ARRMA KRATON 👍 Hobbywing max6 & 1650KV install and Bash bonus footage of the V4 Kraton

ARRMA KRATON Hobbywing max6 & 1650KV install and Bash with V4 Kraton Bash. Incredible install of the super powerful Hobbywing 1650KV into a ARRMA KRATON and first bash video. The rig performed amazing and some incredible jumps. Then at the end V4 Kraton bonus footage I LOSE A WHEEL. :) BASH ON 😎😎 #bigair

[@ianbudgetrc2574]

That triple flip was crazy!

[@lridebashitrc9422]

Thanks for watching and the comments much appreciated. If you watch some of my others I got 5 with the Outcast. So much fun I never imagined you could bash these this hard. Bash on 😎😎

[@georgepace1145]

That was great jumps mate.

[@lridebashitrc9422]

George Pace Thanks for watching and the kind comments. Yeah this rig rips no problem. Bash on 😎😎

[@CommanderAstigRC]

Awesome max6 combo upgrade brother. That Beast got tons of Power 💪. Good call on the 20t pinion she's a rocket🚀 with that pinion. Awesome jump session. Killin it on the Ramps. Getting some great heights for sure. Keep em coming Bro.

[@lridebashitrc9422]

Yeah total beast of a rig now with that and all the upgrades. Lol I was trying to take it easy, but that thing just wanted to fly. Instant power. 😇 Trying to keep up with the commander.. 😎😎 Bash on

[@rockyrc9942]

Thanks for the upload brother just got the v4 Kraron ans wanted to get a different power plant and was looking into this same set up thanks!

[@lridebashitrc9422]

Thanks for watching and the kind comments. Much appreciated!! Yeah this V3 was a killer setup crazy fast. This Max6 and 1650 are now in my Mojave hybrid. Killer power if you are thinking about it. In my V4 Kraton I’m running the Kraton 8s spectrum system. Bash on thanks for the sub. 😎😎

[@cktennessee2356]

Max6 combo is butter smooth. You can definately see the difference between the 2 cars. Great Vid. Just subbed & smashed.

[@lridebashitrc9422]

Yeah huge fan of that Hobbywing combo. It’s still alive In my Mojave hybrid. Thanks for watching and the kind comments brother. Bash on 😎😎

[@jotcw81]

@@lridebashitrc9422 Do you have experience with sensored systems and how does it compare to them? Thx & great vid!

[@lridebashitrc9422]

@@jotcw81 Thanks for watching and the comments. Yeah I have installed a Mamba Monster X system or two and they are incredible just a little pricey for me. The sensored systems are smoother, but for a basher the HW for the money is perfect for me. Bash on 😎😎

[@CF_Joel]

That’s what I got and installed just last night in my Notorious, including 20t pinion. Version 4 Arrmas don’t need any motor mount modification to install this motor.

[@lridebashitrc9422]

Thanks for watching and the kind comments 🙏. That power plant in a notorious is gonna be crazy power. Yeah the V4 motor mounts are a little taller allowing for larger cans. Well enjoy that configuration is one of my favorites. I would recommend a screen for the Max6 and getting some extra fans that’s one of the Max6 weak points. Bash on 😎😎

[@CF_Joel]

@@lridebashitrc9422 Thanks for letting me know! I did some research and someone on arrmaforum said the fans break because it is hovering above the heat sink, so when you land, it flexes down and those tiny bars holding the fan snap. Another person said he glues a small washer to the center of the fan so it posts on the heat sink and doesn't go anywhere.

[@MrAntonio73ct]

Good to hear. Ordered the Max6/1650kv combo for the Kraton EXB.

[@FLSharkdiver]

i AM thinking about putting in the same combo motor and ESC in my v4 Notorious... How do you like it?

[@CF_Joel]

@@FLSharkdiver it ROCKS! I have a video on my channel. Speeding back flips! It self rights so easily.

