Ash handling system power plant dome valve dome seal pneumatic cylinder SOV live ash handling system

[@radha-k3d]

Valuable work ...... impressive ❤️

[@ParmodKumar-tj8dm]

Aapke smjhane K trika bhut acha h Sir very thankful video aagye mere dost v daikhengye shaire kr diye h nc no contact kaise bnte h instrument level jaise K presser switch practically

[@eidilipsahani6800]

Thankyou

[@sukhdevsharma4211]

Jabardast mere bhai.....thank u 🙏🙏🙏🙏🙏🙏.....brother master and slave and different selection of mode.....kaise karte usape bhi video banaoo please

[@eidilipsahani6800]

Sure buddy give me some time I will definitely make some videos on it.

[@abhinav.rathore]

Bhai aap ka video content mast hai...keep it up..aur v video banao.

[@tanveerrahmat5866]

Nice work and congratulations for the channel nice informative video about APH.....keep it up👍👍👍

[@Amit4-Q-4]

Thanks sir for this information pressure switch ke connection aur kaise kaam karta hai btaye pls

[@eidilipsahani6800]

Bhai pressure switch ke connection wo drawing se mil jayega and kam kaise karta hai wo same as other pressure switch karta hai woise hi hai woise me us pe bhi video banauga with practical application.

[@kiniandaligang]

Nice. Good job 👍

[@AnkitSingh-ln8eg]

I think a good video for education purpose.👍

[@ParmodKumar-tj8dm]

Sir 1hi video h aapka jo sbse best h aur v bnaye sir instrument realated I'd fd pa

[@eidilipsahani6800]

Thanks bhai plant Me kam jayada hai projects chal rahe hai time milte aur upload karta hu.

[@ayubansari9634]

Thankyou bahu अच्छा वीडियो h siR

[@eidilipsahani6800]

Thanks

[@officialdishant3226]

Good keep it up👍

[@pratushkumar5253]

very nice keep continues 🙏

[@eidilipsahani6800]

Thanks

[@sra1649]

Nice explanation.

[@eidilipsahani6800]

Thankyou

[@akashnarlawar7461]

good information sir Ash handling system prr interview questions banao

[@eidilipsahani6800]

No one can ask of it but if u want to prepare it's details like size and capacity which are mention in your manual

[@RakeshKumar-yl3ff]

Very nice sir

[@jituchaudhary2516]

Achha video hai air banao👍

[@ushachaudhary2294]

Good for knowledge

[@sabirali-ts8ji]

Please prepare vedios regarding supercritical boiler operations. Regards,

[@eidilipsahani6800]

I'm not getting you buddy??

[@jaysoni4385]

Valuable knowledge ❤️sir

[@eidilipsahani6800]

Thanku

[@pkentertainer4824]

Very informative sir. Too too good. What should minimum pressure of seal and conveying in ash handeling system.

[@eidilipsahani6800]

Seal pressure 5.5 to 6.5 bar Conveying pressure 4.5 to 5.5 bar Or as per your Manual.

[@pkentertainer4824]

@@eidilipsahani6800 Thankyou sir.

[@pkentertainer4824]

I'm waiting your next video

[@eidilipsahani6800]

Welcome

[@ahirsunil1914]

Nice sir...

[@souravde6322]

Nice explanation

[@eidilipsahani6800]

Thanks❤

[@lalitajit5252]

ESP ke d pump related video bhi Bana ke upload kariye.

[@eidilipsahani6800]

I will

[@RajnishKumar-tn7if]

Thank you 💕😊💕

[@VinodSingh-yw5rr]

Aph system me seal pressure gauge me so karne ke liye alag se sov lagane ki jarurat padati hai sir ji

[@eidilipsahani6800]

Already diya rehta hai gauge which I already discussed in my this video at panel area kindly visit and check out one more time

[@amirulislam7147]

Thank you so much

[@amankamble4689]

Thank you sir ❤

[@eidilipsahani6800]

Thanks 🙏

[@suparintenar5265]

Nice video

[@SanjayKumar-wi7lp]

Ser dom seal bar bar kat jata hai to kya karen

[@eidilipsahani6800]

Cause kya hai wo pehle find out karo apka problems solve ho jayega

[@VinodSingh-yw5rr]

Sir Ji aap jo equipment lage hai use or details me video banaiye and uski jarurat kyo hai ye bataiye

[@Ram-sx5mv]

Mster slave p video bnao sr🙏🙏

[@eidilipsahani6800]

Jarur banauga

[@abhishekrai6006]

Sir! We need more Videos....

