Ask away! We want to know what you want to know!

[@matta9316]

Do a video on room treatment and your findings / recommendations; particularly ceiling treatment best practices would be awesome

[@HomeTheatreEngineering]

We are definitely working on that

[@Cashyonyt]

I'd love you guys to do a "What you would build" in set budgets. Like $5k, $10k, $20k, $50k and unlimited. Why you pick each part and what sacrifices you make and why for future proofing.

[@HomeTheatreEngineering]

Ok will consider that. Given projectors start at about $4-5k (aus) doing a room under $20k is very tough but let’s see what we can do with this.. it might be a while though :-)

[@michelegrassi3492]

I'd like you to explain how to do a good subwoofer setup. Thank you 🙂

[@HomeTheatreEngineering]

We are working on that...

[@wakawaka12320]

A video other basics of acoustic treatment would be good

[@HomeTheatreEngineering]

Working on it !

[@michaelslocumbsr.2286]

Sir! If someone has a 16ch processor and 20speakers to include Sub's. Can an XLR splitter be used to create additional channels/out put to accommodate for the lack processing channels?

[@HomeTheatreEngineering]

You can but you need to be aware of limitations. They are extra outputs but not extra channels. In other words they are duplicate signals but being sent to different locations. This can be problematic if you are doing any room auto eq or calibration. Our normal practice in this case is to use one output for Sat 4 subs. Run the output to a mini dsp and setup the 4 subs with the mini dsp first so they act as one. Then calibrate the room. This works well

[@michaelslocumbsr.2286]

@@HomeTheatreEngineering Yes sir! The plan is to utilize the Mini DSP HD 2x4 for the Subs... However, utilize a XLR parallel line splitter for speakers.

[@HomeTheatreEngineering]

@@michaelslocumbsr.2286 Yes so again you need to be careful. I don’t have enough information. Which channels do you plan to duplicate? Where will they be located? What type of processor and what type of room correction? How is there room designed how many seats? We have used xlr spkitters for second row surrounds (not front wides or as discrete channels) but disconnect those 2nd outputs during calibration. Hope this helps.

[@michaelslocumbsr.2286]

@@HomeTheatreEngineering Yes sir! Understood! Thank you!

[@bryanp4827]

Andrew, I'd LOVE it if you boys can do a review of the INCREDIBLE LG HU810?! in recent years, I've been disappointed with 4k dlp projectors, but this thing is game changer, so much so that I bought one! They do take a bit of setting up to get right, but when you do, they compete more with Sony and JVC, instead of Epson...👍👍

[@HomeTheatreEngineering]

We would love to. We just dont have the funds to buy units to test and companies dont send us units to test. We can reach out to LG and see what they say.. will keep you posted (and if you want to push LG to send us one to review that can only help :-)

[@bryanp4827]

​@@HomeTheatreEngineering i can give it a try!🤞🤞

[@TerminatorJuice]

FYI, you spell theater different than we do in the US... I sent an email and it failed because I didn't type it theatre

[@HomeTheatreEngineering]

True. We had to pick one and e we started as a local business so the Traditional English version was used! Got your email will reply very soon