[@RCbashingtheKRATON]

Awesome combo for the Kraton,,nice launches..👊👊👊 subbed too

[@lridebashitrc9422]

Thanks for watching and the sub it is much appreciated 🙏. Yeah I really love this setup crazy smooth and just endless power. 👍👍. I highly recommend it the system is quieter than the blx and so powerful. Got some mod ideas from you. 👊🏻👊🏻. Bash on 😎😎

[@styleyriley]

Gonna be dropping this setup in my Kraton EXB this weekend, can't wait to see what it does.

[@lridebashitrc9422]

Desert RC Oh man it will wickedly sick. I’ve now moved this system onto a Mojave Hybrid and it’s such a great power house. Good luck and thanks for the comment. I’d recommend 500k in the center it did better with that change. Bash on 😎😎

[@styleyriley]

@@lridebashitrc9422 Thanks for the tip!

[@jhe1967]

I need to know where ya got the ramp from?

[@MuscleAKAOzzy]

I just had max6 combo installed and it is perfect 👌 Power on demand normal temps with 20t 1650kv is way more silent than 185blx I took your advice ;)👊👊

[@lridebashitrc9422]

MuscleAKAOzzy Killer setup with my rigs power for days. Bash on 😎😎. Thanks for watching and the kind comments.

[@BulldogsRC]

Are those bands on the front tires? How is that working out?

[@lridebashitrc9422]

This was a couple years back. They were tough to do and lasted maybe 3 or 4 months. They did help with ballooning just not sure they were worth the trouble and now in my opinion the tires are better anyway

[@wiling924]

How long it will last on 11.1V 5700mah battery?

[@radrc]

Can't wait to get this combo in my outcast 6s exb. Do you ever run 8s on this combo or just stick to 6s?

[@lridebashitrc9422]

Yeah I always kept it on 6s you can barely keep the tires glued on that. It’s wicked fast on 6 and that combo makes the rig pretty heavy so anymore weight would just make for more breakdowns. Bash on thanks for the comments.

[@radrc]

@@lridebashitrc9422 thanks for the tip!

[@passionemodellismo6466]

runned on 6 or 8s?

[@creekhunter5060]

This video woulda been alot cooler if you were the one driving that sweet Toyota Tundra......regardless, the Kraton is badass, nice jumps!

[@lridebashitrc9422]

Thanks for watching and the comments. Yeah Tundras are pretty sweet. Bash on 😎😎

[@rceranreuven8261]

Nice 💪💪

[@rerun301988]

are thoserrubber bands?

[@lridebashitrc9422]

No the front tires were wrapped with braided Kevlar fishing line. Little experiment on my part you only need them if you are looking for more speed for general bashing kinda pointless. Bash on😎😎

[@hunterjames5819]

Hi what hearing are you running and how are the temps also what Lipo

[@lridebashitrc9422]

hunter james Thanks for watching and the kind comments. Yeah I don’t have a V3 Kraton anymore but that power plant is now in my kzbin.info/aero/PLCdpTqEogbdyJzfEO1_q29EOKd6eTD7bj But the configuration hasn’t changed thou. I’m running only on 6s and on a 20tooth pinion. Temps are descent depends on the terrain.

[@Bro_wdf_you_doing]

What's the difference in performance versus the stock blx motor???

[@lridebashitrc9422]

Thanks for watching and the comments. Much appreciated 🙏. It’s a pretty drastic change from the stock blx system. A big power difference between the two. After the upgrades to my Kraton and the added weight. This gave it a huge power boost. It screams and to date is the rig that has jumped they furthest out of all my RCs. Good luck stay safe and bash on 😎😎

[@Bro_wdf_you_doing]

@@lridebashitrc9422 thanks for the reply bro... I enjoy all your content new sub here I'm new to the rc scene I have a kraton 6s v4 and notorious 6s v4 sub back... I've hit thermal a few times running the 14t pinion and just put a castle fan and still hit thermal... Thinking about getting this set up man... Huge differece in power huh 🤔 🧐

[@lridebashitrc9422]

I appreciate that I will check out the channel.

