Making perfect Watch strap with Hermes Alligator leather. 에르메스식 시계스트랩 만들기(TCIM엘리게이터)

[@BilalPalasara-gw7gu]

There is magic in your hands. Great work .

[@AtelierSANGBLEU]

Thanks a lot 🙏🏻🤗

[@FearlessFrank1]

Great work!! You are TALENTED.

[@AtelierSANGBLEU]

Thank you so much :)

[@gshockbabe6144]

Oooooh!Aaaaaaah!😮😮😮😮😮😮😮😮Superb work!My wrist and my watches really appreciate the work that craftsmen like you do.

[@AtelierSANGBLEU]

Thanks a lot!🤗🙏🏻

[@Heywoodthepeckerwood]

Beautiful. Nice work.

[@AtelierSANGBLEU]

Thank you :)

[@momiland7673]

Wow perfect work!!! 👍👍👍

[@AtelierSANGBLEU]

Thanks a lot!!! 🤗

[@시연진-r2l]

우연히 들어왔는데 정말 에르메스 제작 과정이랑 똑같네요 ㅋㅋㅋㅋ 원래 만들 때 목소리 들어가는 걸 선호했었는데 이런 잔잔한 클래식에 제작 소리만 들어가는 것도 너무 좋네요 ㅎㅎ 실력도 대단하세요!! 구독하고 갑니다 ㅎㅎ

[@AtelierSANGBLEU]

구독도 해주시고, 좋게봐주시니 너무 감사드립니다ㅠㅠ🙏🏻🙏🏻🙏🏻 앞으로 더 좋은 작업들 열심히 들고오겠습니다! 😉😉😉

[@언제든날개를펼치도록]

이번꺼 장난없넹~👍

[@AtelierSANGBLEU]

리복 덕분에👍🏻👍🏻👍🏻

[@waies78]

시계도 예뻐요😊

[@AtelierSANGBLEU]

감사합니다! :)

[@donghyunlee8883]

와…최근들어 봤던 가죽영상중에 탑입니다 많이 배워갑니다잇!!!!

[@AtelierSANGBLEU]

아휴, 과찬이십니다 🙏🏻😭 댓글도 감사한데 이런 최고의 칭찬이라니, 앞으로 더 열심히 해보겠습니다😊 정말 감사합니다!🙏🏻

[@donghyunlee8883]

직접 배우고싶슴다…ㅋㅋㅋ 화이팅입니다!

[@joshuacarmenatte9606]

This was incredible.

[@AtelierSANGBLEU]

Thanks a lot!

[@gyuhyeon0]

뭔가.. 프콘 본체보다 더 비쌀 것 같은 가죽 줄입니다. ㅎㅎㅎ 저도 나중에 제 시계와 어울릴만한 시곗줄 하나 직접 만들어 보고 싶네요.

[@AtelierSANGBLEU]

예쁘게 봐주셔서 감사합니다 :) 음... 저희는 가끔 제작하지만 요즘은... 작은 물건일수록 제작하기가 까다롭기 때문에... 돈으로 사시는게 최고입니다🥹

[@nicolasquil7476]

Hello 👋🏻 I’m a new subscriber and I really love your work.. it’s beautiful

[@AtelierSANGBLEU]

Thank you so much🙏🏻🤗

[@olejan1438]

Hi! Thanks for sharing your new project, I just found it. You are really a very good leather craftsman and a nice person! I look forward to your new nice and helpful projects! Thanks bro! ✌🧒👍 Cheers from Russia!

[@AtelierSANGBLEU]

Thank you sooo much!!! Hope you enjoyed this and I’ll prepare another project ASAP! 🙏🏻🤗😉

[@olejan1438]

@@AtelierSANGBLEU Great!🖐🧒👍

[@محمدسعيد-خ2ي1ف]

ماشاء الله تبارك الله تسلم ايدك 👏👏👏

[@AtelierSANGBLEU]

Thank you :)

[@devinify]

본드 뭐쓰세요? 저도 이렇게 만들어서 썼는데 2년 되니까 본드랑 엣지코트가 녹더라구요 ㅜㅜ

[@AtelierSANGBLEU]

어떤 본드를 사용하셔도 결과물이 그렇기는 쉽지 않을텐데 안타깝네요... 특정 브랜드를 말씀드리긴 어렵지만, 저희는 여러 제조사의 수용성 본드류를 두루 사용합니다. 결과물은 어느 회사의 제품이던 대동소이 합니다.

