ATEM MINI EXTREME | What you need to know!

Blackmagic have announced the ATEM Mini Extreme & Extreme ISO to it's line up of production switchers. Here's everything you need to know about the two new models. With 8 HDMI inputs, 2 HDMI Outputs, headphone monitoring, 2 USB-C Ports, 2 DVE's, SuperSource, 4 Advanced Chroma Keyers, and a lot more.... It's hard to say this isn't the perfect ATEM Mini!
ATEM Mini Models
ATEM Mini: go.alex.live/atemmini
ATEM Mini Pro: go.alex.live/atemminipro
ATEM Mini Pro ISO: go.alex.live/atemproiso
ATEM Mini Extreme: go.alex.live/atemextreme
ATEM Mini Extreme ISO: go.alex.live/atemextremeiso
ATEM Streaming Bridge: go.alex.live/streamingbridge
Full Kit List:
kit.co/alexpettitt/atem-mini-...
(Note: Contains affiliate links)
#Blackmagic #ATEMMINIEXTREME #Partner

[@AlexPettitt]

Got a question about the ATEM Mini Extreme / Extreme ISO? Put it below and I'll reply to as many as possible! The best ones will be included in my next Q&A video. Enjoy 😊

[@hishamzireeni8932]

How and what is the best way to do graphic animation using the new Atem mini extreme features without scarifying a lot of its resources?

[@AlexPettitt]

@@hishamzireeni8932 I’m hoping to have a video on this out soon, but there are a few ways. One it to utilise the Chroma Keyer with something like OBS or GFX software that can output against a green background like H2R Graphics. Others like to use Pre-Rendered graphics with a Hyperdeck Studio to use the Key and Fill outputs from that into the ATEM. In also have a few others ways that I have discovered and am hoping to do a video on this soon. I’m still testing currently :)

[@jmpjexplique]

Hello Thanks for this video ! On your channel you describe many workaround to use Atem mini xxx for Live Streaming like Twitch (Live Chat Integration, StreamDeck for macros, videos stingers, etc.) Would you recommend Atem mini against OBS+capture card for non-gaming/gaming live Streaming ? Or would it be a frustrating experience ? I mean : 1) with OBS : "everything" is possible but uses PC resources and needs (in my case) 3 HDMI inputs => $500 capture card + Streamdeck 2) with Atem mini extreme : need workarounds to forget OBS, but very reliable, no more Stream Deck with 6 macros keys (ok 6 is quite low)

[@cmiller7299]

I read in the updated manual that you can't solo tracks via headphone out on the Mini extreme. Thoughts? I'm worried the headphone out will be quite limited with routing capabilities.

[@AntoineVialatte]

Hello ! Do you know what is the minimum speed of the SSD disk to record on the ISO ? Do you think the samsung T5 would be enough ?

[@higgypop]

Thanks for this! Got me excited. Mine arrives tomorrow!!

[@mavs8888]

Thank you Mr. Alex and I am looking forward to the videos you promised to make! See you and THEM (videos) soon! Take care and thank you again!

[@CreateConsumeRepeat]

Another solid episode. I love the 2 keyers and 2 HDMI outputs. Huge improvement.

[@AlexPettitt]

So many new features. Glad you found the video useful 👌

[@BlackAesop]

Great video. I saw in the comments it's shipping soon so that is great news! I preordered day of release from Adoroma and was 5th in line so I'm hoping I may have it by next week. Cheers m8!

[@lgf30022]

I bought this he ATEM mini pro iso a few months ago. Love it, still learning it. I agree with you about NDI support. Keep my existing ATEM and upgrade later in the year for ISO. Looking forward to your other videos on production flow!

[@AlexPettitt]

Thanks Lee, Great to hear! Yeah I definitely think the Extreme ISO is the way to go for you if you already are used to your PRO ISO. Thanks for your support man!

[@hishamzireeni8932]

Thank you Alex, and great presentation. I can't wait getting my ATEM Mini Extreme ISO which is expected by mid March 😅 look forward to your videos too.

[@AlexPettitt]

Glad to hear you went with the ISO... it really does look like a beast! Thanks for your support!

[@meisterton_]

Hey Alex, thanks for your content. Best reviews I've seen so far. Informative, on point, professional and entertaining. Thumbs up! 👍👍👍

[@jurgenvanechelpoel]

Great walkthrough of the new features . I’ll have my Atem extreme on Friday. Looking forward to it.

