Assembling a Yuxin 17x17x17 Rubik's Cube (17x17 twisty puzzle)(speeded up version)

The Yuxin Huang Long 17x17x17 is available here ► shrsl.com/3b4ao
HKnowStore ► shrsl.com/p76v
Amazon ► amzn.to/2j8CroI
Yuxin Facebook page ► / yuxincube
Yuxin's channel ► / @user-fv4vj3oh5i
Yuxin Twitter ► / 371532248laosha
Music-
Cognative Dissonance - Electronic Medium by Kevin MacLeod is licensed under a Creative Commons Attribution licence
(creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/

[@TonyFisherPuzzles]

Purchased details are given in description.

[@twistitco3966]

Tony Fisher I joined snupps can you follow me @sabrina

[@-jerryg-3872]

Tony you're amazing

[@gpisthebest]

Tony Fisher TONY OMG YOU ACTUALLY DID IT BY THE END OF JANUARY LIKE I SAID YOU WOULD

[@connoragaming6911]

no no more no

[@emelitasabalero4062]

I assembling the 5x5 rubik's cube

[@hiimapop7755]

I'd call it the anti-cheat cube cuz of how long it takes to reassemble it back to it's solved state.

[@rishibeauty8889]

I fell asleep with KZbin playing. When I woke up, this was playing. DAMN, I had to watch the whole thing. I have NO clue how or why it got here. The only thing I can say is WOW!

[@zaclaplant3001]

Bruh... I gotta be prepared to buy a 4x4 when I take mine apart just because there isn't a guarantee that I'll be putting it back together... this is nuts

[@lateefs7229]

Both versions are peaceful but I preferred the long version for some reason

[@cubesolver64]

I don't know how you can assemble a 17x17, my 9x9 cube, every time I try to get the second edge in the first comes out and it's ether the centers holding the edge in are ether to loose that it slides out or to tight that the centers squeeze the edge out. I still have it all in a bag in pieces.

[@TonyFisherPuzzles]

If the parts are dry and not covered in lube (lube stops tape from sticking) use masking tape to hold them in place. Then gradually remove it and reposition elsewhere as you proceed. Also you can tighten the screws, assemble it and untighten them later. If the parts are covered in lube and tightening screws doesn't work, wash the parts in very soapy water to remove the lube, rinse and dry. Then try the masking tape again and lube when assembled.

[@draakisback]

And I though assembling a 5 or 6 was complex. I wonder what a large even layer cube is like given that they usually have those inner middle pieces

[@TonyFisherPuzzles]

I have a 12x12x12 and it's horrible to assemble. I don't currently have the patience to finish it.

[@drygordspellweaver8761]

Did building this give you an idea of how it works?

[@TonyFisherPuzzles]

Yes it's something I always enjoy when making these kind of videos.

[@TheDavidlloydjones]

He says "There are over 1500 parts" in a tone of wonderment. Um, there are 4913 faces, so yeah, there'd better be "over 1500 parts." Or does he perhaps mean "over 1500 kinds of parts"? Kudos to the tool and die makers at Yuxin!

[@alesmasarik4578]

0:13 it looks like lego :D

[@alphatwist2191]

I think most of the price is the assembly so they should sell an unassembled version for like 200 dollars

[@TonyFisherPuzzles]

That's incorrect. Assembly costs almost nothing. An hour or two at Chinese factory rates would be less than $20, probably less than $10.

[@alphatwist2191]

@@TonyFisherPuzzles Oh wow Why does it cost so much then is it the plastic cost

[@TonyFisherPuzzles]

The early stages cost quite a bit. Designing it and doing the CAD work. Getting prototypes made and tested. Sometimes there can be multiple tries. Then there's the many differently shaped pieces and each will require a machined metal mould for the injection moulding. That costs a fortune. Although manpower is cheap if you add all the tasks together like operating the moulding equipment, bringing in the plastic, cleaning the moulds from time to time, retrieving the parts, sorting them. boxing them, moving them, it all adds up. Then there's taxes and the shipping costs and as you say plastic.

[@alphatwist2191]

@@TonyFisherPuzzles Ah thank you I was thinking it was the assembly but it was everything else thank you

[@alphatwist2191]

@@TonyFisherPuzzles Never mind I understand it now lol, I see all the precision made in every piece thanks mate

[@chewswisely7365]

You probably should've Lubed the cube

[@legendgames128]

KZbin is broken, it lists this video as 10 minutes long when it's really 6.