[@devinify]

@@AtelierSANGBLEU 저도 수용성 썼거든요. 파란거.. 비싼거 … 엣지코트도 비싼거 giard…. 그냥 오래되서 그런가 봅니다. 하나 만들때가 된거같아요. 이거보면서 만들어야겠어요! 👍

[@ahmedkadow666]

Sir, I am an admirer of your excellent work. May I suggest that you use the third part of the piece you made the cut from to add a leather bracelet to the watch strap. They would make a handsome set. Regards.

[@AtelierSANGBLEU]

Thanks a lot for your interest in our artwork:) I guess what you've tried to describe was the additional layer of underneath part that covers the wrist from the case back. Yeah, maybe I'll try them as well in the future, thanks a lot ;)

[@lolofof4544]

시간가는 줄 모르게봤습니다 :) 너무 마음에 들어 제작 문의를 하려고 찾아보니.. 스트랩은 제작의뢰를 안받으신다고 블로그에서 보았네요.. 혹시 스트랩전문으로 하는 다른 공방을 추천받을 수 있을까요..? 조심스레 질문드립니다!

[@AtelierSANGBLEU]

좋게 봐주셔서 감사합니다🤗 함부로 추천을 드리기는 조심스럽습니다만, 한국에 계시다면 시온 사장님이나 인피니토 사장님 추천드리고 싶습니다 :)

[@R2D2NERO]

this is finest work i ever seen on KZbin, two questions 🙏🏻 1. why adding a paper in the middle layer? 2. why need hot ironing after edge paint? smoother? thanks 🙏🏻🙏🏻

[@AtelierSANGBLEU]

Many thanks🙏🏻 1. that's not a paper, that is the non-stretch reinforcement to prevent stretching of the straps. 2. sealing the edge, more secure adhesive performance, smoother surface of the edge.

[@R2D2NERO]

@@AtelierSANGBLEU thank you so much, learnt a lot

[@daeseonpark444]

시계줄 만들어 보려고 여기저기 커뮤니티 둘러보아도 성에 차지 않았는데, 정말 진심인 영상이네요, 훌륭합니다. 서너번 보았습니다. 그리고 궁금한거 한가지? 본드병(원터치로 여닫을 수 있는) 어디서(?) 구입가능한지요? 인터넷에 아무리 뒤져봐도 찾을 수 없네요,ㅎㅎ

[@AtelierSANGBLEU]

도움이 되셨다니 기분도 좋고, 너무너무 감사합니다💪🏻🙏🏻 이 영상에선 제가 좀 평소랑 다르게 보강재를 넓게 깎아서 굴곡이 안예쁜데, 아주 약간 더 넓고 완만한 모양으로 깎으시면 더 예쁘게 쉐잎이 나올겁니다;) 키링 영상 참고해주세요 거기선 더 예쁘게 깎습니다;)

[@depodarcom]

You have a real talent....For making puncture what is the stiched length you use

[@AtelierSANGBLEU]

Thank you. Unfortunately, we do not answer technical & design-related things related to our original design patterns, sorry 🙏🏻

[@hammadilouati7759]

perfect

[@AtelierSANGBLEU]

Thank you!🙏🏻

[@miljanpetrovic2347]

Beautiful work! Really something special! Can you please tell me where to find this wing divider to buy? Tnx all the best

[@AtelierSANGBLEU]

Thanks a lot. I recommend Vergez Blanchard for the antique tools but if you want some modern tools, choose the stainless products to prevent rusty effect over time.