[@eidilipsahani6800]

Thanks for the comment champ but due to work load i am not able to make a videos right now.

[@koknisnehal7473]

Plc ar dcs ka es system ka video bhi banaye

[@eidilipsahani6800]

Kya hai ap ka question thoda detail me bataiye.

[@Engineer24105]

Thanks 🙏🙏🙏 bro

[@eidilipsahani6800]

Welcome

[@kuwarkhandelwal3485]

Vessel pressure bhi hota h ? Iske baare m btayiye

[@eidilipsahani6800]

Ap sayad back pressure ke bare me bat kar rahe hai or seal pressure and conveying pressure hota hai ap thoda details me bataye to me ap ki kuchh help kar saku.

[@MANOJYADAV-oc8hr]

Line change kaise karte h, aur image ke sath allpart ka name bataye

[@sureshanna6686]

Nice

[@rahulmeshram2212]

Nice sir

[@eidilipsahani6800]

Thanks

[@ravinagar2367]

And one more question What is the difference between Instrument air and conveying air? (I mean that conveying ke liye instrument air ka use kyu ni karte hai?)

[@eidilipsahani6800]

Instrument air ka cost badh jata hai because of dryer n all so we can't use in company our first priority to minimize the cost.

[@you-can-treading]

sil pressure nahi aa raha hai sir... sab chek kar liya n sab sahi hai

[@eidilipsahani6800]

System ka pic dikhao apne

[@souravdey3878]

Sir oo jo 3 pressure switch he, usme 1 seal pressure and 2 back pressure keliye he. So plz mujhe yeh bolia ki 2 pressure switch hum back pressure keliye q use karte he.

[@eidilipsahani6800]

Kabhi kabhi system ko ye bhi pata hona chahiye ke conveying air pressure healthy hai ke nahi to uske liye ek aur pressure switch hai

[@VinodSingh-yw5rr]

Agar lagane ki jarurat ho to kaise laga sakte hai

[@bharatmali8002]

Sir ash handling system me air pressure ki puri cycle bataye ki air kaha se kaha jati he Aur panel me seal pressure nahi aata to kya kar na he

[@eidilipsahani6800]

Sab to likhna possible nahi hai pur seal pressure na aye to direct pipe laga ke check kar lena chahiye ke air pressure utne bar ka hai ya nahi agar hai to dome seal replace kare agar nahi hai to air ko maintain kare

[@Cricketing692]

Liw k bare me v bataiye

[@dancewithhimani7586]

What is the reason if command goes to third field switch valve during second field conveying time.

[@eidilipsahani6800]

Must be check your plc or DCS connection and logics for this kind of issues

[@jainendragaikwad5295]

Seal foult problem occurred frequently in my system pls suggest for 500mw unit

[@eidilipsahani6800]

If you are provide some details like seal pressure set, dome is ok or it's created some edge?

[@ajaysharma-xz5kz]

Sir limit switch kis company ka hai or wo only air se kaam kr raha hai kya

[@eidilipsahani6800]

Bhai limit switch Duncan make hai and ha wo sirf air se kam kare wohi application ke liye hai yaha par.