[@AlexPettitt]

Thanks Jurgen, and that’s awesome to hear... I have no doubt your love it!

[@losaltospolitico1]

Lucky you. Are you in Europe? Me in USA. Waiting impatiently.

[@jurgenvanechelpoel]

@@losaltospolitico1 Yes, in Belgium. I wasn’t expecting it so soon either, but I got a call from my distributor that it had already been delivered. I can’t wait to play around with it.

[@ElJorgeGil]

You always great Alex. Thanks!

[@TrustedTackleTips]

My extreme arrived yesterday. Really impressed although a bit of a learning curve from my mini pro.

[@pgdh]

Thanks. Your video son the ATEM Mini Pro ISO really helped me take the plunge. I'm just amazed at the pace of progress and will be seriously thinking of upgrading to the the EXTREME ISO. BTW I discovered that you can connect two SSDs to the ATEM Mini Pro ISO using a USB-C to USB3.1 Gen 2 hub (e.g. StarTech's UCB-C to 4x USBA 10Gbps hub with 2x Samsung T5 drives - and it will switch from one disk to the other as the first becomes full). I've yet to work out if the same technique can be use with OTG mode to make it possible to use webcam mode at the same time - but there's probably an issue with the computer and switch wanting to use the SSDs at the same time).

[@losaltospolitico1]

Thanks for the deep dive compared to other reviewers. Looking forward to your virtual set demonstration.

[@AlexPettitt]

You bet! Really glad you liked the video! And yeah, I'm super excited to show of that feature....now I just need to get my green screen up haha :)

[@usumaniddrisa3837]

I was waiting for this video for the whole time since it was announced. Finally

[@AlexPettitt]

Haha I wish I could have had it up sooner, I’ve just been swamped with productions recently. I hope you found the video useful, and don’t worry, as soon as my Extreme arrives, I will be uploading a bunch more videos.

[@usumaniddrisa3837]

@@AlexPettitt perfect I'm gonna hear from you before buying mine... how do I get your one on one section ?

[@Snipersounds]

Alex your videos are SO great! Thanks a lot for sharing!

[@AlexPettitt]

Glad you like them! Thanks for the lovely comment SniperSounds :)

[@cmchicago]

Thank you. Great package. Great information. Appreciate your enthusiasm.

[@LeeSummitVideo]

What I needed Ordered I got a mini first, and since I already had over eight cameras from doing wedding video started thinking about it and ran that into another ATM mini pro I got. Wanted to set this all up in a band studio for obvious streaming reasons as well as use in the future for weddings etc. this is exactly what I need! And for those of you that don’t know strata pro also recently updated their software app for controlling the black magic Atem I’ve been using it prior and now they’ve got an actual preset for such! This super helps me as the actual black magic units are across the room in the studio and I am playing keyboards singing lead vocals and harmony as well as controlling the lights and running the sound now also live 8 camera video production from iPad! Really do love it I was always doing overkill and did 8 to 10 cameras at all weddings... and was getting into shooting 360 video for the band... This is really going to be fun! Got a green screen for Christmas! Love to be able to afford black magic cameras😬🎤🎹🎸🥁🔊 Thx so much for all your help! Any advice in the future for how one could slowly get into purchasing may be the lower end for using which black magic cameras for live concert and/or wedding video streaming would be much appreciated? mine are a accumulation of many different video cameras as well as regular cameras & 360 and I use final cut!

[@AlexPettitt]

Hey Lee, love to hear how your using your ATEM Mini's in so many different ways with weddings and band gigs! No doubt you will love the Extreme as you're already using so many cameras :) Interesting video idea about purchasing tips... let me give it a think over and see if it's something I can do :)

[@LVTHalo]

It’s the gift that keeps on giving

[@wolf-dietergrabner9762]

Thanks for the video! Good overview.

[@alan.macrae]

Thank you Alex. Great information as always. You are a great resource and I appreciate all your help. I have the ISO on order

[@AlexPettitt]

Glad to help! Thanks for the lovely comment!

[@JasonGraystone]

Looking forward to the supersource video!