[@bwoodard907]

I just got same set up but read the motor manual and for the 1650kv it says 3-6s but the combo comes with an 8s esc? Can this set up for sure be ran on 8s? Thanks

[@lridebashitrc9422]

Thanks for watching and the kind comments. Great question I’ve never run mine on 8s it’s so fast with that system. I do know people that have thou although they have some crazy fans on the motor to keep the temps down.

[@travisscudder12]

Why do you have the wires coming up vertical rather than side like arrma instructions

[@lridebashitrc9422]

Thanks for watching and the question. If you have that Hobbywing combo you’d understand the lead wires from the motor are not very long. Bash on 😎😎

[@travisscudder12]

@@lridebashitrc9422 I'm about to install, and that's why I'm asking

[@lridebashitrc9422]

It has loads of power and it’s in my Mojave hybrid now. You will not be disappointed.

[@voltsynub7322]

Would this be faster than the job cheetah.I really want to make it faster but can't find the correct motor and ESC combo

[@lridebashitrc9422]

voltsy nub Thanks for watching and the kind comments. I’m not familiar with the job cheetah, but no doubt this is one fast rig. For me it was well worth the money. Bash on 😎😎

[@voltsynub7322]

@@lridebashitrc9422 thanks👍🤙

[@raptorider83]

sweet vids man. What are your thoughts on the XR8+ sensored esc 1900 KV combo going into kraton v4? I'm curious if there's enough Room it's longer and with the placement of the servo it might not fit. or Max8 and leopard 1730?

[@lridebashitrc9422]

Thanks for watching and the kind comments. Much appreciated 🙏. Yeah for my money the Max6 for a upgrade ESC just makes sense. Both of the motor you are suggesting would get the job done I guess it just depends really on what upgrades you have planned for the Kraton the more weight you add the lower KV would be a better option to keep heat down. If you aren’t adding much weight I think the stock blx system does a get job and is so affordable to replace. Great question. Bash on 😎😎

[@raptorider83]

i want to build my v4 kraton similar to yours with the exception of a few things. so for my power plant ive been looking nonstop for about a week now @ different motor & esc combos. i was thinking of going with the max 8 set up with 1730kv 4092 hobbywing or leopard setup or the hobbywing Xerun Xr8 w/4268sd 1900kv sensored motor. my plan for this build is an m2c goliath chassis thank you 4 tha advice btw, m2c front/rear chassis braces, voltage hobby servo mount, RPM front/rear arms, skip plate, front bumper, wing mount, rear mud guards. ill be installing a heavier duty servo, dusty motors cover "wondering if it will fit with the m2c chassis" along with some other little things from m2c, voltage hobby and just bash it rc. which is inspired by yours , rcdude81 & Kevin tolbart videos. what are your thoughts about the sensored setup? is that gunna be enough torque and speed in such a build? will the temps be ok if i run the stock spur & pinion setup Occasion switching to the high speed pinion? Or do i need to get the max8 setup? i will be running both 4 & 6s max amps batteries cuz there main store is about 10min from my house and i have multiple pairs as i run them in all my rc's, sry enough babbling. please give me your opinion and advice for my kraton build ... thank you for taking the time to respond back. EAT, SLEEP, BASH, REPEAT!!!! Your Fan, Nick...

[@lridebashitrc9422]

Thanks for the kind comments much appreciated 🙏. If I was picking I would go max8 with the 4092 that is a proven power plant for the V4. I don’t switch pinions and only run a high speed pinion on 6s. Sounds like an amazing build and will be epic fast either way. Bash on 😎😎

[@raptorider83]

@@lridebashitrc9422 as i build ill send photos. thanks for responding back.

[@lridebashitrc9422]

Please do you can always send them over Facebook as well.

[@rusr9327]

Can i change out my V5 differentials for EXB differentials? Is that a smart thing to do while rinning this HW- 1650kv combo ??

[@tinywhoop7432]

hi, tell me how the differentials feel after the new motor and 20t pin?

