Dang that is Fast! You are really putting out the content. Great stuff!
@InnovationRCАй бұрын
I appreciate that! Doing the best I can
@J.D.Y.BАй бұрын
That thing is MOVING! 🔥🔥🔥
@GreentyphonАй бұрын
See I knew you was gonna show the assumeness of this rig you never disappoint great stuff
@tonysmith7989Ай бұрын
And SOOO glad the new Typhon has a center diff. May have to sale my previous Typhon to get one. Tired of it sounding like it's whining. 😁 And tired of slippers. I mean I wear slippers but my RCs need to run diff - erent steel toed boots. 🤙
@InnovationRCАй бұрын
Never have to worry about slipper clutch issues ever again with this one!
@JorgeEscamilla-r6sАй бұрын
Good job getting it to 92 mph!
@InnovationRCАй бұрын
Thanks on that!
@ianjohnhorwood2605Ай бұрын
Is that the MIKE TYPHON buggy 🤣🤣🤣 .
@frederickgrassie3383Ай бұрын
Wow! That’s fast for that small size. Excellent 😊
@techspac3Ай бұрын
The only time when "i think its in there" is not frowned upon😁 good run mate👍🏻
@InnovationRCАй бұрын
Absolutely agreed 😂
@RCplamodelАй бұрын
Thank you for sharing a good video with a nice car! 💯👍👍
@jrtate1123Ай бұрын
WOW 🤯 Insane passes 🙌🏽🙌🏽💪🏽💪🏽🫡🫡🔥🔥🔥
@InnovationRCАй бұрын
Thank you! 🙏
@tonysmith7989Ай бұрын
I think these drones swarming around may have taken your hat. Time for a foil one. 🤣
@Remora_RainАй бұрын
"We can fit a 6S in there?!?" omg pls dont i love the Typhon so much and i dont wanna see one turn into a rolling ball of lipo battery fire lmao.
@OmniMan_RacingАй бұрын
That's super impressive
@InnovationRCАй бұрын
Thanks I appreciate that
@rccarsandmusic2641Ай бұрын
The Gold standard!
@peteroman4297Ай бұрын
SWEET!! Now you got me wanting to get one. I got a Mamba 8s ESC laying around so I’ll definitely pick up a 2-3s Typhon and switch out that ESC and stick the 8s Mamba ESC in it. I will do a little grinding to just see if I can fit a slightly bigger pinion gear in it to get closer to that 100mph? Thank you brother for another awesome video.👍👍💯💯💯👌👌🙂
@InnovationRCАй бұрын
It's a solid car to do 100 with! Already did the grinding, can't go any further with the gear that's currently in there. Have to somehow drop the center diff out and run a smaller diff. Except the bearings are larger than a standard 2-3s housing. So it'll be difficult!
@heat305rcАй бұрын
keep pushing those limits bro 🚀🚀💯💯
@InnovationRCАй бұрын
Thank you!
@benniullrich2237Ай бұрын
Super Cool
@therchotspotАй бұрын
I ran 6s on stock motor over 100mph on the v3.
@scaleworksRCАй бұрын
Nice, dude!
@rcmtb1052Ай бұрын
Wow! Thats faster than my felony🤣
@InnovationRCАй бұрын
A stock felony yes, but you have the ability to fly right past that even then so!
@speedrungermanyodwkАй бұрын
Great Bro
@EYESWIDEOPEN00Ай бұрын
223s... 322 backwards. Funny stuff. Good old Skull & Bones number
@Hungrybird474Ай бұрын
Awesome !👏 thanks for doing this . I wouldn’t have been able to not to do the same and prefer the RC s modded OP like 4s combo for 3s , 6s combo for 4s and 6s with max6 combo type stuff . I’m getting my first buggy soon hopefully . I need to try the racing and speed side of RC
@CoachD386Ай бұрын
Yessssir 💪🏾💯
@InnovationRCАй бұрын
Coach! 🙏💪
@Chapman1792Ай бұрын
What pinion and spur gear did you use?