[@rmp5s]

Yeeeea...I'll pitch you a sub. Good info, well presented. Deserved. Keep up the good work, man. 😎

[@toddcowart]

Excellent video- thanks and the new devices look incredible. I can’t help but think that there are lots of people like me that only have 3 or 4 cams/sources, but really could use the dual usb c connections (one for cell phone streaming and the other for ISO SSD files) and dual HDMI outs. I also like the small form factor of the old ATEM MINI PRO ISO. Maybe an updated version ATEM MINI PRO ISO - version 2 with the form factor as the old model + 2 usb and 2 hdmi?

[@ScoTreVan]

Waiting for this next extreme video Alex,,, thanks

[@AlexPettitt]

Lots of content planned for when it arrives Trevor! Thanks for your support :)

[@jeromem6969]

looking forward to that workflow video..

[@joelalonsopr8]

Great vid! Any recommedantion for a usb c hub so we can use tethering and record the program as well at the same time?

[@HyRax_Aus]

You can't. Doesn't work that way.

[@skywalkerstudios1]

Yeah you can't use a hub, just need the 2 USB C on the Extreme

[@barkerbiztv9837]

Extremely, informative video, really enjoyed it,,

[@higgypop]

Hi Alex, I have a question. My Extreme just arrived and it's great, got everything up and running quickly. But the options for colour bars seems to have gone. It's no longer assigned to a source button (although there is a button for it on the Select Bus). I used to have this set as my startup state because it's a quick and easy way to see everything is working when you power up. Is there a way to assign the bars to a button?

[@AlexPettitt]

Hey Higgypop, mine hasn't arrived yet, so I can't be sure, but all software buttons should be configurable within the settings of the ATEM Software Control. Go up to the menu bar with the software open, and click on preferences, then navigate to the button mapping page :) You should be able to make changes in there :)

[@higgypop]

@@AlexPettitt sadly not, I only seem to be able to map cameras, but thanks. I'll keep digging!

[@jrod291]

Amazing video

[@eaweddings7292]

mind blowing !!!

[@Dreams2realityfilms]

Amazing content!

[@AlexPettitt]

Thanks Videll, I really appreciate you saying that 👍

[@sintheticMotion]

Thanks for this overview about the new features, i ordered the ISO Extreme last week and i'm looking forward to work with it - since i already use the Mini Pro and Mini Pro ISO i don't think there is a benefit of combining those two with the Extreme Model except having more sources which i doubt is necessary ...

[@AlfonsoFP]

With 2 XLR audio inputs, it would be perfection. 🙌

[@HugoWiffen]

with a $70 adapter you can do that anyway

[@stanmanmedia]

Great job. Helped tremendously!! BTW, ironically it was a superb video on some sophisticated equipment, yet a cheap pop filter would have made it much easier to listen to. It happens to me on my mics too..

[@MrPelastus]

Nice video, explaining these new video mixers. I have two questions: 1. Are the mic inputs for connecting a stereo source, for example from an audio mixer? 2. Do the HDMI inputs/outputs support 4k video resolution?

[@jezzathenugget]

hope your having a great day

[@AlexPettitt]

Right back at you Jeremy!

[@bernzeppi]

I’ve been using the highest end switchers for 20 years... I’m blown away. Methinks I’d add fibre or SDI interface to finish off the system.

[@AlexPettitt]

It's amazing how much they have fit into this tiny device!

[@gregblack2108]

Hi Alex - Great review of the BM ATEM Extreme. Looking at the features, do you think that chroma key and down key will be able to be used during the same production?

[@daveassender1099]

Alex, you are awesome! So I'm assuming, if we were to use this for a conference, that we could use the HDMI outputs to throw different content up on two individually switched projector screens, use the ethernet out to live broadcast, and still record to hard disc using the second USB-C port? That would be sensational.

[@Blackfilmguild]

How would you get 4 feeds if people are in different locations? Where is your super source video? I couldnt find it.

[@NorwinChristianChurch]

How's the audio sync? I know that was an issue with the ATEM Mini Pro...any fix for that?

[@videomacher77]

Hi Alex Thanks for this very helpful video. I am very interested in ndi-technology. So if i would have something like the birddog ptz keyboard (and a birddog camera as well as other cameras linked via ndi), woul i use the atem mini extreme for webstreaming and recording the different cameras? Or can i do all this in ovs or in the ptz keyboard itself?

