Thankyou brother this will without a doubt come in very handy for me at some point. If you don’t upload things of this nature then us numpties wouldn’t have a clue. Well perhaps not that bad but it gives me confidence x
@TedBackus5 жыл бұрын
*thank you. this applies for the Typhon 3S for anyone who is curious*
@tjcben14 жыл бұрын
Genius design in simplicity. Makes it a lot more reliable.
@danielnavarro85695 жыл бұрын
Awesome video,very well explained! I would never imagine it would be sooo easy! Kudos to Arrma! Please do a video on how to take out the diffs! It would be very much appreciated! Thanks!
@BillsRCHobbyShop5 жыл бұрын
Thanks for watching and I’ll try and get one made of the diffs ASAP.
Now this video is helpful!!! watched another video of a dude removing parts and then skipping the whole process lol
@mojojoji54932 жыл бұрын
@Bill Pettus do you know what you’re talking about? Read my comment again
@mojojoji54932 жыл бұрын
@Bill Pettus I swear people just wanna argue on the internet
@xxg0t3mxx4 жыл бұрын
looked at this vid before i just went and purchased a spur gear from his shop! very informative, and an amazing addition to our town with the track. their staff and bill is very helpful your ever around town check him out!
@nicolehenry97024 жыл бұрын
xxxg0t3mxxx what spur gear are you using??
@xxg0t3mxx4 жыл бұрын
@@nicolehenry9702 using stock but just picked up a pack of pinion from 22 to 26 t and a 25 on the original works perfect super fast.
@xxg0t3mxx4 жыл бұрын
@@nicolehenry9702 also. Under spur gear is a little indention if you cut that out exposing spur gear it will not eat through them like I had troubles with.
@danielrusso65922 жыл бұрын
You skipped the only part people need help with. Getting the pinion off!!?
@miltbuiltrcMBRC3 жыл бұрын
Thank you very informative like everyone else said you got a sub
@Jamesmoore-mj5ke3 жыл бұрын
Were do I get a 15 t pinion for the 3s senton
@leonardwheeler47894 жыл бұрын
Great video, super details and great explanation for me as I’m new to this arc hobby ? Keep up the good work. Your advice please, Arrma Senton stock 20T ? Which is the best way to go in your opinion 15T or 17T ! Keep up the good work, Regards, LEN
@mugshock12344 жыл бұрын
I have the Senton 3s blx and the 17T is the way to go...The stock 20T is just too much and the 15T is too little. That's my experience......I don't know why Arrma went with a 20T. Also if you can't find a 17T then i would go with 15T.
@mksteezy4 жыл бұрын
@@mugshock1234 Where did you purchase your 17T pinion gear?
@mugshock12344 жыл бұрын
@@mksteezy Just Google 17T Pinion 0.8 Mod and you'll find one. It's got to be the 0.8 Mod if you're installing on your Senton.
@bunchareel52773 жыл бұрын
@@mugshock1234 if I put belted tires on it will it make it the same speed it was or faster
@CONFUCIUS-f2x4 жыл бұрын
Very helpful.
@bernardbrowne52053 жыл бұрын
Nice video you nail that one, the way you explain it. The two screws that around the pinion ever came lose .?
@bricethompson34594 жыл бұрын
Hello, I have the arrma Denton 4x4 ( the one below this on ) and I have several options for a pinon gear should I upgrade to brushless or would the 27t be a good upgrade I have the 15t in it right now ?
@joeyfesta20424 жыл бұрын
😳 Omg unfortunately I did not see this video until today.As of yesterday I spent $100 paying my local Hobby Shop to change my spur gear and pinion.
@b8nducciify3 жыл бұрын
Time to find another LHS! That’s insane
@Tylenol8882 жыл бұрын
What is that motor mount? I like those pinion guide do you think i can have that with arrma granite blx?
@socalBB2 жыл бұрын
It’s been a while since you posted this video but I was wonder where did you get your 20tooth pinion gear
@joeyfesta20424 жыл бұрын
I have a problem.my local hobby shop ordered and installed a steel spur gear to my existing pinion gear.The Spur barely touches the pinion.10% contact.Starting to strip.What to do ???
@Wingman-ls4bs3 жыл бұрын
I just installed a 26 tooth pinion gear and it won’t fit. It’s too tight?
@conwaywebb86862 жыл бұрын
I have a armor sentence with the tracks's volinium VXL system with A192 pinion and a 5017th spurgear and I put a set of 2.8 tires rims on the core now I'm overheating like crazy any help would be nice
@kolten8085 жыл бұрын
Awesome thankyou for the video, upgrading my granite mega 4x4 to 3s looks almost identical🤔 Subbed 🤙🏽
@travisfuller71384 жыл бұрын
Does 3s parts fit the mega?
@Jursaw4 жыл бұрын
travis fuller yes
@bigwillrc85095 жыл бұрын
Great video brother, arrma rocks!!! I subbed u👍
@mjsmjs35784 жыл бұрын
Nice vid! How tight should the motor shaft be to turn with your fingers, mines quite tight and it’s puzzling me? Thanks
@fg1jm Жыл бұрын
when horizon said they were easy to work on i didn’t know this was what they meant 😂😂
@Evan-rq2ee2 жыл бұрын
Hey, just wondering, do I gotta grease the pinion back up? I forgot to and it’s making a screeching noise now 😂
@davidcarroll20354 жыл бұрын
More how toos please
@rtrrc45945 жыл бұрын
Vey nice how to video step by step i noticed you have a 20t pinion in this senton 3s blx video could you please show us quick run with it to see how much faster it is and handling i might put a 20t in mine also, and i will watch this video when i do. just need to get motivated im subcribed thanks 👍🏽👍🏽
@BillsRCHobbyShop5 жыл бұрын
thats stock pinion. it should hit almost 60mph with 3s lipo
@rtrrc45945 жыл бұрын
@@BillsRCHobbyShop oh ok my bad cool 👍🏽
@johnporter16133 жыл бұрын
What pictch is the pinion and how many teeth on spur gear thanks
@jpslayer20165 жыл бұрын
Easy as 123. I subbed to your awesome channel. 👍
@justiceonly91055 жыл бұрын
Hi, Grateful to you. I have the Arrma senton 4x4 that I converted to "Brushless", how do I know which steel Spur and pinion that would fit inside the case? Thank you
@samuelyi91894 жыл бұрын
did you ever find out?