[@lridebashitrc9422]

They felt sloppy and you really need to thicken at least the center diff. Do that and 👍👍.

[@tinywhoop7432]

@@lridebashitrc9422 ok,but how to do it?

[@lridebashitrc9422]

I’m confused on what you are asking. I am talking about removing the diffs and thickening the fluid to help control the additional power.

[@tinywhoop7432]

@@lridebashitrc9422 I asked about the wear of the front and rear differential with such a powerful engine, I am from Russia and do not know English well, maybe that's why we misunderstood each other😂

[@lridebashitrc9422]

I ended up shimming the diffs kzbin.info/www/bejne/n2S9lX18q7SLnsk. If you do that and run 100k in the front, 500k center, and 20 or 50k in the rear it will handle the power just fine.

[@demetriustauriac374]

What do you think about running the max 6 with a 2200kv castle motor?

[@lridebashitrc9422]

Thanks for watching and the kind comments. I’ve not run the 2200kv castle motor so I couldn’t tell you. I would be afraid with the added weight to my rigs that I would have temp problems with that high of a kv motor. I know several people are running them, good luck and bash on 😎😎

[@derekquinones8614]

I’m still deciding what esc to pair with my hobbystar 1480kv can for my exb kraton coming have you had good luck with this max 6 ?

[@lridebashitrc9422]

Derek Quinones I’ve had great luck with the Max6 it’s been great only issue I’ve had is the ESC fan keeps breaking blades so annoying

[@derekquinones8614]

Lride Bash It RC have you tried putting some thick cushion double sided tape or anything to absorb a little bit of shock? And I’m just going to go with the max6 I suppose and start switching my connectors to ec5 thanks for reply happy bashing!!

[@markjwoodford1931]

Would that motor be ok to run with the standard chassis?

[@lridebashitrc9422]

Yeah you could it would fit no problem. My only concern would be the added weight and power would probably twist the chassis much easier than the stock. With that combination in it I have to be careful it’s probably a 40% power increase. 🙏 for watching it is much appreciated. Bash on brother😎😎

[@markjwoodford1931]

@@lridebashitrc9422 Let the twisting begin 🤣

[@liulangmy]

👍👍👍👍 nice upgrade whats the line tide infront of the wheel？

[@lridebashitrc9422]

Thanks for watching it is much appreciated 🙏. The tires have Power Pro Spectra Fiber Braided Fishing Line, Moss Green, 300YD/50LB www.amazon.com/dp/B003CUM7GU/ref=cm_sw_r_cp_tai_YyGYDbC9T69VX. I did four tires and it took forever and not sure it’s worth it, but still running them. Bash on 😎😎

[@dubstepismtlife]

Do thos motor leads directly plug into the esc. Mine won't go in.

[@lridebashitrc9422]

AZ RC Thanks for watching and the comments. Yes the motor leads aren’t crazy long, but they reach the ESC fine in mine. They are right.

[@dubstepismtlife]

@@lridebashitrc9422 I actually had to clamp on them a tad bid with a rag and needle nose pliers to make them fit. They wouldn't go in for the life of me. Now they are very snug but not impossible to remove.

[@lridebashitrc9422]

AZ RC Yeah I have done the same thing before. Just helped a bud install a MMX system and the bullet connectors on that were crazy tight as well. Bash on brother 😎😎

[@dubstepismtlife]

@@lridebashitrc9422 interesting, on a 16 tooth pion and 3.8 trenchers its getting the motor pretty hot. The ambiant temp is like 85 here. Any clues?

[@lridebashitrc9422]

I did add a yeah reaching fan to mine otherwise maybe your bearings.

[@dannywalker6279]

Nice video. Does the esc come with the programming box or do I have to get that separate

[@lridebashitrc9422]

Thanks for watching and the comments. No you need to order the programmer.

[@jwmachon1]

What punch setting do u use mate

[@lridebashitrc9422]

Thanks for watching and the comments. Maximum punch always and I go through it in the video.

