My Pedalboard Gets The Xact Tone Solutions Makeover - Ask Zac 181

  Рет қаралды 25,221

Ask Zac

Ask Zac

Күн бұрын

To Support the Channel:
Patreon / askzac
Tip jar: paypal.me/AskZac
Venmo @AskZac
Or check out my store for merch - my-store-be024...
For years I have had pedalboard envy. Not for a huge board with tons of effects, but for the super clean and buttoned-up look of the pro-built boards. Xact Tone Solutions has built my favorites, so I finally decided to have a larger board built around a UA Dream 65 amp modeler, yet that could also go to an amp, or both. I also decided to get the XTS treatment on my tried and true grab-go board. This is a walk-through of my board with Barry and Eric, who have no issues with adding their valuable input or giving me a hard time.
Gear used:
Turbo Tuner, Mirage Compressor, Analogman Boss TR-2, Ibanez Mostortion rehoused by XTS, Boss DM-3 analog delay, Line 6 Echo Park. Mono board. Truetone CS6 power supply
#askzac #pedalboard #Xacttonesolutions

Пікірлер: 61
@randyrich2039
@randyrich2039 10 ай бұрын
Pedal boards have come a long way from when I lived in Nashville and toured with Ed Bruce (circa early to mid 80's). Prior to that I didn't need a pedal board, I was in night club house bands working 5 nights week for at least 1 year, up to 5 years at a stint. But having the pedals on a board was the solution for a fast setup in touring, and especially the Opry, when we had about 30 seconds to be ready for the count off (live radio back then). There were no pedal boards you could buy unless you had an amp tech make you one (if you could find one that would), or you got one of those Boss plastic gadgets. So you made your own. I cut a piece of 1/4" plywood to fit inside an Anvil briefcase, painted it black, and mounted the pedals and power supply on it. I used all Boss pedals then, compressor, overdrive, chorus, and delay (required to replicate the guitar sounds on Ed's recordings). And a TU12 with a DOD AB box that routed the guitar to the tuner A, then B through the pedals (so the tuner was out of the loop, it also was a good standby for changing guitars, and those tuners made a nasty noise when they were inline. I didn't like the Boss plastic pedal boards that were available back then, and I shortened the long wire on the Boss power supply and used a good extension cord to get AC to the board, because people step all over your cords. It worked great, no problems, not even airport luggage handlers could wreck it. To mount the pedals I used the same size plate screws Boss used but longer to go through the board, so the pedals were screwed to the board, only the tuner and the power supply had Velcro. The good old days, HA HA. When pedals were screwed to plywood. Mamas Don't Let Your Cowboys Grow Up To Be Babies. RIP Ed Bruce.
@shanerhodes6798
@shanerhodes6798 10 ай бұрын
Hey Zac.. This is my first response to your channel, but been a faithful viewer for years now. we're kindred spirits. I'm fixin to turn 51 & been a tele guy for most of my life. I played guitar in a very popular local band through the early 2000's & got the chance to open for several national acts in my area of western NC. I remember opening for Lee Roy Parnell & checking out his rig, as we do. I have a TS10 & remember seeing a pedal on his board I didn't recognize, but looked allot like my old TS10 but with more knobs. I never forgot that pedal & his tone that night. Funny you mentioned Lee Roy on this episode. He was a cool guy to work with on that gig.
@les047
@les047 10 ай бұрын
Untapped potential - Barry and XTS having their own KZbin page with this great content.
@hughscully
@hughscully 7 ай бұрын
Hey Zac, thanks for this video. I built a small board too. I watched your Jon Leventhal talk and heard you guys talking about the Line 6 delay and picked one up on Reverb. I was getting a high pitched squeal. I thought it was a defective pedal but at the end of this video they mentioned that the isolated outputs on the power supply prevent a squeal from the delay! Bingo. I had been splitting one of the outputs for a looper while practicing. I just moved that split to the tuner on the other side and that fixed it. So thanks again for sharing your experience at XTS. You really helped me out.
@stratjed
@stratjed 10 ай бұрын