[@NatWallen-Realtor-Charleston]

This was great! - 2 questions... I am a premiere pro cc user - 1. do you think the Davinci file could be used in premiere? Is there a conversion process to think about?... AND 2 - Is there a live cam setup that could be done in premiere, to just skip the hard drive transfer of files, and push it directly into an editing program instead? - Thanks again! Great explanation!

[@JeanMarcLavoie]

I wanted the two HDMI outs so I can feed one to my LiveU Solo. I feel for situations like this it is better to have my PGM going to HDMI out 2 so I can easily switch from M/V to different camera angles on HDMI out 1 if I want to check something full size on my screen.

[@SpeakersCornerUK]

Does the stem mini extreme allow one nitrate for live streaming and another for recording higher nitrate to SSD?

[@joseph-israel]

Thanks for the video!!!! I Got the Extreme Iso. but one of my camera is only capable of 4:3 aspect ratio, while the others are 16:9 .... how do I get the 4:3 aspect ratio to display as a 16:9 and keep the values both in s/source and program? thanks

[@SyncLabMediaStudio]

Does the ISO record the combined camera/background when using the advanced keyer function on that input

[@harshrathod310]

I think if so many features are added to just small device and we use them all together like 8 camera inputs recroding in iso plus streaming plus supersource plus macros and a webcam dont u think it will overheat or start loosing frames?

[@livestream6536]

Hi Alex, thanks for great videos. I have an ISO Extreme, wondering with iso recording a virtual studio setup, is there a way to get the isolated camera feeds with the chroma key for each camera? Also when using the supersource how to include the key for any of the source cameras. Thanks, Siguroli.

[@Blackfilmguild]

Is this better to use with OBS or just use it without OBS?

[@engagingvideo2550]

Hi Alex, thanks for the resourceful video. Will the phone be charged when connected for hotspot? Otherwise it will die quite quickly?

[@RobertJacksonb-roll]

Hi Alex any suggestions on how, and if one can use the MV output of the ATEM Mini Pro and not send to program output ? I'm not able to afford the Extreme just yet.

[@TomQsTechTips]

Remembering the difficulties that the Pro ISO had with the Samsung T7 and the SanDisk Extreme Gen 2, I'm really looking forward to hearing about what kind of disk it's going to take to record all 9+ files. I hoping that turning off record of some of the inputs will be an option.

[@AlexPettitt]

Absolutely! Lets imagine 9 Hyperdeck High files = 9x 70 Mbps = 630Mbps + headroom from the WAV files & DaVinci file. Luckily we're talking megabits here and not megabytes....so most good SSD's should be able to handle that nicely!

[@TomQsTechTips]

​@@AlexPettitt Oh... it's Mbps not MB/s. So... the Gen 1 Extreme's 550M*B*/s is MUCH better than the bare minimum 630M*b*ps?

[@bentheodore]

Just got the iso pro, and it's already obsolete😭😭

[@EnsembleAdapter]

Hi Alex, thanks a lot for your videos, big help! My question (not sure if it has already been asked): Do I get it right that the new camera control buttons on the ATEM Mini Extreme can't access the zoom function on the Software control?

[@AlexPettitt]

Yes, I believe this to be correct too. As far as I can see, Zoom is still controlled through software only. I can see that it makes sense, as with Zoom you need precision, which you can't quite get with up/down buttons

[@EnsembleAdapter]

@@AlexPettitt Many thanks for getting back! Yes, the precision would indeed be difficult to achieve through those buttons, I am sure. But maybe there might be solutions for that in future? From a practical point of view I would find it much more important to find such a 'button solution' for the Zoom instead of the other camera parameters. For me, while shooting, it is more likely that the Zoom of a camera that needs to be changed on the go. And instead of having to go into the software control panel for that it would be really great to do so with physical buttons on the controller. Parameters such as ISO will more likely be worked on before actually shooting, so the buttons don't really make so much of an advantage from a practical perspective, in my opinion..

[@robertbeatty1]

Thank you for your channel. Great content. On the ATEM Mini Extreme, is there a way to configure the multi view (or some other output method) such that the connected HDMI monitor is filled with the PROGRAM with audio levels visible? You can press a button on the ATEM Mini Extreme and tell the multi view port to output the PROGRAM. That's good, but it doesn't have the audio levels on it. When I'm running a show, I need to setup a large monitor with the PROGRAM and the audio levels. Is this feasible?