[@madrc9781]

it was hard to put those motor wires on esc idk it was so hard needed use a lot hand power to get em in there

[@lridebashitrc9422]

Yeah they can be hard to get in, but I’ve never had one come out either. I have wrapped them in a piece of rubber and using needle nose to get them on and that worked out well. Thanks for the comments bash on😎😎

[@madrc9781]

@@lridebashitrc9422 yea and the soldering too when the thing doesnt want to stick whit the wires 😂

[@planger07]

Great video and what an absolute beast of a rig. Planning a few upgrades for my V4 after seeing this. How does it affect run times on 6s compared to the stock BLX system?

[@lridebashitrc9422]

Thank for watching and the comments. 🙏 Much appreciated. The run times are very comparable depending on driving style I actually think I get more time out of this config, it is so powerful I typically never full throttle the rig. Bash on😎😎

[@planger07]

@@lridebashitrc9422 Thanks bro. Just what I was hoping to hear. Looking forward to some extra power. Keep up the great work 👍👍

[@wilsontyler6565]

That's a 6s lipo right?

[@lridebashitrc9422]

Oh yeah 6s only

[@bigboytoyzrc9258]

Is this 6 or 8s?

[@lridebashitrc9422]

Thanks for watching and the comments. I’ve only run it on 6s and it was plenty of power for me. Bash on 😎😎

[@rudyruelas9219]

Did you need a motor mount

[@lridebashitrc9422]

No with the V3 mounts it was a little lower so I actually made some shims to go under the mount so I could fit that big can. It’s all in the vid. Thanks for watching and bash on 😎😎

[@stefandwoodham]

Does that motor bolt up to the stock slide mount?!

[@lridebashitrc9422]

Thanks for watching and the comments. Much appreciated 🙏. This is on a V3 Kraton with the Hot Racing Motor Mount and I had to add two 1mm shims cut from sheet aluminum. I have not tried it on the V4 motor mount, but I do believe it will fit the V4 motor mount has some additional height to it. It’s a beast and I love that rig with this combination it is a definite go to. Good luck and bash on 😎😎

[@HighVoltageRC3080]

@@lridebashitrc9422 V4 mount it fits 100% with no mods..

[@lridebashitrc9422]

David Awesome I figured it would. It’s a killer combo. Bash on😎😎

[@stefandwoodham]

@@lridebashitrc9422thanks for the reply.. I got that 4985 combo but can't get the gearing right, only thing I would worry about is the motor slapping the chassis on hard landings

[@lridebashitrc9422]

stefan w Yeah I am running a 20t pinion and it is screaming fast with that. I also put 500k in the center diff and that helped. You are spot on with the worry about the motor hitting the chassis I ended up using a large zip tie to fill the little space I had and that has worked perfectly.

[@barxkyRC]

where did u buy the ramps? what brand? thank u

[@lridebashitrc9422]

Thanks for watching and the questions. Much appreciated 🙏🙏. The ramps are discount ramps, however they don’t make them anymore unfortunately. Occasionally you can see them for sale on Facebook or Craigslist, but they have a nice curve to them and work great. Tbone makes basher ramps now. Bash on 😎😎

[@barxkyRC]

@@lridebashitrc9422 thank u

[@joshdunbar9721]

Isn't the 1650kv motor only rated for 6s?. I know the max6 can run 8s but I dont think on the motor

[@lridebashitrc9422]

Josh Dunbar Thanks for watching and the comments. Much appreciated. I wasn’t looking to run it on 8s in my opinion the 6s diffs can’t handle it. That said I haven’t tested the EXB diffs. This combo has insane power it has moved onto another build now, but crazy power. Bash on 😎😎

[@harisbennington4058]

Sorry why did you need to shim the diff holders ?

[@lridebashitrc9422]

Haris Bennington when you power the rigs over stock I started blowing diffs. This allowed the diffs to hold the power better.