@luftwaffle67014 жыл бұрын
I took out the rear diff cover first, can I still take the motor out?
@randomstuffno1caresabout34 жыл бұрын
Does the senton use metric hardware?
@luftwaffle67014 жыл бұрын
Henry Horton yes
@ramsay48044 жыл бұрын
Thank you 👊🏻👍🏻
@stepbackjack41942 жыл бұрын
Something seems to be missing like the actual change!
@BananaDucshortz5 жыл бұрын
Nice, man. Subbed.
@imserious21874 жыл бұрын
I put the 26t in mine, now it'll run for about 5 minutes before driving as if the battery is dying, and the esc has a flashing red light. What's that??
@sdericmonty4 жыл бұрын
It’s probably over heating dude! The 26 is probably way too high of gearing.
@Mrjazzzery3 жыл бұрын
I got the grub screw out but how do I get the gear out the 20 tooth
@Mrjazzzery3 жыл бұрын
Nvm there’s a c shaped pressure washer thing holding the gear on after the grub is removed. My motor is shit I haven’t had it a year and the arrma senton took a shit already I opened it up and bbs went everywhere I was wondering why my rig wasn’t moving at all the bbs were jammed all in the trans and the brushless
@UTP_ENT3 жыл бұрын
Can’t get the red block to come out or even budge
@imserious21874 жыл бұрын
Screw on my pinion gear stripped, how can I get it off now??
@22Phanatic4 жыл бұрын
imserious2187 late but try drilling it out carefully
@blakesanfilippo35913 жыл бұрын
what does changing to a 26 do?
@BillsRCHobbyShop3 жыл бұрын
Adds top speed
@vibe8084 жыл бұрын
Dose it run hot?
@ELValenin5 жыл бұрын
Are there any problems with the gears at 3s?? Because some of them are plastic?
@BillsRCHobbyShop5 жыл бұрын
only a few have had problems with the spur gears
@ELValenin5 жыл бұрын
@@BillsRCHobbyShop are there steel gears aviable?
@BillsRCHobbyShop5 жыл бұрын
@@ELValenin not yet
@ELValenin5 жыл бұрын
@@BillsRCHobbyShop uhhh, think I'm gonna have to buy the 6s blx
@BillsRCHobbyShop5 жыл бұрын
@@ELValenin i have some instock
@flibbertigibbet62004 жыл бұрын
Can't get the standard pinion off, I have taken the grub out but looks like it is being held on by the thread lock somehow? Any tips?
@redblue40rc334 жыл бұрын
Flibbertigibbet acetone will loosen loctite
@Vortex-jk3me4 жыл бұрын
My heatsink is loose from the motor it’s jiggling around and I tried to fix it but it’s still loose PLEASE HELP MEEEEEEEEE!!!!
@vvvv-lu8zi3 жыл бұрын
Thats probably easy on a brand new model....when they hit dirt and stuff ..this is not so easy to remove these plastic parts
@newamericatowguy36334 жыл бұрын
What's the pitch?
@connarmarsh90604 жыл бұрын
I wanna know to
@Jursaw4 жыл бұрын
0.8 mod
@MrMaximuskodrata2 жыл бұрын
@@Jursaw 0.8 mod same as 32dp
@redblue40rc334 жыл бұрын
One of my hex head bolts broke off and threaded stud still on motor case...too much blue loctite from factory
@redblue40rc334 жыл бұрын
Vise grip pliers got it....stupid Arrma put too much blue loctite
@Jwick15184 жыл бұрын
skipped a huge step bro....
@bikesrc46423 жыл бұрын
Nice demo bro " gave you a sub . I have a RC channel too would appreciate you stopping by my channel. All the best bro
@kevinabbott29794 жыл бұрын
You're wrong lol. The bottom motor screw is slotted to move from side to side to allow for pinions in between those sizes. You do not only have three sizes of pinions to choose from.
@BillsRCHobbyShop4 жыл бұрын
Kevin Abbott with this car and this set up that they have in it. It will only take three different size pinion. They do this so u can not strip your spur gear and this cars are meant for bashing and they don’t want the motor to move.
@BillsRCHobbyShop4 жыл бұрын
Did u find out I'm not Wrong ?
@BillsRCHobbyShop4 жыл бұрын
Please do your research and why the negativity?
@jpak11305 жыл бұрын
My senton was not that easy. I had to really pry and woggle those parts off.
@BillsRCHobbyShop5 жыл бұрын
Jeffrey Pak sry u had that problem. Hope u got everything figured out and hope u learned a trick or two. Bash first apologize later
@jpak11305 жыл бұрын
@@BillsRCHobbyShop once I removed them the first time it got easier to remove. Now its Easy. Arrma 3S platform is legit!
@RyanRKJ4 жыл бұрын
Same here. It was definitely tough to get them out when I tried for the first time tonight. But, this video assured me I was doing it right. I just had to pry ‘em loose. I was pulling my transmission because the gear in the gear cover had siezed up. Fortunately I was able to loosen it up to save it.