Assembling Shelfing Units

[@chrisspofford5847]

This guy is happy because his clips actually fit all the way around the bar and snap shut unlike everybody else’s clips which leave a gap!

[@annemacleod1421]

Yes yes!!! That’s why I’m you tubing instructions! Mine has been up 12 years but now rebuilding after moving house!!! 🇳🇿🇳🇿🐑🐑

[@ajjobes12]

I think that is the issue the darn clips do not clip together. Im so frusturated with this Mind Reader 3 tier microwave cart that they will not be getting a good review from me

[@michaelbarriga1107]

That’s exactly why I’m here lol

[@joemekacotton781]

Exactly why I am here 🤦🏾‍♀️

[@jakewilbur4053]

Fucking preach

[@lorettah5395]

Oh my goodness! Apparently I am not the only one going crazy here. The anchor clips that came with my rolling kitchen cart won't even attach to each other around the poles! So much for ending up with a cart that looks like the picture online. The "instructions" are nothing but arrows and pictures--no words, no details... I am going bonkers!

[@odelia216]

Thank you! printed instructions were nearly incomprehensible. This was a huge help.

[@MsPhillyG]

Atleast you got instructions my unit was missing instructions.

[@tinaaltamirano7988]

Can't GET THE PLASTIC PIECES TO FIT AROUND THE POLES!!!!!!🙄🤯😖PLEASE HELP

[@gothickingroachjfs5677]

NOBODY IS SMILING THAT MUCH BUILDING THIS! I LOOKED LIKE I WAS CONSTIPATED AND FROWNED THE WHOLE TIME!!!!

[@Kalamarajj]

Happy to see I’m not the only one that struggled with this basic task.

[@JPTech933]

Have been in storage for 6 years, thank you for the vid and people's great advice!

[@RingshadowCat]

This random-ass video saved me from terrible instructions in a shelf I got from amazon. Thank you.

[@tinaaltamirano7988]

I'm a senior woman no help trying to put this together getting no where!! if I would have know this was SO HARD TO DO THOSE DARN CLIPS!!! won't fit through the round circle on the rack PLEASE HELP

[@MrPhenom444]

Guy who’s building the shelving rack probably has a chill boss lol

[@jimcarey7150]

I remember putting these together. They don't physically, completely meet each other and clip with a seamless view or a clicking noise. Their purpose is to stay in place and will be covered by the shelving unit, they are not meant to completely grasp each other---but I recall having to learn that. Mine stayed together for 22 years between many moves.

[@James-vw9nu]

This build tested my mental stability. God help the creator.

[@me1747]

Sigh. How I wish it was this easy. Like many who have already commented the black clips just slide down as I attempt to slide the shelf over it. A few people had some creative solutions I will try. I have another one of these purchased way back in 2008 and it's been great. Strange to have trouble with this one.

[@videorocketzmillar007milla5]

I've had this 2 months and couldn't figure it out. Thank you so much now I can do it today!

[@chaoticpix93]

Trying to put an Easy Home 53534 and I swear TG these plastic things don't fit on the thing. There's a gap on either side of the clamp. Like, so frustrating.

[@citticat2]

This video is a joke. I just bought one of these shelf units because I was reading all these Home Depot posts about how easy it was to assemble. Are you kidding me? Those anchor clips are a pain because they don't clip property to hold the shelf in place and one pole didn't screw in properly. I thought I wasn't strong enough but it looks like other folks had problems too. She is up and not quite looking like the photo but she feels sturdy enough.

[@rodrigans-roadto1007]

thank you, this video did not only tell me how to assemble my shelving unit, it was also a big help because i had started to put it together and i didnt know what i was doing!!!!! so i searched and found you!!!!! thanks again. also i didn't know that it would be this helpful because some videos like this aren't as clear to how to assemble the things.

[@MainelyLove]

CLIPS TIP : The clips will snap together SNUGLY as long at the smaller ends are lined up with the indent line on the pole. I am putting mine together now and that was not mentioned on the video here, but I am still glad I found this video, very helpful!

[@ScubaShneve]

How do you create anchors (clips) that don't actually fit around the pole and CLIP together, then go, "Yep, ship it!"