@BuzzBuggiesRCАй бұрын
Cough, cough how you got this already I've had to pre order can't get until December ❤
@russellmosser9107Ай бұрын
Can u show how u got the big pinion gear in it what is the spur gear size as well pls thank u
@paulhogg7659Ай бұрын
How do you wire the motor into the esc bullet connectors that looks like a perfect set up for me thanks
@InnovationRCАй бұрын
A little bit of soldering. Just solder the ends on the stock motor to 6.5mm bullets that go to the esc
@orbitaljellyfish808Ай бұрын
Droop screws, taller foam tires, and ice packs between runs for 100+?
@nickkoepplinger9204Ай бұрын
Wow, I'm totally impressed. Now start playing with timing and lower it if you haven't already, but I bet you can get 100 mph. Also, hv lipos
@rccarsandmusic2641Ай бұрын
Where's the Vendetta reissue? We are all waiting!
@CbrRobАй бұрын
Try It on 6s, also I have seen a custom center shaft and you can run any mod 1 gears
@DavidJones-wu4ydАй бұрын
I'm glad you did that 46 just isn't fast enough
@InnovationRCАй бұрын
I agree!
@NoodlesNJ1Ай бұрын
Dammnnn Kidd!!
@WewuzKangz85Ай бұрын
Sheeeeeeesh!
@nutsnbolts4601Ай бұрын
Hey brother where did u get the tie rod ends on vision front and back especially the front because I removed my springs and I don’t wanna mess with the dwrop screw? I kno I didn’t spell that rite however I don’t wanna mess with it I don’t see the cents in bending parts of the driveline from doing that on to the frame 😂so this is why I wanted to ask u because I wokld like to do the same 🎉nice video by the way
@InnovationRCАй бұрын
You can use any rod ends. Traxxas links, Arrma links. Etc just adjust them to your liking. I'd get a short and a long pair of rod ends
@nutsnbolts4601Ай бұрын
@@InnovationRC thanks a lot.
@gillian9178Ай бұрын
Nice runs man, what wheels did you use?
@InnovationRCАй бұрын
GRP belted tires
@tonysmith7989Ай бұрын
Does it not have AVC?
@christopherscott934Ай бұрын
What gear configuration is in that Typhon?
@frederickgrassie338326 күн бұрын
Any way you could do an ESC fan install and diff removal and install for us new people? Just got s223 v4. Please
@dirtysoufracing6029Ай бұрын
5s time
@InnovationRCАй бұрын
I agree!
@danielc5191Ай бұрын
Will the motormount fit a 4274 motor?
@InnovationRCАй бұрын
It might. Going to try out some fitting options next week
@danielc5191Ай бұрын
@InnovationRC if it does, this can go beyond 100mph on 4S. drivetrain seems sturdy and because the chassis is light, it might hold together and become feasible.
@69pslim12 күн бұрын
Need a little advice please, i want to run the stock set up, but i want to reach speeds over 50 mph what size pinion gear should i run? It comes with a stock 16 pinion gear.
@InnovationRC12 күн бұрын
I'd go with a 20t pinion gear at least. Then the sky is the limit!
@69pslim12 күн бұрын
@InnovationRC ok cool, man thanks. I came to check out the RC store but Jay said you were no longer there. I wish I could've met you in person man. Thanks again 👍
@paulhogg7659Ай бұрын
Put a mod1 spool in
@InnovationRCАй бұрын
I need to find one
@paulhogg7659Ай бұрын
@InnovationRC can you not make one like on the first car it's quite simple
@davidrivero7943Ай бұрын
You did say something was coming . Let's rip the new creation & oohhhh my hat lol ( telecomandos intro)
@InnovationRCАй бұрын
Haha yessir!
@NCMATTАй бұрын
Run that motor on 6s
@redeyeriley4299Ай бұрын
100mph please. 🚙 🚙
@InnovationRCАй бұрын
Next Saturdays video! I'll try my best! Already maxed out with gearing
@jradddsr5444Ай бұрын
I have the blx typhoon grom that is not a grom to big
@InnovationRCАй бұрын
I never said it was a Grom
@jradddsr5444Ай бұрын
@ I never said what it was and u know calling it a 223 come on man really
@butchmeister80Ай бұрын
Colour scheme on these are bad.
@InnovationRCАй бұрын
I agree!
@butchmeister80Ай бұрын
@ new wheels would look good on the old typhon though