[@harisbennington4058]

Lride Bash It RC oh ok because I shimmed my front and rear diffs but I will do the centre aswellv

[@bennett7995]

Hi I have this set up in my limitless is it definitely good for 8s?

[@lridebashitrc9422]

Bennett 799 Thanks for watching and the question. Yeah to be honest this rig is so fast on 6s with a 20tooth pinion I've never even considered running on 8s. That said I know a couple on the armma forum who do.

[@bennett7995]

Lride Bash It RC not a problem and thanks for getting back to me. I’ve been maxing out at 102mph in my limitless running this combo on 6s if I can go to 8s god knows what it’ll do 🤣 a few people have told me it’s 8s capable

[@lridebashitrc9422]

Well 102 is no joke thats some crazy speed. But yeah 8s would be sick.

[@bennett7995]

Lride Bash It RC I have 2 4s 70c batteries on the way so I’ll soon find out what 8s is like haha. Also have the kraton 8s esc and motor on the way for my kraton 6s. It should be a beast on 8s the kraton

[@lridebashitrc9422]

Bennett 799 Oh yeah the Kraton 8s system is perfect in the 1/8 scale Kraton. I am running it in my V4 kzbin.info/www/bejne/fZTbeWilpdyWY8k

[@morenoclint]

What lvc setting, do you use?

[@lridebashitrc9422]

Hi thanks for watching and the question. The settings are in the video at 2:00 minutes. It is set to auto intermediate or value 3.

[@Shad0w86]

Love the jumps bro. New sub...... also listened out for your throttle responses when back flipping helped me out heaps👊👊. I put a etronix photon 2.1 2950kv in my bronto and it back flips on the spot. But wana upgrade from 3s to 6s will I need a 120a ESC?

[@lridebashitrc9422]

Thanks for watching and the kind comments much appreciated 🙏🙏. The V3 Kraton with the Max6 and 1650kv is a beast scary speed.

[@Shad0w86]

Any tips on the ESC bro?

[@lridebashitrc9422]

Mark May The fans are weak and to make things easy I bought the programming card. Outside of that it’s pretty straight with the Max6.

[@blakeflakes1]

What did you do to smoke your blx esc?

[@lridebashitrc9422]

I hooked up a 1950 KV sensorless motor and ran it on 6s and it smoked it.

[@blakeflakes1]

@@lridebashitrc9422 Haha! Sounds like fun! I hear the stock motor has plenty of grunt, the blx esc is the weak link... Just saying because I plan on getting a kraton very soon. May go with the max6 combo as well

[@lridebashitrc9422]

Yeah I ran the stock motor with the high speed pinion to long and the stator fell apart. But yeah the stock motor does a great job. I love the combo. Bash on 😎😎

[@harisbennington4058]

Is it worth it over stock system ?

[@lridebashitrc9422]

It depends on what you want. The stock system is good until you start adding weight and jumping crazy high. Bash on😎😎

[@harisbennington4058]

Lride Bash It RC thanks 👍👍

[@gaviscon4304]

Hey just a question if u don't mind does the max 6 bolt in with out any changes, could you let me know please asap as wanted to do this, great vids keep up the good work cheers gaz 👌👍😉

[@lridebashitrc9422]

Thanks for watching and the kind comments much appreciated 🙏. The max6 with just a few modifications. I took a stock ARRMA esc plate dremeled off the motor wire post and then took a template off of the max6 and drilled holes in the esc plate and screwed the max6 to the plate and installed it without issue. You will need to find the right position on the plate as the motor wires aren’t crazy long. I love the combo and the rig is wicked fast. Bash on 😎😎

[@gaviscon4304]

@@lridebashitrc9422 thanks for the info will get going with it tomorrow when the max 6 turns up, what size pinion would you suggest as don't want it to get to hot as had max 8 and always shutting down, cheers gaz

[@gaviscon4304]

@@lridebashitrc9422 hi spoke to you about putting max6 combo in my kraton 6s and have done so a animal now, just want to know what diff oil weights u use as getting a lot of wheelies and what pinion size u use as I used a 22t and way to fast, would help me out if u could reply thanks again gaz 👍

[@lridebashitrc9422]

Gav Iscon Check out this video at 9:11 into it. ARRMA OUTCAST gets lost 👓 and two KRATONs air it out!! 😎😎kzbin.info/www/bejne/b53Wo4V5rJyrbJI.