[@paulwood1449]

Hi Alex, Great channel! Any idea if the extreme will play nice with a 5k monitor? currently, plugging the atem mini into hdmi on my mac mini immediately downgrades the resolution of my main 5k monitor - even tho it's connected via usb C - i've not been able to find any way around this and it's really frustrating?

[@jamesinnes5036]

NDI addition would be good. NDI seems very expensive but maybe BMD will disrupt that market by selling convertors from HDMI (or SDI) to NDI at similar prices to their mini convertors.

[@crooker2]

I'm currently a VMIX user, and I like it because of the ability to bring in video inserts and onscreen graphics built in. What kind of solutions are you using for bringing in animated graphics and inserting external videos into your production?

[@pablowasserman]

Is it possible to connect 2 cameras to the ATEM Mini and have them as separated sources on Streamlabs OBS to make a split screen with those 2 cameras?

[@michaelcendo]

This looks amazing, but I wish they would have just added a second usb port to the smaller form factor. I know it is still mini by comparison, but now its too big for my mobile setup.

[@gerardobello1747]

Excellent video. My question is, how many of this DVE and media players can I use simultaneously? In my Atem mini pro I can use just one of them at a time. So I can’t do a Picture in Picture and have a lower third or have a logo on the corner and changes from one camera to PiP and keep the logo etc. Thanks!

[@AlexPettitt]

So with SuperSource you can use all 4 DVE's at the same time. These are seperate DVE's from your DVE1 & 2. Technically you can then use DVE 1& 2 at the same time as SuperSource, so you can use a total of 6 simultaneously... But I imagine that might look rather clutters on screen. But I'm definitely going to try it out in my SuperSource video. Hope this helps!

[@keodararatha1051]

great to see your review. my question is does ATEM MINI can stream direct to mobile device by using USB Type-C? thank you

[@Nalonso729]

which boom arm are you using for you RODE mike, I can't find one that fits?

[@wyntertalamasca]

I wonder about heat with the ISO version. In my use case I'd be pushing three to four channels in for several hours. Maybe up to 6 or 7 hours. Is it open enough that an external fan would be effective? Or needed? Thanks for the break down!

[@AlexPettitt]

Grant definitely made a point in the stream to say they have done a lot of work with heat and the unit is still silent. Also for reference, use my ATEM Mini Pro ISO with all 4 cams on 24hrs a day, and it's never once overheated. No external fan needed :)

[@siskoDE]

can the usb-c output on a atem mini pro only record 1080p 60fps to an externall ssd or also 4k?

[@rbengraff]

With all of the extra inputs and media now associated with the ISO Extreme, will you originally-recommend SSDs (540 MB’s) be enough or do I need to upgrade to the San disk Gen 2?

[@nilupulfoundation]

So is there any way or workaround to use the Atem Mini Pro as a webcam and record to a hard drive at the same time?

[@sambailey855]

Can you use the Davinci Resolve files in Premiere Pro? I don't use Davinci Resolve, but Premiere Pro.

[@makatron]

I can see myself to get this switcher with a monitor inside of a pelican and have it as a mobile station. The pricing it's insane!

[@AlexPettitt]

100% agree! This really is a powerful but mobile solution!

[@deadendkid1968]

Thanks for beta testing...Ill be sure and buy one in several months after they get the bugs taken care of...

[@patamuslo69]

Great presentation Alex! did you know the HDMI cable Brand that Blackmagic (Grant) uses everytime he connects Atems on the desk? im pretty sure are the same cables that uses in BM atem brochures/ads... they look good quality, and he risks connecting live and everytime works!! want those cables!!

[@AlexPettitt]

Haha So funny you should say this, I was thinking the exact same thing the other day. I like how clean they look. I also have no idea which ones they are!

[@patamuslo69]

@@AlexPettitt maybe here someone knows anotherone and we get a link!! :D

[@KulwantBhabra]

There is a problem with Select Bus Buttons on ATEM Mini Extreme ISO. I use ATEM Software Control for setting Palettes like Luma. Chroma, Pattern & DVE and use ATEM Mini Extreme ISO Select Bus to apply these effect during live production. But the ATEM Mini Extreme ISO buttons dose not change to Red during ON AIR, If require I will send XML for reference, please advice.