[@smallppsam5482]

Exactly bro wtf

[@nancymills1884]

I had the same problem. And when I tried contacting the manufacturer I got no response. Maybe they would like the damn thing piled up in the parking lot.

[@samanthacatcher7838]

Just bought one of these and after watching this, I can confidently say I'm an official idiot...I think it took me over an hour and here, the guy made it look so simple...FML.😥😢

[@Kalamarajj]

Same. Took me fifteen minutes to just try and figure out the instructions

[@samanthacatcher7838]

@@Kalamarajj that's amazing, you did way better than I did on time. After watching this, I bought another one for storage and did it a lot faster than the first. It's funny because I can figure out quicker how to assemble IKEA furniture than this...and IKEA instructions are just pictures...🤷

[@dwightmcvey2265]

Mine went right together in minutes. Put the two clip halves together around the posts facing up. Then slide them down until they snap into the grooves. Mine worked so well, I'll be buying more.

[@emilygalloway4865]

Okay so I had some initial trouble with this, so here's what I learned: 1. The clips aren't meant to completely close 2. It helps to initially put the clip in between the ridges (directly above where you would like the shelf to sit) and then slide the clip down to the ridge where it shouldn't slide anymore 3. If the shelf isn't sliding down easily like the video, turn the shelf upside down but keep the legs as you have them. The final product will have the shelves completely flat, if your shelf has sides facing up like a bowl, you have it upside down. It's hard to explain but if you're having trouble, compare how you have your shelf to the final frame of the video. Hopes this helps someone!

[@ronvd79]

Emily Galloway It was. I had almost given up and beaten the dog before your post. Thank you. The shelves are intact and pupper is safe. 😝

[@Zoielynn]

Emily Galloway I can say, after reading your post, that the clips aren’t made to close, everything made sense. Thank you!!!

[@tinaaltamirano7988]

This SUCKS!!

[@tinaaltamirano7988]

@@Zoielynn how do you get them to slide through the damn poles????

[@elliebradshaw3216]

THIS COMMENT SAVED MY LIFE!!! I had it upside down the entire time! I was about to bitch out the company for sending me a faulty shelf

[@sev6379]

Passing on what I just learned....You don't need the clips to fit together all the way. For those whose clips are falling apart when you slide the poles through the shelf...your shelf is most likely upside down.

[@akilahbee]

You win for best comment. Thanks!

[@jenijordan2558]

Our poles and/or the clips are not upside down. Checked and rechecked several times. It seems the grooves are not deep enough or the ridge on the inside of the clip is not thick enough to stay in the groove. We have tried everything. Shelves are supposed to hold 1000 lbs each but can’t evern stay put when putting pressure on them. Giving up and sending back!

[@pipemanpsp]

Just bought one of these. This video is very helpful.

[@xoxocamb]

This video helped so much. Thank you!

[@SullivanCovers]

This clips are not meant to completely lock. There is a little ring on the half clips. Align that right above the insert on the pole you want to have it at. Lock the claps as best you can and it will slide down around the ring on the pole. It will lock but there will still be a little space. When you put the shelf on it will completely lock it.

[@nancymills1884]

These videos show the clips locking in place. Mine are a good 1/4 inch open. If you can hold the clips, the leg and the shelf - I’d be interested.

[@kgutierrez910]

@@nancymills1884 clips don’t full lock, on mine either. Make sure the shelving unit is not upside down, the unit sleeves are slightly tapered. Someone commented on this and was able to get mine set up.

[@nancymills1884]

@@kgutierrez910 Thanks,after checking out a couple of other videos I finally got the shelves together. Thankfully just about everything is on KZbin and networking with others.

