THREADING THE OVERLOCKER

In this video we will show you how to thread Chinese overlocker/serger Meishi GN1-1. It’s not hard, but it’s tricky.
►NOTE◄ First unplug the power cord for safety!
Use tweezers to thread the overlocker easier.
☼ Threading the upper looper: 0:08
►NOTE◄ Removing the side plate is optional You can thread the upper looper without removing the side plate. However, if you remove it - use a magnetic screwdriver, because the screws are very small and you can lose them.
☼ Threading the needle: 2:48
In my experience I found that the tension dial on the needle thread should be tighter than the upper and lower loopers. But this may vary for the different types of threads.
☼ Threading the lower looper: 4:27
►NOTE◄ The flywheel must be rotated only towards the back of the machine /clockwise/
🧶 Like & Subscribe for support!
❤️ Facebook: goo.gl/mC9cP0
❤️ Instagram: / artofclay.bg
📧 Collaborations/Sponsorships: [e-mail]
☕ Enjoy the content? Support me with a 'Super Thanks'! Click the button below the player to buy me a virtual coffee. Your generosity keeps the content coming! 🙏
►MUSIC:
Intro - Jim Yosef - Lights [NCS Release]
Defqwop - Awakening [NCS Release]
OUR PLAYLISTS:
★POLYMER CLAY: goo.gl/rMdqFJ
★POLYMER CLAY TIPS: goo.gl/aq74YG
★SEWING FOR BEGINNERS: goo.gl/GFriEQ
★DIY IDEAS: goo.gl/Y9chwi
★GARDEN: goo.gl/xhIbDk
★BLOOPERS,OUTTAKES & BEHIND THE SCENES: goo.gl/Ljj6fk
★FACEBOOK PAGE VIDEOS: goo.gl/tgWB05
===============
CHECK OUT OUR SECOND CHANNEL:
►goo.gl/z4QjW8
❤FACEBOOK PAGE: goo.gl/FmVBFh
❤TWITTER: / artofclayblue
OUR PLAYLISTS:
★FREE FOOTAGE: goo.gl/nPKi77
★TIME-LAPSE VIDEOS: goo.gl/g3bCfY
===============
♫MUSIC:♫
►Connect with Audio Library: goo.gl/MTsLfM
►Connect with KZbin Audio Library: goo.gl/vlaaZr
►Connect with NCS:
• / nocopyrightsounds
• / nocopyrightsounds
• / nocopyrightsounds_
• / nocopyrightsounds
• / nocopyrightsounds
• / ncsounds
• bit.ly/SpotifyNCS

[@escuelaportal]

Look at me, am now a professional. Thanks for the tutorials.

[@alongerejoice3822]

For the past 4 years have gotten this machine, I never use it before of the settings. Your illustrations help me out.. thanks a lot..😊

[@dusskkyy]

This is the only video I could watch on 2018. Helped me a lot to use my Yamato machine...

[@ArtOfClay]

I'm glad the video helped you with your Yamato machine. Happy sewing! 🧵

[@fingaesperansa6507]

My wife bought this machine 18 years ago and she has just figured out how to thread it because of your video. Thank you.

[@ArtOfClay]

Thank you very much for the feedback! I am glad to hear that the video was helpful. Best wishes!

[@nelsonaliasot4998]

@@ArtOfClay q

[@fouziaasi951]

​@@nelsonaliasot4998

[@jazelannedivinagracia4632]

thank you for your video i know now how to thread my machine, but i have a problem on the thread the upper and lower threads always cut off. can you help me what to do with this?

[@_Ayush977]

L​@@fouziaasi951

[@livingbreadmag]

Thank you. For so long a time, I've not been able to use my interlock machine. The illustrations guided me. Thank you.🙏

[@martin_voxmartin]

Pfff thanx a lot. After 30 years on the attic , after a find on the street in Amsterdam he finally works again. Like a fine tuned steam machine Wat a good quality

[@vimalasargunam2098]

Best over lock teaching video in KZbin channel. I don't know any basics in over lock machine. After watching this video, now I can able to do changes in over lock for connecting the threads. Thank you once again for this wonderful video. Keep rocking 🎉

[@ArtOfClay]

Thank you very much for your comment! 😊

[@lindamuyoka5881]

You are God sent!!I keep referring to this video very often.I used to pay someone to do this !but now I can save some coins.A big thank you from a self taught fashion designer in kenya.God bless you

[@ArtOfClay]

Thank you very much for the comment! :)

[@ytrquwywg7572]

....

