Ashford Kiwi 3 Assembly

  Рет қаралды 10,274

Adelaide Walker

Adelaide Walker

Күн бұрын

Unboxing and assembling the Ashford Kiwi 3 spininng wheel.
www.adelaidewa...

Пікірлер: 31
@jennifer37746
@jennifer37746 6 ай бұрын
Thanks for your video. So many people said this was easy to do but I was definitely confused at times. The springs and and tension fishing wire part almost had me in tears! I watched your video a few times for guidance so thanks again!
@AdelaideWalkerWool
@AdelaideWalkerWool 6 ай бұрын
Setting up the tension is definitely fiddly. Glad you found the video helpful.
@glendasmith7507
@glendasmith7507 2 жыл бұрын
Thank you for your instruction demonstration. I just received my kiwi 3 yesterday and have waxed/polished all pieces and am ready to put it together.
@ALZulas
@ALZulas 3 жыл бұрын
Thanks for this video! I watched it twice. Once before assembling and once during. Went perfectly!
@Jessesmom12
@Jessesmom12 3 жыл бұрын
I watched before and during assembly. It went well. Thanks. ❤️💐
@terrir780
@terrir780 Жыл бұрын
I've assembled a few wheels before now including one Ashford but this one was a challenge I would have struggled with without your very helpful video. Thank you very much.
@AdelaideWalkerWool
@AdelaideWalkerWool Жыл бұрын
Glad it was useful Terri
@wendyrobinson5523
@wendyrobinson5523 2 жыл бұрын
Thanks for the video. I watched it before I'd even bought the wheel! Then I read the instructions and watched your video again. Then put the wheel together with your video to refer to though these instructions are the best I've ever had for any bit of equipment. As you said, some fiddly bits and some easy bits. Fiddliest was trying the untangle the drive band. Like dealing with an octopus! Thanks again.
@julieanne1277
@julieanne1277 3 жыл бұрын
Thank you x my husband has bought me the Kiwi 3 for Christmas and as I am new to spinning wheels this is a great video about how it sets up x thank you Julie
@janemellowes674
@janemellowes674 2 жыл бұрын
This has been so helpful. Combination of your video and written instructions has meant I have assembled my kiwi 3. Not sure I would have had the confidence to just follow the written instructions:)
@AdelaideWalkerWool
@AdelaideWalkerWool 2 жыл бұрын
Glad it helped Jane
@alisonbeaty9642
@alisonbeaty9642 2 жыл бұрын
Thank you for the video. Definitely helped me put mine together. Now to learn how to spin! 😁
@lgassin
@lgassin 4 жыл бұрын
Thank you for this. The instructions from Ashford were pretty clear, but it sure helped to see someone putting it together as well!
@SusanRitchie
@SusanRitchie 2 жыл бұрын
This has been so helpful, thank you! I've built mine this morning :)
@tessaayers9070
@tessaayers9070 5 жыл бұрын
This is helpful because I am going to be getting my first spinning wheel soon and am getting a kiwi 3
@ImGinaMarie
@ImGinaMarie 3 жыл бұрын
I just got mine today!!
@tonnasaunders1980
@tonnasaunders1980 2 жыл бұрын
You are a life saver. Thank you for this
@Pludiday
@Pludiday 2 жыл бұрын
Thank you for your help !
@CapoKevin100
@CapoKevin100 2 жыл бұрын
thank you - a very helpful video
@jancy1609
@jancy1609 2 жыл бұрын
Thankyou, it was very helpful :)
@borgiawasem385
@borgiawasem385 4 ай бұрын
Thank you so much! Whew!!
@AdelaideWalkerWool
@AdelaideWalkerWool 4 ай бұрын
Glad it was useful!
@BigTummyAche
@BigTummyAche 9 ай бұрын
You da best!
@punkindoolittle
@punkindoolittle 3 ай бұрын
For some reason my lazy Kate is too close to my wheel and the bobbins don’t slide in easy at all. Not sure what I’ve done wrong and I have no left over parts. 😢
@AdelaideWalkerWool
@AdelaideWalkerWool 3 ай бұрын
It sounds like you have the base on the wrong way round - see the video at around 15:00. You'll need to remove this from the upright, rotate it and re-attach.
@punkindoolittle
@punkindoolittle 3 ай бұрын
@@AdelaideWalkerWoolthat fixed it! Thanks sooo much ❤️
@rebeccadees2300
@rebeccadees2300 2 жыл бұрын
Are there instructions for applying the lacquer? 🤔
@AdelaideWalkerWool
@AdelaideWalkerWool 2 жыл бұрын
None specific to the Kiwi that I can think of. Lacquering is best done before assembling, then just follow the instructions on the tin.
@lauriesfarm
@lauriesfarm 4 жыл бұрын
It looks like one piece was way darker than all the rest... curious.
@AdelaideWalkerWool
@AdelaideWalkerWool 4 жыл бұрын
Hi Laurie, this will be because wood is a natural material and although it's all the same type of wood the shade may vary from piece to piece. I didn't notice to be honest.
@russellayton6408
@russellayton6408 4 жыл бұрын
@@AdelaideWalkerWool Yes, wood parts that aren't for actual custom pieces completed in one project, are made in big batches. Then you grab what you need for each kit at some point later in the processing where you most likely have stockpiles of parts. As you said, wood is natural and varies. Also, I will thank you for the video now. I just received one of these for my wife and I look forward to a little guidance as I put it together today.
Ashford Traveller 3 Spinning Wheel Assembly
42:55
Adelaide Walker
Рет қаралды 1,3 М.
Q&A while I spin some yarn on my Ashford Kiwi 3 wheel!
51:09
brookwillow knit
Рет қаралды 7 М.
버블티로 부자 구별하는법4
00:11
진영민yeongmin
Рет қаралды 28 МЛН
Smart Sigma Kid #funny #sigma
00:14
CRAZY GREAPA
Рет қаралды 88 МЛН
Ashford Traditional Spinning Wheel Assembly
38:30
Adelaide Walker
Рет қаралды 2,4 М.
Learn to Spin Fiber
28:07
Rehash Fiber
Рет қаралды 19 М.
How to assemble Ashford Kiwi 3 folding spinning wheel
35:04
Create With Fibre
Рет қаралды 9 М.
Ashford Table Loom Assembly Part 2 (steps 11-20)
35:40
Adelaide Walker
Рет қаралды 7 М.
HOW TO MAKE A SPINNING WHEEL
52:12
Bobbin Boy
Рет қаралды 28 М.
Restoring a vintage Ashford Traditional Spinning Wheel
12:52
Tiny Fibre Studio
Рет қаралды 4,5 М.
Spinning Wheel Review for Handspinners - Ashford Kiwi 2
8:26
Feathertail Fiber Arts
Рет қаралды 6 М.
Double Drive Spinning Wheel Setup
18:23
JillianEve
Рет қаралды 82 М.
Assembly Tutorial : Spinning Wheel Complete Kit
24:18
Good and Basic
Рет қаралды 11 М.
버블티로 부자 구별하는법4
00:11
진영민yeongmin
Рет қаралды 28 МЛН