Artillery X3plus review + Nozzle swap (and hotend repair)

[@blackmennewstyle]

Got my first 3D printer back in 2018, one of the best decisions i have ever had lol Its uses are tremendous and beyond just RC related stuffs, you can design things useful for FPV, CNC, server rack and even crypto-mining lol 3D printing is absolutely amazing 🔥🚀 Have a great week ahead Mario and keep on unleashing that creativity 🙏🏽💪🏽

[@Rcschim]

Thanks for the nice comment Cedric. Nice to hear from you - hope all is well in Thailand! Greets and have a great week too!

[@MCsCreations]

Fantastic review, Mario! 😃 It's really interesting to watch the 3d printing market advancing... It's getting better and better for us! Stay safe there with your family! 🖖😊

[@Rcschim]

Thanks Mario!

[@maelradec6766]

This is why you are the man, you covered everything and mods. cheers boss

[@pokiou]

Go to your slicer.. look at the custom gcode start up section. After where you see G28, go down 1 line and type M420 S1 Z5... you have to manually tell the printer to load the bed level mesh... i know this is old but this is to help those who are having issues and why there beds after doing the ABL it still screws up. The code i provided up tells the the printer to load the mesh stored in the memeory slot 1 and to use that mesh for the 1st 5 layers or 5 mm of the print.

[@Povwoodworks]

Wont it be better with just M420 S1? if you use the mesh for only 5 layers - wont it go shitty after that?

[@MrBaskins2010]

glad i found your channel, would love to see you try a 1.5mm CHT clone nozzle i saw online recently

[@Rcschim]

Not sure if such a large nozzle could be feeded by normal hotends. They become the bottleneck for sure quite literally ;) 0.8mm is already pretty large imho.

[@comunismo_diversión]

nice video! thanks :)

[@MisterGarp]

I just bought two of these and cannot get either of them to finish a print. the extruder stops extruding and the head keeps moving as if it is printing. If I stop the print, then manually extrude from the panel, it extrudes again. Any thoughts on where the failure may be? Arty support is useless.

[@Rcschim]

On your manual extrude: do you use same temp as on the print? On the print: does it really fail to extrude or is it rather extruding in the air instead of printing on plate/prev layer?

[@MisterGarp]

@@Rcschim yes same temp. Its like the extruder just stops for no reason in the print. I come to the print after it runs overnight and the head is up off the print with nothing coming out

[@ikaatzesp]

How did you change the nozzle?

[@shogo8633]

I have one and it clogs extremely easily. The only filament I have been using without clogs is sunlu pla. Does it happen the same to you? I am considering to switch to a ptfe barrel

[@Rcschim]

No, I think I didn’t have a clogged nozzle yet on this one. But mainly printing pla or sometimes tpu. After 1 month I changed the nozzle now to 0.8mm and I don’t think you could clog this ;)

[@TheFeralEngineer]

I just got Klipper running on mine 😀

[@Rcschim]

I got Klipper running on my new x4 plus now, per default ;). Even comes with fluidd as a default, and root access via ssh.

[@TheFeralEngineer]

@@Rcschim that's no fun. OEM tainted Klipper isn't true Klipper.