[@gaviscon4304]

@@lridebashitrc9422 thanks just subbed,

[@FLSharkdiver]

Awesome upgrade mate! All in All how do you compare it to the stock BLX Motor and ESC ?

[@lridebashitrc9422]

Thanks for watching and the comments. No comparison makes crazzzy power and it is a bit heavier, but wow double the power of the stock blx. Makes the longer wheel base rigs perfect. Bash on 😎😎

[@mark-1rc502]

Very nice mate👍 Food for thought there bro!! Looks mighty powerful man 🚀🚀 How many S Lipo are you running ?

[@lridebashitrc9422]

Thanks for watching it’s much appreciated 🙏 . Always on 6s. 🚀🚀. Bash on. 😎😎

[@mark-1rc502]

Lride Bash It RC Nice 🧐 I like that , I just googled the price in UK that Combo is about £215 gpb. That’s about $280 usd . It’ll have to Stay nice for now .

[@otablott7779]

Nice build but it doesnt seem to have much acceleration compared to a Leopard 4082

[@lridebashitrc9422]

Thanks for watching and the comments. I can’t speak to the leopard motor. But this 1650kv has scary power for what I use it for in most of the video I am barely touching the throttle. I have jumped it twice at full throttle and the Kraton made it 95feet off my small little ramps. Bash on 😎😎

[@otablott7779]

@@lridebashitrc9422 Thats enough for me then, I was deciding between this and another Leopard 4092. This is a beast of a motor from the looks of it. Thanks for the reply

[@harisbennington4058]

Do you have to add ships

[@lridebashitrc9422]

Yes I would recommend it especially for the older versions.

[@joseCalderon1976]

What kind of speeds are you getting on that monster? Thanks.

[@lridebashitrc9422]

Yeah it’s a monster alright. I haven’t put a gps on it, but just from running it my prediction is over 75. Stock electronics with the high speed pinion is 60 and no question it’s faster than that. Thanks for watching. Bash on😎😎

[@joseCalderon1976]

@@lridebashitrc9422 Awesome. Can I use the stock spur gear and 18t pinion for bashing? Thanks! What do you use for bashing?

[@lridebashitrc9422]

With that 1650kv I geared up to a 20 tooth Tekno pinion. You can try the 18 and see if you like it. In my opinion the 20 is perfect 👌.

[@joseCalderon1976]

@@lridebashitrc9422Nice. Did you use the stock arrma stock spur gear? Thanks.

[@lridebashitrc9422]

Yup stock spur

[@ShadeTree_RC]

lol nice bash bro ....ya ever run it on 8s with that setup ? ...if so how did it hold up

[@lridebashitrc9422]

Thanks for watching and the kind comments. Nope the rig is crazy enough on 6s. Bash on 😎😎

[@tobydyes]

Should have bought a Max 5 200amps extra 40 amps Max 6 160 amp running it on 6s system is maxed out make sure you add the power cap

[@lridebashitrc9422]

Thanks for watching and the comments. Wow Max5 not the diffs would take that, maybe the EXB diffs thou and the Max6 was tight enough to fit. Bash on 😎😎

[@natashaali1682]

I thought max 6 was 8s capable

[@gonzodetroitify]

5.30 💎✔️

[@sniperowlG]

Like and sub just from the intro music.

[@lridebashitrc9422]

Thanks for watching and the sub much appreciated. Bash on 😎😎

[@bljrpaham]

What gearing do you use?

[@lridebashitrc9422]

Thanks for watching and the question. I’m running a 20tooth pinion and that’s crazy power. Bash on 😎😎