How To Build Shop Cabinets / DIY Shop Cabinets / Workshop Organization / Huge Workshop Upgrade

Shop Cabinet Plans: etsy.me/36uTI81
In this video I will show you how to build shop cabinets. These cabinets are designed to hold an extraordinary amount of weight, and will not bow over time. This video also includes the step-by-step procedure for building custom shaker doors. For additional storage, I show you how I build a tall cabinet that extends from the floor, to the wall cabinet. Plans are available in my Etsy Shop. Link is above.
Artisan Made Truckers Cap: etsy.me/3qIwqT4
My Etsy Shop: etsy.me/3qgDnr8
Links to Materials:
Concealed Hinges (Full Overlay): amzn.to/3NnGg6j
Shelf Pins: amzn.to/3Llg4HT
Cabinet Handles: amzn.to/35aA00s
T-Nuts: amzn.to/3uAttoK
Bolts: amzn.to/3IKHvsD
Pocket Hole Screws: amzn.to/3tG4u47
Edge-Banding: amzn.to/3DaoQp7
Polycrylic: amzn.to/3D96Ds4
Links to Specialty Tools:
Kreg Pocket Hole Jig: amzn.to/3iBEZuh
Kreg Shelf Pin Hole Jig: amzn.to/3JINI9M
Kreg Concealed Hinge Jig: amzn.to/3tDI57g
Edge Banding Trimmer: amzn.to/3JKgN4I
Edge Banding Cutter amzn.to/3IMEg4g
Tongue and Groove Bits: amzn.to/3LmagOl
Self-Leveling Laser: amzn.to/3lT0yJ9
My Website: www.artisanmad...
Follow: / artisanmadethings

[@CoHamGuy]

Go Avalanche! No seriously, go Avs :) I like your creativity to link clamps to make them longer, not sure I ever did that before but I will for sure now.

[@mr.k970]

There's a Dartboard, great!!! Game on!

[@jaysgarage2769]

Hell of a job looks great

[@jwar2163]

I have used Lauan plywood (also known as Luan Plywood) for doors centers and drawer bottoms. It has a smooth side and a blemished side. I used to skin doors in apartment complexes due to investors not wanting to spend monies for new doors. Sometimes I would glue it to a sheet of 1/4 oak ply or veneer it with a hardwood veneer. Again when I did apartment repairs to cabinetry in the apartments.

[@johnmanfra4224]

This came out fantastic man. I love how you went up high with them too so you could use all of the useless space above.

[@ArtisanMade]

Thank you brother!!!

[@robthewaywardwoodworker9956]

Good looking shop furniture!

[@geofferyhess9676]

FANTASTIC WORK poplar is very abundant here in northern wi I will have to use that to build my cabinets too thanks

[@ToddFinnCFA]

Great work my man. Looks awesome and that is a crap load of storage! Just started using Luan for my drawer bottoms on this advice. Would have saved a lot of money if I found this sooner. Keep up the great work!

[@lettersandlove]

Fantastic build to keep the shop organized!

[@ArtisanMade]

Thank you!

[@CF542]

Amazing work! You have tools I don't have so I don't think I could make these very easily.

[@NWGR]

Great job! Subscribed. 🙂

[@tomhostetter8516]

Heya Artie, see you been Busy, me as well about to put up my last piece of 2' insulation foam board in the new shop. Hard to believe it's been 2 years since I made Sawdust. I'll shoot you some photos in a bit... have a great day!

[@ArtisanMade]

2 years already? Congratulations on the new shop. Starting over and Having a blank canvas for a new shop is exciting. Looking forward to the pics.

[@tomhostetter8516]

@@ArtisanMade sent them via Instagram

[@Mark_Wood]

Oh, you're a homebrewer too! We have the same hobbies

[@ArtisanMade]

Yes we do mark! I love brewing. I’m hoping to brew something soon. Maybe a bourbon stout.

[@Mark_Wood]

@@ArtisanMade Just did a Serrano Pale Ale. Awesome. Also, I did the same thing drilling the door pull holes in the wrong location when I built your assembly table/outfeed table last year 🤣

[@jwar2163]

Cheap pipe clamps will help you with those wide glue ups until you can get you some parallel clamps. As for orienting your material use chalk it wipes off easy and help keep parts in the correct place or Avery labels that clean up with denatured alcohol.

[@rickchichester9327]

Awesome

[@sillykicker0877]

I have been dying to do this in my garage. Currently I have wire racks that looks ugly. Thank you!

[@ArtisanMade]

This was a game changer for me. So much more storage.

[@edgararcega3046]

"Only shop furniture " he says. These cabinets look better than what i have in my kitchen right now. Very nice. By the way is it true that adding such cabinets to garage increases the home value?

[@ArtisanMade]

I think a well-organized garage will at least attract more buyers.

[@zprobegt]

1 year in is there anything you’d do differently on the design? My main question I’m trying to figure out with my shop cabinets is whether a face frame would keep more dust out of the cabinet. Do you find the gap between your doors lets in a noticeable amount of dust (even with good dust collection I still get a small layer on exposed surfaces, wondering if I’ll regret full overlay vs face frame)

[@ArtisanMade]

I’m very happy with them. I haven’t noticed any dust build up. I actually keep some canned food products in one of them.

[@zprobegt]

@@ArtisanMade thanks so much for replying!!! For sure going frameless will save some time and now I’m not so worried. Appreciate you!

[@Bigdog1787]

Hmm looked for a video on the workbench that's in the corner you don't have one on it. No one builds them with drawers that has a hutch. It's not exactly what I want, but closer then anything else I seen be easier to modify the design though. 🤭 It would of probably give ya good KZbin content as no one else really has that on their channel I know as I've looked they just ones without drawers or just had designs.

[@ArtisanMade]

If only I could turn back time. I built that before I ever thought of starting this channel. It has been a very efficient use of that space.

[@mattfecteau1205]

How do you like the WEN track saw?

[@ArtisanMade]

I hate it. I should have saved up and bought a quality one.

[@GregsWorkshopOregon]

Do you prefer the Kreg or Milescraft pocket hole clamps?

[@ArtisanMade]

I prefer the milescraft. Feels like it’s better quality

[@Rufio6814]

The hinges you linked are half inch overlay, do you have a good full overlay one for frameless that you like that's cheap?

[@ArtisanMade]

I just checked the link. These are full overlay. I was pleasantly surprised at the quality, but I didn’t bother installing the lights that come with it.

[@1144panda]

Where did you get your orange push stick? Great job on the cabinets!

[@ArtisanMade]

I printed it on my 3d printer. If you have a printer, the files are online for free.

[@1144panda]

@@ArtisanMade thanks

[@1965JB]

Did I see a whole bunch of fishing rods in there? Looks like my closet.

[@ArtisanMade]

There’s a lot more in the shed. If my wife can have a shoe for every occasion, then I want a fishing pole for every occasion

[@1965JB]

@@ArtisanMade Same here! I’m almost embarrassed, I don’t even have a boat. I could probably keep 3-4 out of the 20 I have and never know the difference.

[@robertfontaine3650]

Looks like a kreg advertising video.

[@mareikemuller5255]

p̷r̷o̷m̷o̷s̷m̷ 💯

[@janodjano5828]

By far the best background music, But the accent and sweatpants just ruined it ….

[@ГлебНехорошев-ц7ы]

Ну вот... как же теперь без холодильника???