As a slightly older guitar player. Just want to say that pedal board is so mature and nice Zack. The six-pedal strait line board is "the" board. Tuna>Comp>OD>Mod>delay. Option to double up one.
@78tag
@78tag 10 ай бұрын
The clean nature of a pedalboard is what originally drew me to the HELIX unit - along with tall of the I/O options and no need for all of the DI accessories. I do like the way you have done this one.
@frettingitforward
@frettingitforward 4 ай бұрын
Cool content fellas. Dig the team effort discussion 🤘
@TwangThang57
@TwangThang57 9 ай бұрын
Ha, I watched the follow up video with the second pedalboard before seeing this. Was wondering why you put the trem before your drive pedal. Got it!
@BV_Beve
@BV_Beve 10 ай бұрын
XTS, Barry & Eric are the men ! ... & not forgetting Greg !
@xacttone
@xacttone 10 ай бұрын
Too kind!
@adamcherry434
@adamcherry434 10 ай бұрын
G’day Zac Luv the p/ board vid . I had a double board with pedals behind , complicated, and you put spare pedals on cos u can. Then I got my grinder out and cut the second top half off and just got similar what you got - TC 3 tuner , compressor , boss SD overdrive from the 80’s, boss Wass craft tremolo and boss dd7 delay. One straight line , option paralysis gone, True Tone power supply underneath - luv it. When’s the episode on top loaders. Get a lot of comments on the amp schematic t shirt . Twang on.
@telecasterbear
@telecasterbear 10 ай бұрын
A field trip with Zac. Oh boy. I have owned less than ten pedals since 1975. I currently own one. It is a Visual Sound - Open Road.
@AskZac
@AskZac 10 ай бұрын
That's a killer pedal
@fixpedalboards1969
@fixpedalboards1969 10 ай бұрын
Xact Tone are the best in the biz! You might find someone with equal skills but no one better. Awesome board! The only thing missing are some Fix accessories🤣
@AdamWellsMusic
@AdamWellsMusic 10 ай бұрын
Looks great. I’ve taken some inspiration from your earlier videos about your board. Guess I’ve got to step up. Hope you’re doing well!
@johncox2552
@johncox2552 10 ай бұрын
My first pedalboard was modeled after another Zack,… Zack Wylde. 1/4 inch plywood and I think it weighed in at 20lbs!!! I have since lightened the load a bit. 😂
@DWinegarden2
@DWinegarden2 10 ай бұрын
Love the Mirage pedal. I’ve had one for years.
@AskZac
@AskZac 10 ай бұрын
The best!
@bjorntannberg1581
@bjorntannberg1581 10 ай бұрын
Yes, Dual Lock is what you want!
@danielmakesnoise
@danielmakesnoise 10 ай бұрын
FX Engineering love! I have a bunch of custom one-off pedals from Montez, plus a Mirage or two. Currently mainly using two of his clean boosts stacked on one super stripped down board.
@worldgonewrong2049
@worldgonewrong2049 10 ай бұрын
Looks strong, clean and compact. Nice work!
@AskZac
@AskZac 10 ай бұрын
Thanks!
@kiragina.7152
@kiragina.7152 10 ай бұрын
My 'pedalboard' : Left side of Truetone VS-XO into Source Audio Vertigo tremolo into right side of VS-XO, usually set to clean boost. I have run the trem into dirt, also a cool sound. I don't think Hank done it that way.
@elbowjames7625
@elbowjames7625 10 ай бұрын
I just copied your board setup... not the pedals, I have my own quirks in that department, but the board, power supply and cables - that's really prime stuff.
@ThatHuskyisCrazy
@ThatHuskyisCrazy 10 ай бұрын
I kind of like Buckethead’s approach. He just had pedals all over the floor.
@alexgowland
@alexgowland 10 ай бұрын
Nice rig Zac
@nicko6710
@nicko6710 10 ай бұрын
Sonic Research are one of the best. They need a bit more props.
@KTSAdventures
@KTSAdventures 10 ай бұрын
Zack would it be more appropriately called Little John?” Given the size….lol.
@AskZac
@AskZac 10 ай бұрын
HA!
@7171jay
@7171jay 10 ай бұрын
That shirt is amazing on camera! ;)
@TheGreensideProject
@TheGreensideProject 10 ай бұрын
The trem into dirt chain is great when you get used to it. I also shamelessly ripped off Mr. Leventhal, and my trem sounds lush going into my lightly driven Nobels. (Also when I've had my supro Trem on the board, the dirt has moderated the noise floor/bass boost on my behalf).
@StevenRoby
@StevenRoby 10 ай бұрын
Zac, I need to ask the obvious question here. How much does XTS charge for this service of a pedal board of this size?
@AskZac
@AskZac 10 ай бұрын