[@goldenmartin2775]

My clips won't lock either and keep popping off the pole. :(

[@SullivanCovers]

@@goldenmartin2775 they aren’t mean to fully lock. Put the shelf on top and then they lock. They don’t fully lock prior to sliding the shelf on

[@spaghettiostan]

Why does this guy look so happy

[@rodrigans-roadto1007]

ikr

[@mellymel1100]

Because he has magic sleeves that go together

[@drmodestoesq]

What I did to make my life not entirely full of frustration was take a stack of milk crates and put the wire shelf upside down on top of them. You can use a high desk or a table saw or whatever. Just so the shelf is like 4 feet off the ground. Then take a the uprights apart so they're two lengths of pipe. Then attach the plastic clips on the four pieces of upright pipe. Then simply slide them into the shelf holes. And of course, they'll sit in the holes and you give them a bit of a yank to secure them. Then take the section of shelf and flip it over and start building. Easy peasy, quick and easy. Trying to slide a full length of pipe into the holes with a single shelf turned sideways looks like mi-ser-eeeee.

[@NoName-rn2yu]

This may help: If you look closely at the poles, there are occasional notches that are wider than the others. Make sure the clamp is oriented properly (top arrow) and place it below this notch. Then slide the clamp upward and you should feel it stop. From here I was able to seemlessly slide the shelves down without the clamp moving. Hope this helps!

[@lilyhart9602]

Yes! It worked! 🙏🏼🙌🏼

[@jacobwenzka]

Oh my gosh, thank you!! I was having all kinds of trouble until I read this comment. They really should put something about this in the instructions!!

[@jlemaire4970]

We had to use two hammers on each side of the spacer and shelf hole to push the spacer in tight enough.by hitting both hammers toward each other. It finally got tight enough because prior to that they were slippin down the pole. It took us well over an hour to assemble.

[@hedstrom100]

I've struggled with this for close to 2 hours. I've finally got the bottom shelf on. Trick was you had to stick the bars with the clips inside the shelf first, otherwise they fall off. At least for me they do. Still not sure I've got it, but I'm going to keep going.

[@MikeStavola]

this would be great if the plastic wedges, or "anchors" didn't always slide down unless a clamp is applied to the poles and the shelf is hammered down onto them.

[@ms.anonymousinformer242]

When I hammer the shelf down (mallet ) those clips just slide further down! 🤬🤬🤬

[@MsStarryEyed]

I finally got mine to work! (Long comment alert). I had the issue of the black clips not closing around the poles like everyone else, and my shelves couldn’t fully slide down over them to set, even after using a hammer. (My clips were both Top-side up, and my shelves were correctly upright as well, so I didn’t know why I still was having an issue!) Then I found comments elsewhere about how the poles have double-rings/grooves in some spots (look closer at your poles to find them). And that the double-rings don’t work as well for aligning the clips? Since they’re supposedly not as deep of a groove as the single rings? And the comment said to slide your clips to a single-ring spot. That helped some people. But what really helped me was a comment saying to find that single-ring spot and slide only ONE of the clips down on the pole to place it until you hear a click! And THEN add the other clip! (No sliding down needed for the second clip). My clips still didn’t perfectly close together BUT they closed a lot more than before! Enough for me to successfully get the shelves to slide over them! And since it was just me assembling them, I did the middle and top shelves while having the unit/poles standing upright and had to lower my shelves slowly and making sure they all dropped smoothly and evenly. Then I tapped twice with a hammer and it worked! The shelves definitely didn’t lock down before I did this! Hope this helps!!

[@ephraimlatson]

I don't think you will ever truly understand what you mean to me right now! My anger was reaching code red levels..... And than i found ya comment. Bless you😂😂

[@alaina110881]

Thank you so much!

[@molywend2378]

The clips are a very poor design and make assembly frustrating, difficult, and imprecise.

[@terriendicott6864]

Totally agree. These shelves are ridiculous. I still have not gotten them together and I refuse to buy a mallet to do it.

[@chaoticpix93]

what does that even mean?

[@jayliche3266]

It actually helped a lot It can’t really get any simpler than this It’s a great shelf

[@Deangirl86]

KingJayyzWorld really? The clips don’t even go all the way around the poles, so they slip when any pressure is applied.

[@jayliche3266]

Dean Girl You might have something upside down That was my whole problem

[@rositamorales3567]

Loved thank you , I did great job watching you

[@balanced-living]

I feel like this is very well researched business solution to make people call for assistance instead of making it easier for them to assemble

[@maryammaryam6627]

Merci beaucoup. Cette vidéo m'a beaucoup aidé

[@livp9056]

this video is a life savor!!!