[@DieRagingCat22]

Ahh yes, my favorite brand. YAKSIN

[@TonyFisherPuzzles]

I said Yuxin.

[@DieRagingCat22]

@@TonyFisherPuzzles we usually say it Yu-Shin so it sounded odd for me.

[@connoragaming6911]

I get mad assembling a 3 x 3

[@user-et3ri6xn1m]

Офигеть

[@keilea4149]

OML YUCKSIN

[@TonyFisherPuzzles]

How do you pronounce Paris? The English way (paris) or the correct way (paa-ree)?

[@collinjohnson4581]

Me when I assemble a 4x4

[@noobfromroblox339]

Yeah I’m never getting a 17x17x17

[@cobbsta88]

Probably easier to just solve the thing

[@ThanhDuong-nf8uh]

there are 4913 pieces

[@TonyFisherPuzzles]

There are obviously no where near 4913 pieces. There are 1947.

[@JustAPersonWhoComments]

$10

[@chrisvegaofficial5811]

Nope nope I didn’t even watch the whole thing only up to 1:12 I’m done I love taking stuff apart and putting it back together but this particular item nope nope nope not that one I’ll probably just throw it out if it broke or fell apart lmao 😂

[@CaptainAwsome]

"There are over 1,500 parts" its about 4,900 parts

[@TonyFisherPuzzles]

So maths isn't your strongest subject? There are no where near 4,900 parts. If there was however I am pretty sure that's over 1500.

[@CaptainAwsome]

@@TonyFisherPuzzles I did 17^3 and got 4913

[@TonyFisherPuzzles]

So? It's a 17x17x17 cube puzzle, not an equation. You can see in the video it doesn't have 3375 internal parts.

[@CaptainAwsome]

@@TonyFisherPuzzles wow I'm dumb lol

[@ethanmattern618]

yuh-ksin=yuxin???

[@TonyFisherPuzzles]

Yes, obviously.

[@stup9888]

The way he pronounces yuxin…

[@TonyFisherPuzzles]

The way you pronounce Paris.... Why would you say it that way?

[@stup9888]

@@TonyFisherPuzzles damn sorry lol

[@maciejka1]

if you are watching this: F

[@redkb]

I enjoyed this video a lot!

[@oRevvy]

Hi RedKB

[@d8ug792]

and i was thinking that to your video of assembling a 2x2x4 was awasome...

[@Jack-ff8ri]

I just watched one of ur vids earlier

[@aidanwheeler124]

*Video doesnt record* "Welp, guess i gotta take it apart and put it back together again!" 😂

[@TonyFisherPuzzles]

2 cameras just in case.

[@connoragaming6911]

@@TonyFisherPuzzles yes

[@randomviewer896]

It's cool how you used rubber bands to hold everything together while you were assembling it! Great video, just wish I could afford one of these beasts.

[@jscubes9714]

Holy cow I was frustrated putting together a MoYu 4x4 This looks like a real pain in the butt

[@pyracrys0174]

well he's been reassembling puzzles for fun ( i guess) for years so yeah

[@_Rainbooow]

ye it was that hard that i was forced to buy a new one

[@1Ricov]

Sometimes I do stupid stuff but you are a absolute madman. Keep it coming.

[@appu2664]

I find myself crying when I assemble my 5x5 kek.

[@colosalblack]

A 17x17 ball mod would look amazing. I expect it would also take a long time to make.

[@jacksonfromwisconsin2005]

i say barrel

[@rosebuster]

To be honest it would look the same as a 13x13x13 ball mod, just a bit bigger...

[@bunga9489]

It would also cost a lot of money

[@razelsteer6931]

17x17x17 barrel plz

[@AedanBryant]

it would be crazy to assemble a 16x16 (if they ever make one) due to the internals.

[@aaronmarquez5596]

Tipster Trickster it's why big even layered cubes don't exist

[@kaydamation7082]

What about Corenpuzzle’s 22x22 he had to assemble it

[@alphatwist2191]

@@kaydamation7082 It was made differently than normal otherwise he would have made a 23x23

[@josh116pep]

So how long till the 17x17 ball video 😜

[@valaha]

upvoted.