Barry said: “Pricing varies a great deal based on rig specifics, but for something this size, where you’re bringing all the pedals, the pedalboard, and power supply,
@StevenRoby
@StevenRoby 10 ай бұрын
Thank you!@@AskZac
@Andyanddiana467
@Andyanddiana467 10 ай бұрын
The Boss delay - is it easy to get to with your foot on the fly? Seems like a tight fit between the Mostortion and the Line 6.
@AskZac
@AskZac 10 ай бұрын
Easy to hit. Big footswitch
@THEItchybruddah
@THEItchybruddah 10 ай бұрын
Like I seem to say EVERY time… “As always…” you find a way to “useful” way to set fire to some cash! 😂 Seriously tho, those guys have been on my radar for many moons. (The “Uncle Larry’s hearing test” was both informative and jaw dropping for LOTS of reasons. ) Regarding Leventhal: Talk about a star to guide your ship by!! For my money Lauderdale’s “Planet Of Love” is THE “Encyclopedia of Bakersfield” and more. I can’t begin to count the things I’ve “borrowed” from that guy over the years. And, as always… THANK you for the useful data and hard won insights that help guide us all to a smoother road on this twangy journey!
@AskZac
@AskZac 10 ай бұрын
You are so welcome, and "Planet" changed my life too. Love that and "The Wheel."
@stratjed
@stratjed 10 ай бұрын
@@AskZac "The Wheel" Great Garcia/Hunter tune.
@jasonkirkham550
@jasonkirkham550 10 ай бұрын
Super cool !
@JCYoo
@JCYoo 10 ай бұрын
Loved it.
@christopherguzzi1316
@christopherguzzi1316 10 ай бұрын
No Fuzz, how are you going to play Spirit in the Sky???😉
@Rigel7WasAlreadyUsed
@Rigel7WasAlreadyUsed 10 ай бұрын
I'm trying to build smaller boards lately. But I have way too many pedals in general and I feel bad if I leave one out.
@Rigel7WasAlreadyUsed
@Rigel7WasAlreadyUsed 10 ай бұрын
Also, every once in a while I think about replacing my Echo Park with a "better" delay... and then I see you and Tim Pierce using one and abort the mission.
@AskZac
@AskZac 10 ай бұрын
It’s a great pedal
@SafeHandsProductions
@SafeHandsProductions 10 ай бұрын
💗☺👍 - Good wholesome friendly Guitar job nerdery - love it to bits - please please keep going ☺👍
@AskZac
@AskZac 10 ай бұрын
Thank you! Will do!
@gregmize01
@gregmize01 10 ай бұрын
Swiss army knife board!!!!
@michaelogden5093
@michaelogden5093 10 ай бұрын
Mine's made from pallet wood.
@jessejacobs3792
@jessejacobs3792 9 ай бұрын
A pedal board that gleams like beskar
@AskZac
@AskZac 9 ай бұрын
Mando board
@mjjames2442
@mjjames2442 10 ай бұрын
How are the pedals attached to mono board? Velcro?
@xacttone
@xacttone 10 ай бұрын
3M Dual Lock
@mjntrax1-pq5eg
@mjntrax1-pq5eg 10 ай бұрын
What did that run for the wiring/cleanup?
@AskZac
@AskZac 10 ай бұрын
Barry said: “Pricing varies a great deal based on rig specifics, but for something this size, where you’re bringing all the pedals, the pedalboard, and power supply,
@Dbj5555555
@Dbj5555555 10 ай бұрын
What cable is that they used?
@xacttone
@xacttone 10 ай бұрын
Mogami 2319
@schrammguitars
@schrammguitars 10 ай бұрын
Is there a specific Dual Lock used? 1"? 1/2"?
@xacttone
@xacttone 10 ай бұрын
We use the 1" variety
@g_and_kikos_studio
@g_and_kikos_studio 10 ай бұрын
Barry was really good to me, getting me out an XTS EQ when my order wouldn't go through and they were very quickly selling out. I made a video on the pedal. kzbin.info/www/bejne/nqSTYYqDpN-nfMU
@smalllicks
@smalllicks 10 ай бұрын
great episode ...
Danocaster Talks Telecaster Tone - Ask Zac 183
32:41
Ask Zac
Рет қаралды 43 М.
What I Take To The Gig - Ask Zac 166
24:22
Ask Zac
Рет қаралды 47 М.
Когда отец одевает ребёнка @JaySharon
00:16
История одного вокалиста
Рет қаралды 7 МЛН
Офицер, я всё объясню
01:00
История одного вокалиста
Рет қаралды 6 МЛН
EXCLUSIVE CONTENT: Time Signatures with Kirky TG
15:24
Time Signatures with Jim Ervin
Рет қаралды 2
Eric Weinstein - Are We On The Brink Of A Revolution? (4K)
3:29:15
Chris Williamson
Рет қаралды 7 МЛН
Small Pedalboard Tips For Pedal Minimalism
10:30
Michael Banfield
Рет қаралды 77 М.
How To PERFECT Your Pedalboard - Tips and Tricks!
9:50
John William Gould
Рет қаралды 532
New Year, New Pedalboard? [Mick Goes Back To ‘Basics’]
1:08:20
That Pedal Show
Рет қаралды 123 М.
Ultra-Nashville Pedalboard
11:24
xacttone
Рет қаралды 15 М.
My 10 Favourite Ways to Use an EQ Pedal
10:58
Michael Banfield
Рет қаралды 194 М.
Don't Make These Pedalboard Mistakes!
33:11
Corey Congilio
Рет қаралды 471 М.