Arrma Typhon 3s Tire Test

Arrma Typhon 3s BLX Ver.3
{ Width measured from outside to outside of tires }
Stock width is 12.5” or 306mm
Proline Trenchers width is approximately 15.75” or 401mm
Arrma DBOOTs width is approximately 11.75” or 298mm
{ Height of tires }
Stock tires are 4.5” or 114.3 mm in height
Proline Trenchers 4.9” or 124.5 mm in height
Arrma DBOOTs are 3.98” or 101mm in height
HOONS and GPS are from Hobby Town
www.hobbytown.com
Trenchers tires and wheel adaptors are from Proline Racing
www.prolinerac...
Speed achieved on my first run
Proline Trenchers was 48mph (77.2kph)
Hoons were 38mph (61.2kph)
I’m sure I could have probably achieved a better speed if I had more open space but my driving skill are just not that good yet and hitting curbs is probably not the best for the Typhon. 

[@bullitmaget8193]

got myself the kraton 6s...majorly upgraded now...got my brother inlaw a notoriuos 6s and got my brother a typhoon 6s we all love them

[@RCRoads]

Wow you really went all out. I thought I was your brother too. ha ha That's excellent to have friends and family involved in the hobby. Excellent!

[@MyRClive]

Hey Hey my Dude ! nice to see another Californian ! cheers ...

[@rcarty419]

Awsome video I’ve been shopping around how you feel About what you’re running on for surfaces? Like my stock tires but can’t help but think off-road the bigger ones may help…gotta be harder in drivetrain though.

[@RCRoads]

I would imagine that the engineers at Arrma selected the tires they did for a reason. I actually think they are best for asphalt surfaces and work good offroad as well. I mostly drive offroad and just like getting better traction so I go with a tire like the ProLine Trenchers. I recently picked up some Proline Badlands and like them even more. Both have the same wheel height as stock. I have had no issues with the drivetrain. The 3s Granite is basically the same platform but with a shorter wheel base and the stock tires are the same as the Prolines mentioned. Thanks for watching and hopefully my comments were helpful.

[@rufusyoungblood9274]

💭🤔 Change the hubs over to 6s Kraton and the wheels will fit just fine

[@RCRoads]

Thanks for checking out the video and the valuable information. I had no idea that parts from a 6s Arrma would fit on a 3s platform.

[@arq.andresfelipemoralesvar9593]

Cool tires man! I have a Granite and I’ve been waiting for my new diff to arrive so I can use my trenchers on it. Have you found any weaknesses on your drivetrain while using your trenchers? Btw the smaller tires look very nice for handling on asphalt. Liked the vid and subscribed 😊

[@RCRoads]

Thanks for the sub. So far I have not had any drivetrain issues running these tires on my Granite or Typhon. I just bash around in the dirt mainly and find that the Trenchers and Badlands work real well. I would for sure dress up the Typhon for the street with the Hoons and gear up but I just don't feel comfortable on the street. Curbs kill... Thanks again for watching and the nice comment.

[@arq.andresfelipemoralesvar9593]

@@RCRoads thank you for the answer! I just googled the badlands and I think I want them!!! lol the look is also pretty sick!. Maybe later though. I’ve seen many of your vids and content is pretty entertaining:D

[@RCRoads]

Awh ... Thanks man. This was an old video and I really didn't have much experience with tires or RC's for that matter. Obviously going with oversized tires would put more strain on the diffs and suspension but I have had no issues at all running wider tires on the Typhon. Actually the Typhon and Granite 3s share the same drive train and the stock granite tires are the same size as the 3.8 Trenchers or Badlands from Proline. @@arq.andresfelipemoralesvar9593

[@rvrcaction7287]

Did you use a fresh battery for the run on each set of tires? And did you get a max speed with stock tires?

[@RCRoads]

I used fairly new batteries that were fully charged. I have not done a speed test on the stock tires. I'll try to do another more accurate speed test in the future. The more I get into the hobby the more I understand how important it is to include details especially on speed runs.

[@mirkotram5306]

Is the car still running?

[@RCRoads]

It runs great. I really don't take it out that much but it's a great back flipper and has great acceleration. I'm waiting for something to break but so far the only thing I have broke is the front shock tower at a skate park.