[@santoshkumarbareth5883]

Sir ji namaskr.. Ash handing start karte h to pahle preser kaun sa kholenge 1inch wala ya 1.5 inch presser plz clear me.. Ok

[@eidilipsahani6800]

Dono

[@bhuwansahu8470]

Sir meko ye achhe se janna hai I'm a instrument technician jayaswal Neco

[@eidilipsahani6800]

Padhai karo jan jaoge bhai

[@NIRMALSINGH-dw8dm]

Bhai isko ek ek cheej ko aur jyada elaborate karke batiye....aur Kya Kya problem aati hai aur u he rectify kaise karte hai plz

[@eidilipsahani6800]

Ap ko jo bhi problem ati ho ap muje batao i will definitely try to solve your problems

[@NIRMALSINGH-dw8dm]

@@eidilipsahani6800 Sir 1-Seal pressure, back pressure,aur conveying pressure Kya hote 2- pressure switch se kiska kiska signal jaata hai PLC ko Aur PLC kisko kisko signal bhejti hai kis sequence me Plz ache se bataaye If it's possible then solve these problem through a video

[@eidilipsahani6800]

1 seal pressure it is for sealing the dome valve 2 Back pressure it is created when conveying line is jammed 3 conveying pressure it is for conveying the ash from vessel to sylo 4 ash handling plant working process. .Seal pressure is healthy then it's timmer will continue and operate the dome after that conveying is done and if line is jammed than back pressure form. In which total 2 sov and 3 pressure switches are use. Which I already told in this video also in this also you will get which singnal comming from PLC and to PLC. If you not getting then free to ask

[@dinabandhumahato6581]

Control valve and mov ka vedio banaye sir please

[@rahulprajapati9053]

Sir please master or slave ke bare me bhi ak video bna dijaye

[@eidilipsahani6800]

Already banaya hua hai ap dekh sakte hai

[@ramgurjar6124]

Silo plant ki A to Z jankari bta do sar ji

[@eidilipsahani6800]

Like what you want from silo?

[@birendranaik7618]

Kese seal pressure check karte hain practicali bataie

[@eidilipsahani6800]

Ap gauge me dekhiye show karega seal pressure pls check in my video 😊

[@rahulprajapati9053]

Sir isme kabhi pressure switch or sov kam nhi kr rhi he to kase check kare please reply me sir

[@eidilipsahani6800]

Agar pressure switch kam nahi jarega tab ap ka system healthy nahi batayega kyo ki no nc signal nahi milega and sov nahi kam kiya to ap ka system like power cylinder operate nahi hoga so ap easily identify kar sakte hai

[@rabindratandakar8058]

Thak you sir

[@yogishattri4590]

Stacker recklmer ke baare mein batayen

[@eidilipsahani6800]

"Stacker reclaimer " I'm not working on it

[@santoshkumarmahto9973]

Seal pressure. Healthy nhi hoga to kya nuksan hoga

[@eidilipsahani6800]

Dome and it's spigot may damage if it is not healthy

[@santoshkumarmahto9973]

Vedio ka link hoga aapke kya

[@eidilipsahani6800]

Konsa video??

[@santoshkumarmahto9973]

Esp details..ka vedio

[@santoshkumarmahto9973]

Ash handling & Esp ka detail..chahiyen with pratical sir....plz

[@eidilipsahani6800]

Ash handling given by om engineering and esp by thermax

[@surendragupta3564]

Dense Phase & Line Phase please explanation .

[@akashasutkar6318]

more information about ash handling ..

[@eidilipsahani6800]

Like what?

[@AkhtarKhan-qc3yq]

Pressure switch ka kam kiya hai

[@prameshpadhan1638]

Sir dome seal kaise change karte hai

[@eidilipsahani6800]

Next time jab seal change hoga i will make practical video on it for you buddy

[@matholiyatasvin37matholiya7]

Hi sir Mera dome seal or dome dono fail huva tha mene new seal and dome install Kya fir bhi second day seal break ho gya to ape reason bata sakte he. Sytem dome seal pressure:-5.5 -6 kg/cm2 rahta he Minimize ke liye koy idea 💡 bata do

[@eidilipsahani6800]

Use heavy duty dome seal i think your problems will solve

[@SurprisedCake-ml2tq]

Sir our basic knowledge

[@eidilipsahani6800]

I am not getting you can please explain

[@ManojSahu-w9g]

Plc me sys chal raha hai but field nahi chal raha problem solve please ji

[@sachindixit4018]

some times cylinder not operate properly( if it slightly t up manually then it open or close) What would reason?