[@miljanpetrovic2347]

Thanks, really! Keep posting videos, you are truly inspiring, and you are motivating so many people with your work! All the best man @@AtelierSANGBLEU

[@lorrisl5026]

As a french leathercrafter, I wouldn't really recommend verges Blanchard anymore. They have some nice tools like "l'indispensable" but most of their tools are too expensive for what they are. When I got serious about leather crafting, I compared buying from them vs prime leather tools, and the difference in price was astonishing! I ended up buying from prime leather tools and I love everything that I've got for that price.

[@OmniCasper]

Beautiful, but can you tell me, who is the producer of the velodon you used in the project? (I searched on the internet, but could not find the german producer of the material.) Thanks in advance!

[@AtelierSANGBLEU]

You can easily find the sellers of that material nowadays, but we cannot tell the specific manufacturer as the sellers not specifying that

[@vlad_ovcharenko]

great, tell me pleas where i can buy such a plastic pattern for the strap 22-20

[@AtelierSANGBLEU]

All of the patterns and designs are made by atelier SANG BLEU and this is not for sale😅 But, as we get a lot of requests about the patterns, we are planning purchasable patterns soon on our web showroom. Please wait for that and stay tuned for the other interesting projects😉🙏🏻

[@alvinsquezz]

Awesome craftsmanship.. If I order one, I’d like you to make a whole alligator leather straps. No other leather material should be added to it. Both the main and inner leathers should be “ALLIGATOR”!!! 😍 How much will it cost me?? Please lemme know.

[@AtelierSANGBLEU]

Thanks a lot :) Since our major designs are not the straps, we don't offer the straps for the bespoke these days 😭

[@alvinsquezz]

@@AtelierSANGBLEU awww thanks for your reply. Keep the awesome job going. 😍🤣

[@louisgianfrancesco]

Great work! Outcome is superior!

[@AtelierSANGBLEU]

Thanks a lot!🙏🏻😉

[@박세영-x8u]

좋은영상 잘 봤습니다! 아크릴패턴은 어떤 제품이죠? 패딩부분이 구멍이 뚫려 있어서 작업성이 매우 좋아보입니다!

[@AtelierSANGBLEU]

댓글 감사합니다! :) 제가 디자이너이기 때문에, 모든 패턴이나 제 디자인들은 다 제가 직접 디자인해서 만든 커스텀제작품 입니다 ㅠㅠ 아쉽게도 판매용으로 나온 제품이 아닙니다;)

[@salimbennahia5247]

Nice work 👏👏..I like the watch, send it to me ⌚🤲

[@AtelierSANGBLEU]

hahaha🤣, I can feel you really loved my works, thanks a lot, man! 🙏🏻😉🥹

[@flightschoolcustomfootwear]

This watch is absolutely beautiful!! What kind of watch is it?

[@AtelierSANGBLEU]

That was the Frederique Constant classics manufacture

[@flightschoolcustomfootwear]

@@AtelierSANGBLEU thank you so much

[@WooYan]

Nice!! may I know what cream you apply after beewax?

[@AtelierSANGBLEU]

Thank you! That was just a beeswax-based cleaner:)

[@jjswitch887]

Hey. Great work. Could I ask what temperature you use on the iron for the edge paint?

[@AtelierSANGBLEU]

That's all depends on what kind of edge paint & machine is used. And, that's sort of the technical things and we do not provide technical things, sorry 🙏🏻

[@andrecarvalho1268]

Hello. Congratulations for your impressive work. Can y know what product you use to finish the leather. Thanks in adavance

[@AtelierSANGBLEU]

Thank you for the comment! :) I've been using the Stahl edge paints but, you can use the Uniters as well. Both of them work pretty well ;)

[@andrecarvalho1268]

@@AtelierSANGBLEUthank you very much.