[@osuntolaaminat7637]

U are a life saver..the machine almost frustrated my life. God bless you

[@Ramkatta]

I never ever sean This is absolutely correct Professional are always showing capacity of professional personality ❤❤❤❤❤ Thankyou soooomuth maym ji🙏🙏🙏🙏🙏

[@ArtOfClay]

► How to change the blades: kzbin.info/www/bejne/fYTZc6eMiLKKatk ► How to change the threads in seconds: kzbin.info0f-3DlvBNk0

[@josefamadalena9593]

Parabéns você foi o único que me fez realmente entender como passar as linhas 👏👏👏👏👏👏♥️♥️♥️♥️♥️

[@marcelofranco5278]

Excelente explicación. Video muy ameno. Muy bien hecho. Nunca había enhebrado una remalladora. Con este video dejé a mi madre más que feliz. Pude enhebrar sin problemas los 3 hilos en las 2 lanzaderas y la aguja. Very good explanation. Many thanks. Without this very well done video I would never make the thing done.

[@ArtOfClay]

Thank you very much for the comment. :)

[@amynatamayanja751]

Wow veeery good video! Couldn't have demonstrated it any better! Thanks a lot! Bless

[@leangpovreangsey6656]

Thank you so much!!!! I thought I ganna get in trouble for breaking my aunt machine, but thank to your video, I fixed it!!!!

[@ArtOfClay]

That's great to hear! Thank you for your comment. Happy holidays! 🎄

[@dinushaneranjan]

Thank you very much. My mum has exact machine. I did it correctly by watching this. Perfects. Thanks a lot...

[@ArtOfClay]

You're welcome :)

[@nimistv]

Thank you so much, this just made my day. My machine as been there for days just because I didn't know how well to pass the thread. God bless you

[@ArtOfClay]

That's great to hear! Thank you!

[@HannahAM]

I have never used an interlocking machine before but this video helped me thread mine without a hassle. Very very helpful video! Thank you very much!

[@ArtOfClay]

Thank you for the kind words! Wishing you lots of luck! 😜

[@norma6432]

Salamat sa mga ttutorial sa threading ng overlocker, sana magpatuloy at hindi magsasawa sa pag bahagi ng inyong kaalaman.

[@ArtOfClay]

🙏😊

[@ahmdjoiya]

To the point and easy to understand. Helped to thread my machine for the first time. Thanks!

[@ArtOfClay]

Thanks for the feedback. 🙂

[@jailuxmi5649]

Thank you mam ❤️ very helpful to me because i bought 10 days before but i don't know what to do? But i started now learnt more from your guidance thank you for your vdo ....

[@debbybeads5298]

Best tutorial video ever You're the best tutor 😍

[@ArtOfClay]

Your comment truly made my day, and it's an amazing birthday gift to receive such positive feedback. Thank you, and have a fantastic day! 😊

[@lian7217]

grabeng buwis buhay naman toh..hahaha..pero kakabili ko lang nung ganyan ko.salamat

[@June-le1rz]

Thank you so much. I was able to thread my machine using this video as a guide.

[@losdisenosdeisa3917]

Muchas gracias... compré esa máquina de uso... Se le aviso reventado el hilo de abajo.. Estaba muy preocupada ..y su video me ayudado a hebrarla... gracias muchas gracias. Resivan saludos desde cotzintla Veracruz México

[@odekeyeoluwadamilola8189]

This is best video I have watched so far... I don’t usually comment on KZbin but I just have to. Thanks so much God bless you

[@ArtOfClay]

Thank you for taking the time to write me a comment. I deeply appreciate it! Have a warm holiday season and happy sewing! 🎄🎄

[@devikashanthani9579]

🤨.

[@user-zm7zt6vx4w]

Большое спасибо за подсказки,давно такой стоит без использования. Буду пробовать заправлять и шить!

[@pmxoxo]

My mom has exactly the same machine. Just looked at it just now and was trying to figure out the threading. Thank you very much.

[@mobitmuyang2310]

Thanks so much..

[@oluwayemisiarogundade2312]

Thank you. I was able to understand it, perfectly.

[@ArtOfClay]

I'm glad to hear that! 🙏😊

[@ifeomahelen2052]

Thank you for this video. It helped me thread my machine yesterday. Thank you.

[@careemkj1334]

Perfect overlock threading video I ever watched 👌

[@ArtOfClay]

Thank you! ☺️

[@philixphill5276]

It comes out beautiful. Thank you so much.

[@Jolliesvibes]

This video is a life saver..... it is very very useful and informative.... 👌

[@ArtOfClay]

Thank you! 😊

[@charinacaballero211]

Thank you. I just bought this kind of machine. This video will help a lot.