[@lucygray6162]

Have spent an hour just trying to get one blasted shelf over the anchors which do not close. Apparently the manufacturers just don't care.

[@ssap620]

Like everyone else my clips did not fit around the pole so I wrapped painters tape around each clip. That did the trick!

[@laurabentley7121]

I have older anchors and they do not say up and it is a guessing game putting together every few years when I pull them apart and move to another room.

[@cherylvantil6918]

I just spent 1 1/2 hours trying to assemble my 3-Tier Wire Shelving Unit. I can successfully clip the clips on the poles; but the shelving holes are too big and the two won't tighten. =(

[@tikiyahbanks4392]

Thank you your video was super helpful. The small circle's that supposed to be on each pole didn't work. But it's really sturdy without it...🤞🏿🤞🏿🤞🏿😁😁

[@damarsmith7691]

This product worked well for me. Where can I buy more clamps?

[@manuelmelchizedek4309]

Took two attempts the third time successfully done .you saved me .

[@j.michaelkafes4684]

I just bought 4 shelf racks and they came snapped together. I've been trying to pull them apart but am not having success. Am I physically weak or is there a knack to separating the shelf racks?

[@philfrank5601]

IMPORTANT: the clips have an arrow on them and MUST be ponting UP on the leg. If not, the clip may not snap on the leg, and definitely won't allow the upper shelf to slide on. If you can't see the arrow, just flip the plastic snap amd check again. There is a small groove that the plastic clip must fit into on the leg or it won't fit. Take your time, it will go back together. Forcing it will snap the clip and you'll be hooped.

[@kaitlyncleary3424]

I find the tapered locks are uneven because they don't connect fully on each side of the lock.

[@Smokyburnowt]

Can you make a video about installing the ALESW590004 wheel kit for these shelving units?

[@nikkididthat1604]

That’s video was helpful. I was building while he was talking.

[@bulletproofbubbles6915]

Do I have to smile the whole time

[@annejohnson3327]

Yes, its the only way it will work!

[@bigal25938]

Can it be assembled with the shelves flipped over? I like the side rails to be on top of the shelves instead of underneath.

[@TracyAllenVideos]

Hey… How did he make that first leg stand up on its own to put the anchor on in the first 20 seconds? 😆

[@fredrickschanky2570]

Where can I find those “S” hooks you use to connect two shelving units? Also what are the correct term for those?

[@powerchooms2025]

Thank you your the best

[@viniciusscarsetto1147]

It helped me a lot

[@SoulfulNaomi]

Thank you!!!

[@nightdonutstudio]

This product is very good. I can adjust how tall of each shelf to be.

[@marieryan7724]

Was having problems with the first shelf and realized I had it upside down, ridge is supposed to be down. Once I figured that out it was easy peasy.

[@donnastarkey7619]

wonder if you can buy the plastic anchors separately

[@wdp519]

At 1st it seemed that I was going to have the same issues with the clips actually not snapping together. After getting the 1st shelf in place I noticed that it was most definitely a tough fit over the clips. Nope, not going to work! Even trialed on of the clips that snapped together (albeit) not on the poles and once again tried to insert it in the shelf. Once again, not going to work! Then I flipped the shelf in the correct direction since I was hoping that upside down the shelf upright will help things not falling off. And what do you know, it slide right on.

[@curiousandlooking]

Can I Combine2 small units to make one tall unit using the threaded screws?

[@mariiferchaavez8342]

Someone knows where I can get those black clips, I bought the furniture but I didn't come the clips

[@ontan3398]

What is this exact shelf called? What brand is it?

[@fallenslave6684]

What is the speciffic name of that shelf? And where can I buy it?

[@jmontoya1677]

What are all the extra black rings that came in the box. They are not even listed on the parts list

[@nidhis5253]

Thankyou so much for your help

[@jcgongavoe337]

I tried to install the Finnhomy Heavy Duty 7 Tier Wire Shelving, the shelf rack just won't fit into every single clips, I tried to use my body weight, mallet hammering and the rack was just not able to insert into those clips, after 2 racks are bent with sheer force, I thought enought was enough and returned it.