[@tripcs3794]

This is great! Would you mind telling me the thickness of the strap materials and padding

[@AtelierSANGBLEU]

Thank you for the comment, what I can tell you is the total thickness. Generally, I follow the buckle's allowing thickness as it is D-buckle(they have a limited thickness allowance). Mine was about 1.8T~2.0T And I tend not to exceed 2.0T because the bulky strap is not nice to touch and wraps around our wrist ;)

[@tripcs3794]

@@AtelierSANGBLEU thanks a lot I appreciate it this video is going to be very helpful

[@youcallittoo]

잘 봤습니다. 그런데 피할할때 사용하신 칼은 어떤 제품인지 여쭤봐도 될까요?

[@AtelierSANGBLEU]

영상속의 피할용 나이프는 커스텀 제작되었던 나이프라 시중에서 구하실 수 없으실겁니다:( 그런데, 어떤 도구여도 날 관리만 잘 되어있다면 충분히 피할 0t 까지 하실 수 있습니다, 블랑샤르 하이스강 페링 나이프도 손에 익으시면 좋고, 블랑샤르 페링나이프중 손잡이 없는 플랫한 나이프를 날 관리 잘하시며 사용하시면 그것 또한 좋습니다;) (하이스강은 일반 나이프보다 샤프닝이 조금은 덜 필요해서 좋고, 샤프닝만 자주 잘 해주신다면 일반 날물로도 결과물은 동일하게 하실 수 있으실겁니다)

[@tonyyong]

Great video, can I know where you buy your watch templete, appreciate the info.

[@AtelierSANGBLEU]

Thanks a lot!:) Oh, cause I’m the designer, all of the templates are designed and made by me;) Unfortunately, they are not for sale😭

[@renjizuka]

Hi i love your works! Its so beautiful and very high end detail. Just curious, what size do you use for iron pricking? Is 2.7 or 3?

[@AtelierSANGBLEU]

Thanks a lot! Typically I use the #12 for watch straps which is not used often nowadays 😉

[@SebastianSanchez-xj8mk]

Awesome work!!, where did you get the templates from?

[@AtelierSANGBLEU]

Thank you for your interest in our artwork. We design our products and the patterns you saw (they were our original designs.) We've been making these patterns and developing our designs.

[@brendanfugere9225]

Are you selling those acrylic pattern pieces?

[@AtelierSANGBLEU]

Oh, unfortunately, we don't sell our original design patterns 🙏🏻

[@Downny]

Hi, your video is very good. I have learned a lot from your videos. Can you tell me how to buy leather like in the video? I’m from Vietnam. Thank you!

[@AtelierSANGBLEU]

Thank you! Unfortunately, all the leathers should be ordered from the representatives or agencies of that tanneries. You should find your local distributors or representatives to oder them

[@TheZibil]

how do you get your stencils to stick like that?

[@AtelierSANGBLEU]

stencils? you mean the patterns? just with the double sided tapes.

[@BonjourMyCoin]

Hello. what kind of glue do you use?

[@AtelierSANGBLEU]

We've been using the water based glue

[@robblowe8525]

Where do you get your templates from and can I purchase some

[@AtelierSANGBLEU]

Thank you for your interest in our artwork. We design our products and the patterns you saw were our original designs. So, we do not sell the pattern design of our products currently running to prevent copies or imitations. All the rights are reserved to the atelier SANG BLEU. But, we have a plan for purchasable pattern designs for the crafters out there in the future, so plz stay tuned for us to set up our web showroom to sell our designs for the beginners😉

[@flightschoolcustomfootwear]

What temperature do you have your hot iron creaser at?

[@AtelierSANGBLEU]

Have no fomula about the specific temperature. It depends on the products and paints, all of a them should be tested for the temperature one by one.

[@flightschoolcustomfootwear]

@@AtelierSANGBLEU okay great! Thank you so much for that info! That makes total sense cause I have noticed it's different on different materials! Much appreciated!

[@khaganimammadov8981]

Great video and watch strap. May I ask you where can I buy this strap templates. Thanks in advance.

[@AtelierSANGBLEU]

Thanks a lot!:) Oh, cause I’m the designer, all of the templates are designed and made by me;) Unfortunately, they are not for sale😭

[@khaganimammadov8981]

@@AtelierSANGBLEU Thanks for your reply.