[@forthehorde6054]

That actually looks pretty fun...

[@pyraminxcuber7814]

Dude you are the best and a great puzzle maker. Keep up the good work.👍🏻

[@SuperJaguar52]

A stop motion oficina these would be mindblowing

[@alessandrocalzolaro6253]

You're insane Tony!

[@dead_frets]

Awesome video! A lot of hard work must have gone into this!

[@gstephane1985]

I really likes your final approach on how you reassembled the last face, really entertaining. Also, the music choice and the angles you shot the video with made me think of the original Tron movie. Now I'm wondering how many pops or sliding pieces you got while reassembling this beast...

[@kerbalcuber124]

Keep up the great Work!,!

[@pizzapm]

this video is okay but i really wished I could see some of the pieces and the different types of pieces up close but its hard to register them in sped up form

[@nicksenske662]

And then it popped as you tightened it.

[@trg618911]

Nick Senske I would buy another one. I'm sure some would buy my disassembled one, on the cheap.

[@willbembrooke6305]

He must have so much patience to do this!! Well done!! 👍

[@RPKGameVids]

Great video, I like the music too!

[@danforbes3573]

Cant wait to see the full length version of the reassembly

[@krisfoward2098]

Mr Tony Fisher could you please, please, please do an assembly video of a Bagua cube? Mine has popped and is in pieces. So many small parts I don't know what to do. I'm sure it would be a piece of cake for you. Please help..! 😣

[@Visurient]

kzbin.info/www/bejne/j2ibdJWnpLajm8k hope it helps

[@aidanwheeler124]

Rip man 😂

[@bigpops74]

Wow. I must admit, I was wondering how many parts there were when I saw it in pieces.

[@cubethesquid3919]

0:14 My soul hurt

[@aidanwheeler124]

I thought when my 5x5 exploded it was bad 😂

[@HulkHoganBrother]

Makes me wonder how they do it at the factory.

[@KLondike5]

Not so ancient Chinese secret

[@aidanwheeler124]

CR Cuber 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂 (did i laugh enough? ;) )

[@genericusername4206]

CaptainChrisKirk nah the yuxin employees actually do it by hand, but they are much faster and efficient than tony

[@hachiumi]

Yuxin is now NOT Trigered

[@creeksidecubing1009]

Not a fan at all of that music, but I hope now that you are intimately acquainted with the mechanism, you have some great transformation ideas!

[@user-er5dq8rw8r]

Please upload the full version just like the moyu 13x13

[@EJ87760]

Awesome video👍

[@matthewyakir4516]

This was so satisfying

[@isaiah.l2815]

OMG CONGRATS!!!

[@digital_shitfest]

Man, you have some great patience, great videos and some amazing puzzl-ing skills,you get subscribe today from me, you rock ! :D This video is so satisfying to watch so...I really enjoyed it!

[@chefcc6784]

Congrats man

[@jacobcubing606]

Why is there a black ball around the core piece?

[@TonyFisherPuzzles]

I added milliput to strengthen it.

[@twistitco3966]

Hi Tony Fisher love your vids

[@zerexgaming3020]

Me when I assemble 1 side: YES FK YEAH

[@sp-k]

Great job! I can’t even put together a 4x4

[@SandalPower]

How much time did you spend reassembling it?

[@dtp0119]

you can probably dissasemble and assemble one faster than you could solve it lol

[@DAMIENDMILLS]

1,538 pieces plus a core. Say you already attached the first 5 center pieces to the core in the beginning, probably take you like 2 minutes. Then say you already have every piece organized so you can find them and assemble them quickly, like maybe take you only 5 seconds to find one and put it in. Now that means it would take you more than 2 hours just to put everything together, and that's not including the time it will take to put the last slice on. Plus how long would it have taken you to organize each and every piece into it's category? Maybe a whole other 2 hours.

[@trg618911]

I bet Kevin Hayes could solve it faster than you can assemble it lol

[@sophiegrey9576]

you can probably thoroughly lose your mind faster than you could disassemble and reassemble one

[@valentinoramirezpapa6887]

this video explains the reason of craziest

[@pukarkhatri]

How many pieces are there??