[@varunb1272]

Very clear video

[@sharonpitters604]

Thank u ,excellent I have a 3thread locker and have not use it because I can't thread it,now I can.Appreciate.

[@ArtOfClay]

Thanks :)

[@yen191channel]

Thank you so much.I've learn a lot from you.this really helps me in my sewing journey

[@ArtOfClay]

You're welcome! I'm delighted to hear that my video has been helpful to you in your sewing journey. Keep up the great work, and happy sewing! 😊🧵

[@AS-rc1jr]

Qué bonita máquina! Se ve antigua😍, muchas gracias por mostrar🥰👍💕

[@user-il4vt8ix1w]

Спасибо огромное!!! Теперь так классно верложит,а меня не правильно раньше информировали, ещё раз огромное спасибо!!!

[@rosettasungu5583]

Thanks. Very clear guide.

[@FatihaTouariaelmeliani]

Thank you very match from algeria ❤

[@gabrieladecarlo9772]

The best video in the world! Thank you so much ❤❤❤❤❤🇧🇷🇧🇷🇧🇷

[@ArtOfClay]

Thank you for your comment! ❤

[@aileendelosreyes5660]

thank u so much its really help me a lot because thats my edging too👏👏👏👏

[@oluwaseyieunice4688]

Exactly my machine........ I couldn't have threaded it without your video, thank God for sending you! I'm grateful 😘😘😘😘😘

[@ArtOfClay]

Thanks for the feedback and happy sewing! :)

[@johne.hjemaas61]

Svært god demonstrasjon av prosessen. Takk. :)

[@theresachidothi480]

Thank you so much for these videos,I have learnt a lot. Kindly do one on skipping stitches

[@suewild1207]

This is an OUTSTANDING video.....I speak from the platform of a technical twit. Thank you very, very much

[@emmanuelidiyang6312]

Thanks so much, your video really assisted me in threading my machine

[@mohamedriham9063]

thanks for sending this

[@desigbyhayz]

Very good video, figured out mine with one look at the tutorial.

[@alzaeim3322]

=

[@evelitabernil9566]

wow ang galing ..gmyan kc edging nmin .dp ako mronong mg soot ng sinolid..slamt s pag demo . God bless.

[@unusualnezer]

Thank You! I've been so stressed!😂😂

[@ArtOfClay]

🤣

[@gnmaderna800]

Thanks!!! This machine is tremendously complicated for me bur you have made it easy to understand putting threads

[@chaymabs6636]

Merciiiiiii enormément 🙏🙏🙏🙏 ca fait 3 jrs stréssée de ne pas s'avoir faire correctement 😊😊😊

[@huynho8046]

Cám ơn bạn rất nhiều đã bỏ thời gian hướng dẩn cho chúng tôi hiểu được nhiều xâu chỉ

[@mariaserrano5195]

You can make a video where you explain how to adjust the presser so that it rises. If you already have it, you can tell me what it is. You explain very well. Thank you.

[@ArtOfClay]

The machine is designed for sewing only fabrics up to 4mm thick. Therefore the presser foot can be only raised slightly. If it can't be lifted at all, you can try to reduce the presser foot pressure by slightly unscrewing the screw that sticks out behind the needle bar (on top of the machine). (If you look from the side, the screw leads directly to the lever to which the lifting pedal is connected).

[@herelyndonald9261]

Thank you for this video it help mi thread my machine. 👍

[@mariateresaranara3877]

Have a blessed day thank you sooo much for your sharing great vedeo for yamato edging 🥰👏🙏🤗

[@ArtOfClay]

You're welcome! I'm glad that you enjoyed the video and found it helpful. Have a blessed day as well! 🙏😊

[@mariaguerra8231]

wow yo creia que mi maquina era dificil pero mie que estas es mucho mas compricado pero muy bien espricado gracias

[@afridora9362]

Very clear and beautiful. Thank you so much for this tutorial.

[@ArtOfClay]

Happy sewing! 😊

[@faithnewsom9753]

Thanks a lot. I have had this machine for almost three months now. Just setting it up with this video because there was no details in the manual l

[@anamercado8600]

Magkano po ganyan

[@chidinmanwankwo5450]

I got value from it, much appreciated

[@joefix7120]

Thanks for watching your video, very helpful to me, how to do thread the over lock sew machine

[@shaunaclarke9630]

Thank you God bless you too

[@MARFRAMORA]

I really thank you for this vídeo. That is what I was looking for

[@ArtOfClay]

You're very welcome! I'm glad the video was helpful for you. 😀

[@raoofaather1072]

Thank you for sharing 👍 Such an amazing method.. It works very well... Thanks a lot!!!!!