[@NewLifeeight]

Eventually you'll need metal differentials for it. Buffalo they are awesome and are tough enough to handle extra power and gearing. Happy bashing (but) spelling apology

[@RCRoads]

Thanks for watching. I'm not sure why this video gets so many views. I was just starting out with RC's when I made this video. I have been real lucky with my Typhon. I've broken a shock tower at the skate park. Broken drive shafts, shocks popping out and I sheared off an outdrive bashing bit the gears are still good. I've been real happy with the 3s Typhon and really have my eye on a 6s V5. So many great RC's out right now so it's hard to decide. I will look into the Buffalo metal diffs. Thanks for the heads up.

[@ThetaxDeltax]

you fill the tires with air? How? Or leave it like that?

[@phillybrc]

Cool vid. My trenchers don t touch at all, strange. I really like them. Also, The fans usually run all the time…

[@RCRoads]

I'm not sure why this video got so much traction. I was just starting our and really didn't know much about RC's at the time. Actually I still don't compared to most. One thing for sure is that I do like Proline products and also put the same tires on my Granite. They have been holding up well and I have a good collection of hex adaptors with different offsets both in 17 mm and 12 mm. It's amazing how fast I can receive an order from them. It's like the next day or within 2 days. Their factory is in Banning Ca. so it's real close to where I live.

[@phillybrc]

@@RCRoads lol. It s done well none-the-less! These numbers aren t easy to get!

[@RCRoads]

@@phillybrc Thanks man. I guess there is a big interest in Typhons and tires. :) I went back to stock tie rods yesterday and ordered another set and some front arms just because they are so cost effective / Inexpensive. I do like the trenchers for off-road but the stock tires rip on the street.

[@monsterhartz9261]

Should have steering rate on the ratio and trim. Also stop bumping the steering wheel I can hear it on the video

[@RCRoads]

lol .. I hear it too. It's sad when you get old and your 6 year old grand kid drives better than you. I really should set the steering rate and trim. Thanks so much for watching. ❤

[@haydenhewitt1216]

Hey great video, I also have a typhoon 3s. How did you get it wheelie, did you change anything from stock?

[@RCRoads]

It's totally stock running 3s on the BLX 100 system. It's a Version 3 Typhon if that helps. I think I have the punch set on 4. I really don't think it's capable of pulling a willie for a dead stop but if you get it rolling and punch it the front end should come up. Thanks for watching.

[@fehratrahic8614]

Do you have Any adaptors on the tyres or do they fit when you put them on reversed

[@fehratrahic8614]

I just want to understand this you did not use any adaptors.?

[@RCRoads]

@@fehratrahic8614 The inserts that come with the pre glued tires and rims from Proline are what I used. I know it's not proper to install them that way but they lock right in just as they do on the inside. I have both the Trenchers and Badlands and have been running them like this on my Typhon and Granite for a long time now and haven't had any issues at all.

[@hugh5400]

I almost purchased a Typhon but I got such a great deal on the Losi 69 Camaro 22S No Prep Drag Car that I couldnt resist. I do like the Typhon very much and I'm sure I'll talk myself into getting one by spring. Great video ! Thanks

[@RCRoads]

I have been very tempted to pick up a 69 Camaro myself. It's such a good looking car and is dear to my heart as long ago I had a 69 that was my daily driver. The Typhon is by far the best car in my collection for off road fun. It jumps well and lands perfectly most of the time even if you are a bad driver like me. Thanks for watching and commenting. 👍👍

[@mrtambourineman6107]

I got a Typhon 3s recently and find it to be the best handling car out there. Invest in belted tyres though if you buy proline badlands

[@davidrueda1617]

you think these tires are harder on the diff

[@RCRoads]

I'm no expert on the subject. My thoughts are that the larger or heavier a tire is the more negative effect on differentials. That being said .... So far I have not had any problems with my diff gears on either my Typhon or my Granite and they are both running 2.8 ProLine Trenchers. I bash both cars hard and land real badly quite often but no issues at all.

[@RedLionRC]

🤠👍🏼

[@RCRoads]

Thanks for watching. 👍

[@JvD1985]

Was this with stock pinion?

[@RCRoads]

Yes this was just after I bought the Typhon and only testing tires. Thanks for watching. 😊

[@rcarty419]

Speed running is tough. My typhon on tar to open it up have to be very careful!! Gets squirrelly!!!