[@monkehm]

So wait, does this actually ship assembled? For some reason I assumed you had to assemble it yourself, just by virtue of it being such a huge task.

[@aaronmarquez5596]

monkehm yes sir it comes assembled, that's what contributes to the 800$ price

[@AznUzer]

Yes, it comes assembled

[@EastCoastCuber1]

It ships assembled

[@JasperJanssen]

It sure does. Otherwise they’d have to ship so many extra parts for the ones subtly damaged in the molding process..

[@dtp0119]

yes they do, i mean for 700$ i would expect it assembled lol

[@Joe-bb4yi]

"OH I JUST TAKE IT APART AND PUT IT BACK TOGETHER"

[@Psychedelicide]

Bravo!!

[@47Times2]

This is the first time I cried in MacGiver.

[@cvna1059]

will you scramble this?

[@savitakedar6414]

Can you magnetise it ???

[@sy1nx717]

damn the oatient on this thing

[@roger7050mm]

this is insane

[@bjlclashroyale1427]

Huge!!!

[@theawesomer]

Wow. That must have taken forever.

[@maxmulato]

As a factory worker this is hysterical

[@farmaaa__d]

I thought putting my 3x3 back together was hard 😅

[@definetlynotkeech5202]

How long Does it take u reassemble this?in Real Time

[@holySatan03]

With a speed up of times 45, it would roughly be 6 min * 45 = 270 min = 4,5 hours

[@hunterdeardurff4386]

Definetly NotKeecH nice math. 4hours and 30 minutes is not the time however, and you probably already know this. I would think it would be around double this if you count sorting the pieces and messing with strings and rubber bands.

[@genericusername4206]

Hunter Deardurff he made an uncut real time video and it was around 4 hours

[@Malko64]

You're crazy ! But how many pieces are in the cube and how many hours need to assembling it ?

[@TonyFisherPuzzles]

Around 1540. The full length video will be about 3hrs 40 long but it cuts out the sorting of pieces and setting up.

[@Malko64]

Yes that's what I thought, the sorting of parts surely is double the time

[@sabrinalender8922]

15x15 centers=225 pieces, x6 and -6 because centers don’t count is 1344, plus 8 corners is 1352, plus 15x12 for all the edges. 1352+180=1532, so exactly 1532 pieces without centers or internals.

[@echoplayz-minecraft876]

Is that milliput on the core?

[@EliteGaming-ls5jk]

EchoPlayz - Minecraft no just the core

[@TonyFisherPuzzles]

EliteGaming, Please don't answer if you don't know. It is milliput since I wanted to strengthen the core.

[@EliteGaming-ls5jk]

Tony Fisher Jesus

[@ryandecena9098]

This is oddly satisfying...

[@gerardogasquet5846]

Niceeeee!!!!

[@delljordan9279]

How long did it take to reassemble?

[@TwilightNightGaming]

Dell Jordan id say at least a day

[@tylergold6978]

Watch the sped up version 45 times. That’s how long. Edit: actually longer because pauses were removed

[@KLondike5]

So what's the theory on how they put that last face on? A string through that screw hole and around where the band was with some sort of clever slip knot? Some stretchy plastic wrap that would tear out a narrow crevice clean? And people are just thinking about the pieces and the assembly at the factory. The molds must look insane themselves.

[@TonyFisherPuzzles]

I recently saw how they do it. They group pieces together and assemble it like a 5x5x5. I still don't fully understand but it will be far more logical than my approach.

[@wethr]

That would have taken a while but it did not actually look that boring

[@egyptiangodcardproductions5090]

COOL

[@joenodden]

Putting it back together seems just as hard as solving it...

[@vincentkiesel8626]

Kool

[@abhijeetghodgaonkar]

Yay!

[@reyflowers]

In all, how any hours did the reassembly take?

[@valaha]

43 years

[@cvna1059]

by my calculations, about 4.5 (4 and a half)

[@JeviPw]

Wow

[@user-er5dq8rw8r]

Btw you should make a 17x17 ball puzzle

[@joenodden]

Holy crap, that thing is 730 bucks?!?!

[@TonyFisherPuzzles]

No, it's $620.

[@KLondike5]

Savage AF

[@andrewbostian2328]

How

[@pmjithink]

0:25 GEEZ