[@DejaGruvBand]

Is there a way to record just specific cameras?

[@videomacher77]

Hi Alex A big thank for your youtube-channel!!! I am a video professional from Switzerland without much experience in videoconferencing and streaming, and i have learned so much because of your channel! A question to the atem mini extreme: Does it have any sort of talkback-function, and how does it work? best regards rolf

[@AlexPettitt]

Hey Rolf, I'm really glad to hear the videos have been useful. To answer your question, unfortunately talkback isn't a function built into the ATEM Mini line, its mainly reserved for BM's SDI based workflows as they send the talkback feeds down channels 15&16 of the SDI. There are a number of different talkback options out there though, some more expensive than others :)

[@livepixel9218]

Big like

[@absolude]

Can i choose the output of the USB-C Ports or do they just provide the program out? I need an aux line for speaker monitor and just wondered, if i could output the multiview via one of the USB-C ports to a USB-C Monitor ??

[@AlexPettitt]

Good question, as far as I know both USB-C's are Program Output only....but once my unit arrives, I'll add this onto my list of things to test and report back :)

[@JGoodwin]

@Alex Pettitt, Do you think BlackMagic will hold the line on the camera control buttons being for BlackMagic cameras only, or do you think they'll open up more buttons to be programmable similar to those 6 macro buttons?

[@AlexPettitt]

Hey John, because everything is running Blackmagic OS, I think right now while they build the feature out everything will stay BM Cameras only....but in the future, if camera manufactures are able to build in compatibility to their cameras, there is no reason why BM couldn't branch out to send Camera Control data to others... the real question is... would it make good business sense for them to do so. The answer is probably no, as by keeping it BM, it's a huge selling point for people to purchase an ATEM Mini and BM Cameras...because it's the only way you can get that feature :)

[@JGoodwin]

@@AlexPettitt , it is my understanding that HDMI can have multiple digital signals. I am not an expert in the subject, but it seems likely the camera control would either be the Consumer Electronics Control (CEC) en.wikipedia.org/wiki/Consumer_Electronics_Control or Ethernet. Other camera makers seem to support LANC or some similar protocol. It would be interesting to see some consumer driven initiative to make arduino bridges to these things and get all things to work with all things. For my purposes, the barrier between me and buying a BM camera is good continuous subject autofocus. Right now, I have a Lumix GH4, which has horrible subject autofocus and it's very distracting to keep playing with the focus in an interview shot. Since I don't yet own a wired LANC remote, the wireless app disables the integrated flip out screen, is buried in a menu, and the app is a bit finicky and laggy, it means the camera is at arms length so I can hand set the zoom. That makes my depth of field super shallow. This is great when you hit it dead on, but also means you're easily out of focus if you move at all. You are correct that the cross-integration between the ATEM and the cameras is appealing, but at this point, if I buy a new camera, I'll probably buy a Sony A7c, just so I can call the autofocus "solved". Rather than spend $2700 on a camera and a matching good lens that mainly gives me subject autofocus, I'd love to just put large monitors up with the preview/program shots and have 3 buttons for autofocus, focus in, focus out. Even if I got a nicer camera, I would want to get a monitor setup like that anyway.

[@morchangstudios]

Great video …. Alas I can’t see why they can’t have mp4 files in the media player for stings or animations

[@Jesaiah]

Great presentation, thank you! Do you (or anyone else reading this) by chance know whether or not BlackMagic will come up w/ a Linux version of the control software? It already runs on OSX, so a proof of concept already exists anyway ...

[@jonasmjanssongmail]

Sorry if you already covered and I missed it - but did BM explain if the audio monitoring jack will be customizable? My scenario is that I’ll be producing events where my talents would like to be able to listen to some channels (remote guests and pre-recorded videos), but not hearing themselves. It’s be very convenient setting this up directly through the Atem.

[@jonasmjanssongmail]

Thanks for addressing this Q in the video! I’m about to pick up my Extreme tomorrow but was checking the manual - and as far as I understood it unfortunately seems as this isn’t available for Extreme but only for Broadcast studio. But I’m a noob so might have misunderstood did u get a chance to verify this yet?