[@RCRoads]

The same here. Speed runs are not really my cup of tea. Too much damage when you hit curbs. I have experimented with using a gyro but that really doesn't seem to help. I guess a big open area like a airport runway would be best. Slowly ramp up the speed and never try to steer at high speed. If your not tracking straight adjust and try again. It's just too much work for the amount of enjoyment in my opinion. Half the time my GPS malfunctions.

[@randyseaver8319]

You can turn down your steering rate down on the radio control!

[@RCRoads]

Thanks Randy. I'm kind of still learning new things about RC's as I go and often forget. This is great advice. 😀⭐

[@mrtambourineman6107]

My advice is pay the extra amount for the belted pro-lines and you will be rewarded with an all round much better handling car 🚗 😉

[@RCRoads]

Great advice. I never really thought about it from that perspective but yes for sure it would help. Pro-Line offers up some great tires and I will definitely consider some belted ones for my next set. Thanks for the advice.

[@IsaacBryant-g3d]

Wait what type of tires do you have on the car on the start you said trenchers but I can’t find the trenchers with those rims?

[@RCRoads]

Don't laugh. These are trenchers with the rims already mounted and glued from Proline. Ok so... What I did was simply flip the tires backwards and installed the inserts on the opposite side of the rim giving it a wider stance and a deep dish look. It's probably frowned on but I did it on 3 of my cars and have not had any issues. The inserts come in 12mm and 17mm and have all different thicknesses so you can get mor or less offset. I went with the narrow inserts and they lock into the rims the same inside or out. Hopefully I didn't totally confuse you. These are 1/10 Trencher F/R 2.8" MT Tires Mounted 12mm/14mm Black Raid rims. They come pre glued so that's good. They are not the belted trenchers so they do balloon some.

[@MrSrtman18]

@@RCRoadsso i have to order 2 sets (pairs of 2) and what hex adapter? I like this trencher set up you have!

[@RCRoads]

@@MrSrtman18 The tires should come with hex adaptors included. You need to specify if you want 17mm or 12mm depending on what car your putting them on. The hex adaptors are also sold separately and are very reasonably priced. You could pick up some with different offsets depending on your needs. The only thing you need to worry about is the bolt pattern. Some adaptors are 8 hole and some are 6 hole. I believe the Trenchers and Badlands are both a 6 hole pattern. I have a set of badlands and they are almost the same as the trenchers but they have a more aggressive tread for offroad performance. Best wishes to you on your mods.

[@MrSrtman18]

@@RCRoads so i have this same 3s car typhon. What did u get?

[@RCRoads]

@@MrSrtman18 I got the Proline Trenchers 2.85 x 47.87 Part number 1170 with a 6 hole pattern. www.prolineracing.com/product/1-10-trencher-f-r-2.8-mt-tires-mounted-12mm-14mm-black-raid-2/PRO117010.html The tires came with 12 mm hex adaptors and I had to buy the 17 mm adaptors as an extra cost of $8. You can probably order them with 17mm adaptors but if not here is the link to them. www.prolineracing.com/product/1-10-6x30-to-17mm-hex-adapters/PRO633600.html Happy shopping to you my friend

[@brianu33]

Did you upgrade to metal differentials? I keep blowing mine out. I ride easy and still diffs blow out. Vorteks also

[@RCRoads]

I really haven't put that many miles on my Typhon. Thanks for the heads up. I think I have probably ran about 4 full packs of driving with these tires. I really should get it out more.

[@eduardonessim4499]

Hi. Great video comparing these diferent size tyres! ...Please tell me any issues with your front and rear differentials using those big trenchers ? ( Are tbey the 3.8 size ?) Also any heat isues with the esc or motor ? Wich pinion gear are you using with those wheels ? Thanks a lot !

[@RCRoads]

Thanks for watching. I have had no issues at all with either the Proline Trenchers or Badlands. I run them on my Typhon and Granite without worry. They are the 2.8" ... I'm running 3.8" Fling Kings on my Granite and it's still going but I drive it carefully.

[@eduardonessim4499]

@@RCRoads ok. I Bought the 2.8 badlands . Thanks for all your advaice !

[@RCRoads]

Your welcome and have fun with the new tires. I'm sure you'll be happy with them. @@eduardonessim4499

[@chadyarbrough3640]

Great video man, keep doing you bro!

[@RCRoads]

Thanks for watching. I'm not sure why this video got so many views. I guess I should take the Typhon out more often. 😃

[@chadyarbrough3640]

@@RCRoads just keep loving life and doing hobbies and you'll be good brother. Positive is the new you, embrace it.