[@eidilipsahani6800]

Check cylinder alignment

[@sachindixit4018]

Same wording used by ele.dept.but I thought there pressure issue(not proper pressure to cylinder )

[@eidilipsahani6800]

Pls explain all the issues if any parameters are abnormal etc so i can explain you mr dixit

[@sachindixit4018]

Primafaice issue that cylinder not operate but after electrical rectified it working normal so I want to know from mechanical point of view, because generally electrical blame to mechanical dept.that cylinder is faulty etc, seal pressure 3.8kg , dome and cylinder proper alignment

[@eidilipsahani6800]

There is no mechanical things i think im also from electrical instrumentation i can do all the things no need of mechanical in pneumatic systems

[@sudhanshukumarsingh6267]

Sir c&i ka kya kam hai ash handling me kripya kar ke mujhe bataiye

[@eidilipsahani6800]

Sab apna hi kam hai bhai jo video me dikh raha hai

[@ajaysharma-xz5kz]

Sir 5/2 sov to double acting valve ke liye hai na fir aapne q single acting bola

[@eidilipsahani6800]

Sorry for late reply its for double acting

[@worldinstrumentationengineer]

BAHUT ASSA VI MASTER SLAV KE BADI ME

[@eidilipsahani6800]

Jarur try karunga us pe bhi ek video banau

[@selva9637]

👌

[@eidilipsahani6800]

Thanks

[@Vijaykumar-zg2nz]

2 we on of valve se pressure drope ho rha hai kya kre sir plz

[@eidilipsahani6800]

Clear nahi ho raha hai ap kya kehna chahte ho achhe se batao??

[@Vijaykumar-zg2nz]

Ok sir

[@Vijaykumar-zg2nz]

Sir mai aap ko video bhej skta hu kis par bheju

[@eidilipsahani6800]

7020173388 call me

[@lokeshverma3674]

Coil ka cnecosion rile me kyse krte hai

[@eidilipsahani6800]

Thoda details me batao kya janna hap ap ko

[@shivapathak66]

Full video banaiye na one by one

[@nathramjangde4034]

Dom sill katne ka karan kya hai

[@eidilipsahani6800]

Air pressure bhi ho sakta hai Dome ka bhi isse ho sakta hai Normal operations ke badh wo thick ho jata hai wo bhi ho sakta hai Ap ko pehle wo pata karna padega

[@sajedursojib453]

What is the purpose of this seal air? Why we have to maintain this pressure pls clarify?

[@eidilipsahani6800]

Buddy I think you are need to study about this and if after that you have any Doubts you must be ask me.

[@sajedursojib453]

@@eidilipsahani6800 ok. What is the purpose of ash vessel booster assembly pls clarify?

[@eidilipsahani6800]

Are you working on it???

[@sajedursojib453]

@@eidilipsahani6800 yes.

[@eidilipsahani6800]

@@sajedursojib453 then why are you asking for purpose I think you better know that is it's use for and if you are facing any issue then I will give you suggestion buddy so must be reffer manual for its purpose

[@rohitkumar-zn1oe]

Kis material ka hai plz name bhi btaiye

[@eidilipsahani6800]

Kindly explain what are you talking about ?

[@rohitsingh-hh3vp]

Vessel pressure high h to kya matlb

[@eidilipsahani6800]

Vessel pressure high hone ka reason ash conveying line chocking hota hai so need to flush your ash conveying line and make back pressure less then 0.5 bar

[@NayanPatil-vm3sq]

Dome value not convingline solution?