[@user-eh5iz1gr4x]

Благодарю!!! А то долго не пользовалась,подзабыла и не могла сама заправить нити.

[@jouhianamansouri328]

تم

[@arinolastitches]

Thank you. It was very useful 🙏✌️

[@charitygichuhi2709]

Thank you so much, I can now thread on my own❤

[@Gennyuzowulu]

This was so helpful tnx a million times

[@samirasameersameer2043]

Hello thank you so much i managed to fix thread in my new overlock machine

[@ArtOfClay]

😊

[@carolinemangicho7201]

Thanks for this.... I did it perfectly....🙏

[@MariyahChauhan]

You saved my life

[@marydavidson9944]

Excellent! And I am hoping I can get mine threaded now!

[@emanuelishayo3431]

Machine ya overloki shingapi

[@tinaeyiowuawi608]

Great job. It will be appreciated if you can make videos on Solving Problems of Overlocking Machine ẹ.g. how to adjust stitches etc

[@user-wv1xc7yu9y]

Спасибо большое, это единственное подробное видео, где все понятно показано👍👍👍👍

[@ArtOfClay]

Спасибо за комментарий! 😊

[@user-uq3ns5lf3b]

Лилия, поддерживаю вас! Действительно это единственное видео, где очень четко с отличным освещением все досконально показано. На сегодня у меня есть четырехниточный, а этот оверлок давно стоит без дела, решила заправить на всякий случай. Респект автору ролика!!😘💓👍

[@ArtOfClay]

Спасибо за добрые слова! 💐

[@estherokolie9265]

Thank you so much, u just saved me.

[@GWISE.APPAREL]

Thanks so much for sharing. Really helpful

[@ArtOfClay]

My pleasure! :)

[@user-ig7pp9td2g]

والله يعطيك الصحة كي فهمتنا ربي يجازيك الخير

[@bibianmurillo5645]

Muchas gracias desde Medellín Colombia no creí encontrar la explicación ya que es tan antigua muchas gracias👍👏

[@mariaceciliateixeirapiresc9369]

Vídeo direto sem enrolação zom maravilhoso brasileira agradece, obrigada por ensinar 👏👏👏👏

[@mariaceciliateixeirapiresc9369]

Thank you

[@ArtOfClay]

☺️🙏

[@thathsaranichathurani3320]

Thank you very much..This video is very use ful

[@lparnell5693]

Seriously THE best video, thank you

[@ArtOfClay]

Thank you very much for the kind words! :)

[@shiranidesilva8018]

Useful information about the machine.Thanks for sharing.

[@TesssnetTV]

Thank you very much for this useful video from Senegal !

[@ArtOfClay]

You're welcome! 🙂

[@kimberlymalsumen443]

Thank you so much more easily for me.

[@skittle_6645]

Perfect. Thank you!

[@toullinnedonyazzedchorfi7697]

شكراً لك على هذا الفيديو لي ايام وانا حائرة كيف اعمل بها وشكر لصديقة هي التي دلتني على هذا الفيديو

[@raihanasabandal406]

Thank you

[@pablosambrana4116]

You´re the best! Thanks you very much!

[@ArtOfClay]

Thank you! :)

[@pennyaa2]

Thank you for posting this as I have had my machine for months and didn't know how to thread it.

[@wilmamarinha5673]

Como passar Linha na máquina Industrial Orverlaque

[@marvelousmazeedah8705]

Very straight forward video Please what type of thread should I use for the over locker?

[@ArtOfClay]

Hi, thank you for your comment! For this overlock you have to use polyester high speed sewing thread. I am using 120 spun polyester spools.

[@user-xk1cg1te3w]

تسلم تسلم إيديك وعنيك طريقة سهله وجميلة جدا

[@totals4897]

هلو شخباركم

[@ceciliadelabastida6081]

Un millón de gracias Lo voy ha hacer. Dios te bendiga.

[@pathminijayasinghe5046]

it is very helpful.thankyou .

[@m33natajibola18]

You're the best. ❣️💃

[@ArtOfClay]

Thanks! :)

[@jeevathamby6102]

Very clear usefull. Thanks

[@suganthans8405]

You clearly explained 🙂

[@AbosedeAkinropo]

Wow! Thank you!

[@anniehouziaux7045]

souvenir souvenir !! de très bonne machine à l'époque et plus costaud !!

[@shanthic3296]

Super. Good job. Thankyou