[@ellenlee9390]

Good advice

[@EJAZenarosa]

Thank you.

[@rbshk7298]

how can it handle weight if the top or middle is heaviest..., what make it not slip down?

[@HackMyControlSystem]

By far, the most heinous shelves I have assembled. Steer clear of HDX products.

[@detodoconeloanri5987]

Buen video muchas gracias

[@purenkool2011]

Thank You! 🤓

[@graysonorsburn6085]

the anchors are too small and i cant get them to clasp or go into the shelf hole! what ca i do!

[@daviddrake8867]

The double threaded nuts between the vertical posts don't properly thread into the posts. I can't find the actual support line for HollyHome. Any advice??

[@TheEgg185]

i think these shelves are the greatest invention ever.

[@gyij3876]

Weight it can handle?

[@Al_Baluci]

Thanks for this video.

[@reapwhatusow]

Make sure the flat side of the shelf is up, which for a home isn't ideal, imo. Once I corrected the shelf direction the black clips stopped popping off.

[@ms.anonymousinformer242]

Im so aggrivated because I feel like I am placing those black clips on correctly. But when I lower the shelf on them it just pushes the plastix peices down down until they break a part or the shelf just ends up completely uneven be ause the black peices are pushed down :-( . I threw away the packaging material and it may be too late to return this to home depo. Im very unhappy .

[@user-se1mm2sm3w]

how you take it apart?

[@karenstandefer1]

I got one shelf on and none of the others will fit. they won't come down over the clips that do not close all the way and allow the post hole to fit over it.

[@DebbiesWorld]

Where do I get the s hooks?

[@SHOWMEREAL]

my wife and i almost went through a divorce trying to put those clips on

[@leahnagorny7234]

How the heck is your top shelf level with the posts and the image shows its level, but the clips don't attach that high???

[@washingtonotters7816]

My dad built me my shelf and took it apart when I moved.... I’m trying to rebuild it but the plastic anchors don’t clip!! Please help

[@haticegul3769]

Thank you so much

[@christelletchety6022]

Thank you

[@neerfa922]

IF YOURE HAVING TROUBLE WITH THE CLIPS AND SHELF SLIDING DOWN, TURN THE SHELF UPSIDE DOWN. ITS NOT MEANT TO BE LIKE A BASKET. THE SHELF SHOULD BE COMPLETELY FLAT. THAT SHOULD HELP!!!

[@grandwonder5858]

Now, how do you disassemble the shelf?

[@thushanishashikalailesingh4268]

From where can I buy these shelves please?

[@Ah1My-Spinach-Puffs1]

I had extra pieces in mine idk what to do with?

[@midnightmystery544]

The clips are too small to go around the pole. Like WTF? I tried using players to force them in place and the other side just pops out. Should've just given us pre aligned holes with wingnuts.

[@lindabuckler3581]

Does any one know how to use Over the bathroom sink shelf

[@teresahyk-knutson6498]

The plastic anchors do not stay in place!!! Does anyone have any tips for this?

[@elardosiblings8714]

Thank u 😊

[@purenkool2011]

So one can make 2 shelves out of a 4-5 shelf unit, right? Just asking for a friend…🤓

[@rakshitharajasekhara4819]

Can I when where can I order this

[@alexismonochrome4175]

Your comment totally cracked me up! I agree! 🤣🤣🤣🤣

[@whydopeoplealwayssayuhm]

this is ridiculous. none of my anchor clips wrap around the poles... when i place the shelf in, the clips pop right out... wtf

[@ernalinadeguzman1349]

Can i buy plastic anchor in a hardware?

[@superk734]

call the company and request them

[@kevinherlihy9471]

Those black two piece anchors DO NOT slide through that easily on mine. 😢

[@kevinherlihy9471]

Okay! Two things. First. Take a close look at those black half moon clips that we are bitching about. One side says “UP” or “TOP”….guess where that goes! Another is slide it up the pole until you feel it “click” into place. Count the rings or use a tape measure. You want them even. Guess what…it works now. My instructions, in three languages, never mentioned any of that. Good luck!