[@RCRoads]

@@chadyarbrough3640 Thanks for the encouragement. Positive is the new me. x10 👍👍

[@marlonellis1806]

Nice haven’t driven mines yet, im still adding parts and couple adjustments

[@RCRoads]

Thanks for watching. For sure the Typhon is the most fun ever. They can be modified for speed or offroad. Great for jumps too 👍

[@michaelbatey348]

Looks mint

[@RCRoads]

Thanks for watching Michael. It was practically brand new. I only had it our for one or two runs before I made this video.

[@jeffarab4947]

Leave the stocks alone.they are great as is. But which tires u using from now on

[@RCRoads]

Thanks for watching Jeff. The stock tires are probably the best all around tires for the Typhon. They don't look as cool as the Trenchers but I'm sure Arrma engineered the car to run on those tires. I still run with the trenchers but just haven't really taken the Typhon out in a while.

[@jeffarab4947]

@@RCRoads oh ok. Yes they are massive wow amazing great man

[@RCRoads]

@@jeffarab4947 Thanks Jeff. I honestly think the stock tires are fine for all around on and off road but either the PL Trenchers or Badlands tires improve off-road drivability.

[@jmoya780]

Cool video man. Hit some jumps and hit some more speed runs and try pinions and stuff too

[@RCRoads]

Thanks Jacob. I really should set up a ramp on some grass or soft sand and practice. Most of my jumps end up in nose plants.

[@aaroncorbett5637]

Do Another Speed Test WITHOUT The Crashes Please...

[@RCRoads]

I'll do my best. lol

[@mankind8088]

😭😂😂😭😭😂😂😭

[@cat-cambodia1801]

Good video my friend 🤗🥰👍

[@RCRoads]

Thank you sir. I haven't had my Typhon out in a while. I should get it out of mothball. It's by far my best basher.

[@sergio17061987]

Which name of tyre truggy style??

[@RCRoads]

Thanks for watching. I believe this is what your asking for. .... Proline Trenchers width is approximately 15.75” or 401mm. Height is 3.8" 17mm Hex inserts . (1/8 Trencher X F/R 3.8" MT Tires Mounted 17mm Blk Raid ) ( Item No.PRO118410 )

[@devliegendebollander3528]

@@RCRoads 2nd run I also broke my shock tower, my brcc had never had that and it took some massive beatings. Seems a body as cover over the tower helps 🤔. Thinking of making a brace for typhon tower since there isn't much available to upgrade that. I do have a question, Trenchers or Badlands, belted or not belted? What are your thoughts?

[@RCRoads]

@@devliegendebollander3528 I kind of like the Badlands but I have been running Trenchers. Non belted really balloon quite a bit even on 3s cars. I have yet to spin a non belted tire off of a rim but it seems quite common on 4s and above. I think it would be interesting to put a different body on the Typhon. It does have 2 holes for body mounts directly behind the shock tower so that helps. Let me see what you come up with for a body. I might give it a go as well. 👍👍

[@jamesbrooker6391]

Do these fit straight on without changing anything on the typhon

[@RCRoads]

Yes. They are all 17mm hex and fit without any issues. ProLine offers some real nice tires and wheels. I would go with the Trenchers or Badlands for the Typhon for offroad action. Proline pre-mounted tires come with hex inserts for their rims so you can choose the offset and hex size to fit you buggy perfectly.

[@jamesbrooker6391]

@@RCRoads thanks so much for your help and reply

[@jamesbrooker6391]

Would You recommend this over a Hpi buggy flux I can’t decide 🙌

[@RCRoads]

I really don't know that much about the HPI to comment. The Typhon has been around a long time and has tons of after market upgrades. One thing I did notice about the HPI is that it uses dogbones rather than sliders. I have several cars with dogbones and every time I go out bashing or offroad I end up bending them. I hardly ever have issues with slider drive shafts. @@jamesbrooker6391

[@jeremycravens6973]

Less yapping, more driving! Please

[@jeffarab4947]

The best comment here^

[@patrickkelly7789]

Stop watching if you don’t like it bruh. Personally I love that he’s talking a lot because I want to put bigger tires on my typhon and he gave me a lot of information

[@biggnasty989]

"OH BOY", LMAO!

[@RCRoads]

Thanks for watching. 👍👍 *