers 👍
@kevinj52934 жыл бұрын
Great video jeff you got her all dirty 🙂 you can see the kraton wants to rip take it easy and bed those tyre's in👍👍👍
@highflying824 жыл бұрын
Cheers mate .. just reprogrammed max8 level 5 punch 😆
@joshchatwin85693 жыл бұрын
I got the max6 but using the 2200 4274 motor with 18tooth pinion no problems am using duel 28k rpm rocket fans tho
@highflying823 жыл бұрын
good esc and motor combo.. all I would warn is the 2200 gets hot and cooks .. 18 would work well for high speed stuff but will get hot with low down pulls ..I would drop to 15 or 16 to keep the amps and heat down .. 👍😎
@joshchatwin85693 жыл бұрын
@@highflying82 Iv had no problems mate it don’t get hot I got the noble nb4 and it tells me temps of the motor worth the temp sensor worth the fans on it don’t get hot
@rcflashcars3 жыл бұрын
nice number of views! if only a part had the good feel to hit the subscribe button...
@blazejames50782 жыл бұрын
Any issues with the max8 overheating?
@highflying822 жыл бұрын
I have a motor fan so it stays cool .. no problems with thermal cut off 👍
@DGCON444444444 жыл бұрын
Great vid
@edogawacorgi Жыл бұрын
Using max 8 g 2 combo in my exb. It is so fast 😮
@highflying82 Жыл бұрын
Experiment between 14-17 pinions for different power ranges 👍🏻👌
@JTVR774 жыл бұрын
Where was it Jeff / taylor
@Nathan-qt2zi3 жыл бұрын
Which one would you say is better and can max 6 run 8S?
@highflying823 жыл бұрын
Overall the max6 combo with the 1650kv is a stronger setup slightly heavier but if your considering running 8s then the weight to power would equalise .. even on 6s the max6 has a phenomenal amount of grunt .. if u are thinking 8s yes will run it bit the rear diff would probably be short lived .. on 6s the rear diff and front are recommended for 10hour run time sevice intervals .. Arrma recommendation .. another option is the 2200 kv max8 motor running a max6 esc .. more power then max8 combo on 6s but 8s would burn the max8 motor up .. all in all if u can afford the max6 combo then that is the way to go 😎👍
@highflying823 жыл бұрын
Check out the max8 vs max6 on dirt track .. repsol exb is my max8 and the chameleon exb is max6 .. also the black notorious in the video is running max8 motor and max6 esc all are running 6s kzbin.info/www/bejne/r17Eop9_nNKJgZI
@Nathan-qt2zi3 жыл бұрын
@@highflying82 I have a typhoon 6s v4 so when I get my exb the esc and moter from that will go in it till I can afford my max6
@highflying823 жыл бұрын
@@Nathan-qt2zi that would work just fine 😎 .. prob best to use a 15 or 17 tooth pinion with the stock blx 2050kv setup I'm using 12tooth on the 2200 max8 .. u must check your rear diff on exb to see if the arrma mod has been done .. the update was for them to fit lsd (lmtd slip diff) plates to spread the load in the diff ..if the mod hasn't been done arrma provide the update kit to fix the shim issue .. without this mod the diff will strip inside 2 runs .. any other info u need just message me 😎👍
@Nathan-qt2zi3 жыл бұрын
@@highflying82 I am not very good with diffs I'm scared I will put it back together wrong but I will give it a go. And thank you for the help
@russellparker45683 жыл бұрын
Have you got the cap packs fitted in ypur max 8?
@highflying823 жыл бұрын
No I didn't fit the cap pack. Haven't had any issues over 50+hrs run time 👍
@russellparker45683 жыл бұрын
@@highflying82 oh ok, nice!! I have the same setup to build up. What kg servo did you go with?
@highflying823 жыл бұрын
@@russellparker4568 I am currently using a 'macgregor mg5921hv' 20kg / 0.12s .. it's been bulletproof so far and it has had a lot or whacks and hard use .. also with ur max 8 .. up the punch level to 5 it will make an enormous difference in performance
@russellparker45683 жыл бұрын
@@highflying82 i will do! thanks for the advice Jeff.
@FullOnRC3 жыл бұрын
Good stuff my friend.
@highflying823 жыл бұрын
Thanks mate .. i have learnt a lot since these first runs ..that the exb is awesome ..punch level 5 on the max 8 really livens it up .. 😎👍
@DadsRCHangar4 жыл бұрын
Great fun Jeff👍🏻
@highflying824 жыл бұрын
Really good fun mate .. when there's a few drivers it's race on and adrenaline pumping .
@DadsRCHangar4 жыл бұрын
jeff nicholls yea I bet that becomes even more fun racing against other people. 👍🏻
@brandoncollings91223 жыл бұрын
Any heat issues with the max 6 combo on 21 tooth pinion?
@highflying823 жыл бұрын
It as far as I know .. it now has a couple of fans on the heating to keep cool 😎
@brandoncollings91223 жыл бұрын
Nice, I'm going to go this route soon and wasn't sure what pinion I should run.
@highflying823 жыл бұрын
@@brandoncollings9122 the max 6 exb is my mate Brad .. he does quite a bit on his channel .. drop him a message and he will happily tell u what his experience has been with the setup .. kzbin.info/www/bejne/fGK7aIOjmJh1hrc Think he was running 21 or 23 pinion can't quite remember 😎👍
@brandoncollings91223 жыл бұрын
I'll do that thanks! Great vid btw
@highflying823 жыл бұрын
@@brandoncollings9122 .. if u want to see what the max 6 vs max 8 exb perform like on a dirt coarse (check link).. my max8 exb is the repsol rig and brads max6 exb is the chameleon rig kzbin.info/www/bejne/r17Eop9_nNKJgZI
@JTVR774 жыл бұрын
Nice one 👍
@gamebosan59653 жыл бұрын
2200kv should run 18t enough torque and power
@JTVR774 жыл бұрын
And what is yours
@highflying824 жыл бұрын
Hey Taylor . Mine is the max8 and brads is the max6
@damaylaphoenix11554 жыл бұрын
put a 17t in that 2200kv and give them a go!
@highflying824 жыл бұрын
I'm gonna try a 15 and 17 .. punch uped to level 5 made a huge difference with power delivery on the 12t
@nickhathaway46173 жыл бұрын
What is the better of the two I went back and forth and ended up getting the Max6 1650 now I'm wondering if I should have got the max8 if I got the max 8 I would have been wondering if I should have got the max6 lol it will be here tomorrow going in my Talion
@kawikarios20177 ай бұрын
Why do people still put Music in their videos This, not the early 2000s anymore hahahaha Had to skip past the roller skating Music