[@ellis3547]

Hi, where can i get the stencil that you used here?

[@AtelierSANGBLEU]

Stencil?? You mean, the acrylic patterns? All those patterns are designed & made by us and unfortunately, they are not for sale🥹

[@Lame_Kiwi]

where can i get that acrylic patterns?

[@AtelierSANGBLEU]

Thank you for your interest in our artwork. We design our products and the patterns you saw were our original designs. So, there's no place to get our patterns 🙏🏻

[@떡잎이]

겉감(악어)랑 안감 두께는 어떻게 되나요?????

[@AtelierSANGBLEU]

보통 시계줄은 너무 두터우면 나이스한 느낌보단 단단한 느낌이 들 수 있어서 2T를 넘기지 않는 선으로 제작하려합니다 :) 물론 버클에 따라 맞춰서 얇게도 하구요~! 총 1.8T정도 내외로 잡는게 가장 나이스할겁니다😉

[@muaysa1252]

Derilerin kalınlığı nedir

[@AtelierSANGBLEU]

We do not reveal the technical things for our products🙏🏻 Please refer to the *Note on the description.

[@lunabamba]

Hi, what the thikness of the velodon? Olivier

[@AtelierSANGBLEU]

Thank you for the comment;) That reinforcement was 0.2t🤗

[@krasenpetrov2805]

Great job!Where do you buy exotic leather for your projects?

[@AtelierSANGBLEU]

Thank you for the comment ;) I've been contracting with the local distributor of the exotic tanneries in here. If you need to get the exotic leathers, you should find the local distributor like I did on your country. There have CITES issues when we need to import or export them by our selves, so I just recommend you to find one 😭

[@krasenpetrov2805]

@@AtelierSANGBLEU The problem is that in my country doesn't have any exotic leather distributors. That's I asked you about your supplier. If they can shipt abroad that will be possibility for me.

[@AtelierSANGBLEU]

@@krasenpetrov2805 That's too bad... maybe if there have no distributors or representatives, you might contact the tanneries to ship them to you directly with the exporting CITIES but, you should know how to handle the import CITES documents on your country which is the hardest part🥲.

[@sahil6417]

Can I buy this watch?

[@AtelierSANGBLEU]

Not for sale🙃

[@Ccjwwu21]

Frederique constant fc-710mc4h4

[@BulldogStyle]

where did you obtain the acrylic templates please?

[@AtelierSANGBLEU]

Oh, cause I’m the designer, all of the templates are designed and made by me;)

[@BulldogStyle]

@@AtelierSANGBLEU do you sell them?

[@AtelierSANGBLEU]

@@BulldogStyle unfortunately, they are not for sale😭

[@shafeenmunir3513]

bro what is your actual job to afford a patek?

[@AtelierSANGBLEU]

Oh,,,, that was not the patek unfortunately😅 I wish I could afford them someday🥹

[@Dg-atelier]

can i buy a pattern?

[@AtelierSANGBLEU]

Thank you for your comment! but unfortunately, this is not for sale 🥲

[@adamethancrow]

I couldn’t watch it the music was so depressing. 😅

[@AtelierSANGBLEU]

I thought it was the calm mood but ended up depressing lol...

[@maximnegara3875]

Not bad , but I wold reverse the middle piece you have scived with the face up in order to have a smoother surface of the croc leather that you are gluing on top.

[@AtelierSANGBLEU]

Thanks a lot for your suggestion! Great idea! From time to time, I do that flipping for that reinforcements when the supple leathers were used as the reinforcements (such as Chèvre, and other supple calf articles) But, I tend not to flip the Barenia as it is pretty hard to push them down facing up (Barenia has the Veg tanned leather's hard characteristics) Even with that face-down method, we can achieve a smooth surface which is shown on the other video that I've uploaded 😉 You can check them out in this video below🤗 kzbin.info/www/bejne/omXCi2l5pLZsqdE