Dumbo Rc DDF-350 Radio: Software Update

[@R-EVLMNKY]

I checked my version and it’s already running 1.0.9 and I got mine for almost 7 months now. Got lucky because I will have a hard time updating it for sure 🤭😆

[@ooze1016]

This is months later, I saw this video before mine arrived, and it came with the updated version.

[@DanPRC]

@@ooze1016 OK. And it changed again since I did this video. That’s how software works, it gets updates. Another update came out this week. So if you buy a radio today, it’ll have an even newer update.

[@ooze1016]

@@DanPRC thanks for the info

[@takingastepback83]

Do you have any instructions on how to update the DDF 350 after downloading the firmware?

[@TheMitsosBlog]

Thank you very much. Can you use Channel 6 as a throttle limiter? So you can give the RC to a child.

[@kalimahhh]

Hi, the last firmware v1.1.5 is no longer available on the chinense support site. could you please share it somewhere with us?

[@Marek650]

Can I downgrade firmware from 1.1.1 back to 1.0.9? I think there is the problem after upgrade firmware. Sometimes signal losses to receiver but in range of 5-10 metres.

[@tomv3361]

Oh thanks! I'd never know the chinese version of the website may be different.

[@chuzzwade288]

Very useful to download it but how do I install onto my transmitter (via my Mac)?

[@ACE1932DIECAST]

Can any tell me if I can mix the controls for a tranz brake

[@DanPRC]

@@ACE1932DIECAST Yes. It was mix presets for tanks and for servos. You can use the one for servos and set the endpoints to where you need them. The servo mix works with channels 3 and 4.

[@charlesthompson1026]

Mine came updated because i have the cruise control set up to channel 10 click it then i use channel 6 to adjust the cruise control click 10 again and it shuts it off cant control regular throttle while in cruise

[@markgreenhalgh8344]

Got mine about 3 months ago and it came with the latest update. Not been any since and probably won't be

[@DanPRC]

I am / was hoping for more internal space for more models. I like everything about it except its limited capacity.

[@markgreenhalgh8344]

@@DanPRC yeah would have been nice to have a 20 car memory but for the money its a soild unit really.

[@enigmqtikcs]

Thank's! ✌️

[@neoliu1457]

my pc doesn't recognize the transmitter as a hard drive

[@Aloueth]

same for me (W11 pro), have you solved ?

[@TheDepep1]

What do i do after i download it?

[@McGoooo420]

anyone know how to set the failsafe?

[@maxkez83]

How do you turn the steering speed down

[@DanPRC]

I haven’t tried but I guess you can do that with the steering curve menu.

[@maxkez83]

I’ve tried it pal can’t seem to get it right.

[@tomv3361]

What do you mean by steering speed, just turn the wheel slower lol

[@maxkez83]

It’s not me it’s my lad so it’s all or nothing 😂

[@nic.25]

You can adjust on steering curved menu

[@Qriz78]

But firmware is "hardware" and yours is set to 1.0.0. Your software is updated to 1.1.1. You sure this is correct?

[@DanPRC]

@@Qriz78 Software is not hardware. Hardware is the physical parts. That’s the word HARD in it. Software is the operating system. Like updating your phone or gaming system.

[@themountain59]

already a new firmware available ;)

[@DanPRC]

@@themountain59 What did they add now?

[@KeepRubberSideDown]

@@DanPRCI can’t get this to work on windows 11