[@eidilipsahani6800]

Kindly elaborate your issue so i can understand and give the solution pls

[@biswaranjanmohanty4996]

What are the reason for continuosly dome valve seal and o ring damage

[@eidilipsahani6800]

It's may be poor quality of dome seal you got or may be your seal pressure is not maintain or may be your seal pressure is lower then conveying pressure there is many reasons bro

[@surajyadav-nk2zm]

Sir mujhe pressure switch ke bare me janna hai

[@eidilipsahani6800]

Bhai usme me kya help kar sakta hu ap puchho

[@sonulodha6324]

Sir plc control system samjaeye

[@eidilipsahani6800]

Jarur ek video banata hu plc pe bhi bahot jaldi

[@krushnathpatankar6079]

ऐश हांडलींग के कितने प्रकार होते है

[@eidilipsahani6800]

You must read on google

[@ParmodKumar-tj8dm]

Iska connection jo dcs aaya h o btaye

[@eidilipsahani6800]

Mere yaha seperate PLC panel hai so i can't show you dcs connection but both are same there are IO and you have to select chanel and io in dcs also need to create logics in programing for ash handling system.

[@nagbhushanbhushan8682]

How to find it seal got damaged

[@eidilipsahani6800]

Compare with input air pressure and seal pressure if it is below then you can get it it's seal are damaged simple

[@avadheshshah8900]

master and slave d pump ke bare share please

[@eidilipsahani6800]

Sure give me some time buddy

[@विनोदचौहान-म1फ]

Mastr dom ketne prkar ke fart rhte hi

[@eidilipsahani6800]

Means???

[@ravinaik4085]

Sir inst and service airline connection explain in esp line

[@eidilipsahani6800]

For seal pressure used instrument air and for conveying we used service air

[@rameshpaigwar2707]

Sir mere ko pura tubing bataye ki kaise kare

[@eidilipsahani6800]

Tubes ke bare me janna hai to ap ko uski manual padhni chahiye fir bhi na samjhe to ap mujse puchho me ap ko bataunga

[@rajeshgarai2868]

Ballo Ka Kam Kaya Ha

[@eidilipsahani6800]

Due to temperature line get expand so it will help and save the system

[@Rameshkumar-qy2wh]

Ash handling yer Pressure kya hona

[@eidilipsahani6800]

Tum ko kiska air pressure hona instrument air or conveying air pressure

[@SagarSingh-mo6em]

Hello Sir

[@ravinagar2367]

Sir can u tell me that why does we speak master vessel to master? I mean master vessel ko master hi kyo bolte hai, aisa konse components hote hai ya aisa konsa design hota hai uska? Please tell me in detail.

[@eidilipsahani6800]

Time milte hi master and slave pe video banauga bhai

[@MrRee-mt3gp]

Poppet vavle dismental Kar k Ripering and full name pepper vavle pats

[@eidilipsahani6800]

I will try

[@starngeer12345]

2:55😢cylinder close hai aur aap usko open bol rahe ho ,3:00 mai open huwa hai toh aap close bata rahe ho

[@eidilipsahani6800]

Watch it clearly buddy

[@eidilipsahani6800]

Cylinder open hua means dome close hua and vice versa.

[@akashasutkar6318]

seal pre.is not showing healthy then which types of prb.are created ..nd that time hows chek seal pre.

[@eidilipsahani6800]

Already told in comment if it is not healthy then too system are running then its dome n its assembly may get damage and you can Easley check ok gauge

[@nirmalruidas3243]

Sir hamara system PE roj sil likes hojarahahe

[@eidilipsahani6800]

Seal pressure and conveying pressure kitna hai and seal konsa use kar rahe ho?

[@birjbhushansharma1347]

SUV Mein oil a raha hai air filter se

[@eidilipsahani6800]

Achhe se bataiye ho kya raha hai ?

[@RajnishKumar-tn7if]

Sir

[@ameersohail456shaik2]

Plz tell mi Master Slave operation

[@eidilipsahani6800]

Ok

[@sukhendughara2533]

AAP ka awaz sahi Nehi hai

[@madansidar9346]

PS 1 PS2 PS3 ka matalab kya hai

[@eidilipsahani6800]

It's pressure switch 1 2 3