[@predator_freeland]

Would the phone Hotspot tethering work with a little "hot box" like Verizon mobile jetpack

[@AlexPettitt]

Good question, I haven't tried this. I think technically it may need a phone OS.... but I'll see if I can get hold of one and give it a go :)

[@jericopaulojl]

Hi! How do you solve the cache getting full?

[@robindachampgaming]

Hi, i plan on purchasing the Atem mini extreme iso, i was hoping to use the recording feature for live streams and video recordings using my two cannon XC-15s. Will it be Able to do that? Or will i have to purchase black magic cameras?

[@calvingudu9237]

To record with ISO, is this done only using black magic cameras of you can record other cameras such as Cannon M50s?

[@harmanjotsingh9004]

Hello alex As ur suggestions we have purchased atem mini extreme for our temple. we use bmpcc 6k camera. We set recording at 1080. But when we connect the bmpcc 6k with atem extreme the recording settings of camera will automatically goes to 6k resolution. How can we adjust the camera recording settings aalways to 1080. Waiting for ur reply. You are the best guide for bmd products. Really Appreciate ur work.

[@scriller8]

5:56 mind blown

[@paulsloan297]

Why when I stream with to KZbin with the Atem mini pro I get the following message, “Please check the video resolution. The current resolution 1920x1080, which is not optimal. Thanks.

[@rafakomorowski9300]

I’m not sure if older ISO model (not Extreme) also can swap 1080P files for 4K versions from cameras, or not? I wonder if this also works for cameras other than BM ones?

[@AlexPettitt]

Hey Rafal, I can confirm that the Mini Pro ISO also has this feature yes. This does only currently work with BMPCC’s.

[@PedroCimbron]

muito bom parabéns abraço

[@TheVlakkie]

Is there a minimum (GPU) or operation System for Windows for the Atem Mini Pro ISO. Can I use a small Celeron Laptop for my Streams? I use the Atem Mini Pro ISO with OBS and I stream to KZbin. I had a ASUS Rog7 i7 8th Gen, but with all the off site streaming, the Laptop fell and broke... so If I can get a smaller less expensive Laptop for the streaming, that would be great. On Black Magic website I can only find that you need Windows 10 64bit...

[@gerardobello1747]

Btw, if I have a video source connected to one of the hdmi, can the videos play automatically when you switch to that source?

[@AlexPettitt]

If you use a Hyperdeck Studio Mini, the yes, there is something called Auto Roll which does exactly what you're taking about here :)

[@DrinkingWithDrewShow]

I just bought the ATEM Mini Extreme ISO, replacing the ATEM Mini Pro ISO. I cannot get any cameras to show up in OBS. Do I need to download new drivers for the Extreeme?

[@byronsutherland7602]

Great video. Can the streaming bridge be used along with streaming to streaming services?..

[@AlexPettitt]

I don’t believe it can unfortunately

[@ilanolivares9971]

I just cancelled my order. I’d like to master the advanced features of my Pro ISO before jumping into this one.

[@annemiekvanraalten826]

Hi Alex, love your YT content. Question about the Extreme, which I own. The PIP buttons and the Key1 button are both linked to KEY1, so I cannot use them at the same time. How can I change the PIP (DVE) to KEY 2 or KEY 3? I like these buttons and don't want top make macro's for that. Thanx for your quick answer

[@sundbergproduction9707]

Looking so much forward to your demo of the ATEM mini extreme ISO. When can we expect to hear from you? Best Jacob from denmark

[@AlexPettitt]

I'm happy to say my EXTREME ISO has arrived, so hopefully very soon! :)

[@HJBProductionsLLC]

When r u going to get your hands on the extreme?

[@marksouzacosta]

I'm crazy about getting a Mini Pro ISO but I'm sure as soon as I get one, BMD will announce the Mini Pro ISO 2 with those extra USB and Audio outputs

[@AlexPettitt]

Hey Mark, I understand your fear, but I'm pretty confident when saying now that the Extreme range is out, it's unlikely to happen :)

[@marksouzacosta]

@@AlexPettitt Ok I finally got the Pro ISO and it should be in my hands today or tomorrow. Meanwhile I'm studying all your videos about it. Thank you very much for sharing. Great job!

[@A.L.T.A.F]

Can you change the shape of PIP frame, for example , into a rounded corner frame, or into a Hexagon shape frame if you like?