AtGames Legends Pinball 4K Control Deck Mods From Buy Stuff!

[@PDubsArcadeLoft]

Links in video description! Let me know what you think of these ALP 4K Pinball Mods for the Control Panel below!

[@carlo1132]

I think it looks great, def going to get one. The newer HD ALP's do have 4 screws, both my 1.1 and 1.2 have 4 screws.

[@PDubsArcadeLoft]

Thanks for confirming! My ALP HD is a Dinosaur

[@gamebit9063]

Waiting patiently for the next video for adding your own games and tables! ty!

[@PDubsArcadeLoft]

Yes sir!

[@dalecummins689]

Thanks for the instructions. I ordered these overlays when I previously heard about them. Hopefully, they will arrive by or before my 4k Addams Family arrives.

[@PDubsArcadeLoft]

Nice man! Enjoy

[@mitchel440]

Great review. Going to order this when my 4k shows up and i make sure it works

[@PDubsArcadeLoft]

Thank you, hope you enjoy it!

[@davidnirtaut40]

Great video... my Attack from Mars will look awesome with the label, can't wait till I get mine! Thanks!

[@PDubsArcadeLoft]

Buy Stuff will probably make these for every skin option AtGames puts out

[@nerdloftgaming]

+1 for properly securing the ball top to the joystick lever. Too many folks recommend using lock lite or plumbers tape, when in reality, people just need to screw it down!

[@PDubsArcadeLoft]

Yep

[@ritualdelo]

BSA did a nice job matching the graphics and color perfectly … Well done 👍 nice tutorial .

[@PDubsArcadeLoft]

Thank you 👍

[@thequarterdeckarcade]

Ordered one for the Control Panel to go with my Metallica skinned HD. I opted for the version which will require me to remove everything. Should be fun. Looking forward to it.

[@PDubsArcadeLoft]

Time to roll up the modding sleeves!

[@scottboehmer1975]

Looks great! Definitely adds to the look of the machine. Once I get my Arcade control panel working again (it apparently needs to be updated, which is annoying) I will probably pick this up.

[@PDubsArcadeLoft]

Fingers crossed!

[@PapaBradLive]

I ordered this skin. Nice tutorial.

[@PDubsArcadeLoft]

Thank you

[@potatochipz3097]

Looks great ! I’m gonna order one too for my 4K ALP.

[@PDubsArcadeLoft]

Hope you like it!

[@ToxcynTV]

They look awesome. Wish atgames would do that themselves lol

[@PDubsArcadeLoft]

That's what the modding community is for!

[@darkwing7780]

fantastic time to drop in a new sanwa jlf and some new buttons. oh wait that's just my ocd xD cool product! will have to pick up the control panel artwork!

[@PDubsArcadeLoft]

True true, you notice I left the plastic cover off for a reason 😉

[@Zartanx1x]

Thanks for the info I Just ordered one. I am waiting for my ALP 4k to ship.

[@PDubsArcadeLoft]

Nice! Enjoy!

[@Roadsurfer2k11]

Good stuff PD. I ended up taking all buttons and trackball out to make laying vinyl down easier, plus I added shims to trackball. Now with the arcade panel haptics, are they the exact same they put in the 4k? Cause if the 4k ones are better, then I'll swap them over also. Careful removing, while the vinyl is much thicker than what i wrap cars with, this material tacked on well and pulling off could stretch/tear the vinyl

[@PDubsArcadeLoft]

Nice job man!

[@CallSign_Raven]

Wow, this looks great. Thank you for the video showcasing this mod 👍

[@PDubsArcadeLoft]

No problem thanks for watching!

[@delvinhenry]

Nice video! I'm definitely going to order this. Did you notice the haptics being any better on the control panel as opposed to the original panel it came with?

[@PDubsArcadeLoft]

Pretty much feels the same

[@ronaldlawrence8879]

Great job PDubbs! Love the great content!

[@PDubsArcadeLoft]

Thank you

[@meirowsky]

This looks great! I would love to see a generic control deck graphic for the Legends HD as well.

[@PDubsArcadeLoft]

That's a great idea!

[@lil4lien]

I have an Attack from Mars skinned ALP HD and been using the BuyStuffArcades ACP artwork for it and it's been holding up very well after a year! Wonder if it'll be the same one they'll release for the new Attack from Mars ALP 4K since the artwork pretty much matches!

[@PDubsArcadeLoft]

I'm sure they will do one!

[@sparky22581]

Can’t use the one I bought for the hd alp…freezes the machine after 10 minutes?

[@PDubsArcadeLoft]

Sounds like you need to open a ticket with atgames

[@sparky22581]

@ Atgames will not support anything on my machine because I bought it from Sams club I did reach out to them within the warranty period But they strung me along till the warranty was up Then told me they couldn’t do anything because I didn’t buy it thru them

[@dr.jeffreywadleigh]

Great video sir. Can I confirm that the Joystick replacement is the same one used on the HD version? So I could move mine if I wanted to?

[@PDubsArcadeLoft]

Yes, it is

[@raydelatorre9532]

My left exciter fell out. I had to use gorilla glue to put it back on

[@PDubsArcadeLoft]

Fun right?

[@raydelatorre9532]

@@PDubsArcadeLoft being an early adopter is always fun

[@gamebit9063]

All of the plastic case screw holes do not line up with new panel. I wish atgames included a new plastic case covering however the 4 on the corners do.

[@PDubsArcadeLoft]

Interesting!

[@quentinbesancenez1427]

Great video. Cant wait for mine to arrive today. It looks great.

[@PDubsArcadeLoft]

Thank you

[@EightPieceBox]

I doubt I'll ever get the 4k pinball because I have the original ALP. The control panel artwork looks great though!

[@PDubsArcadeLoft]

Thank you!

[@WIDERisBETTER]

Man I am so bad at laying vinyl without getting bubbles, but I'd love to get the Gottlieb one they have to match the sides!

[@PDubsArcadeLoft]

It takes practice

[@ChrisC488]

ordered one last week. Out for delivery today. BSA is the best.

[@PDubsArcadeLoft]

Right on!

[@aromad5557]

Why is no one making plunger replacements? I think there’s a big market for aftermarket plungers.

[@PDubsArcadeLoft]

That would be fun

[@GoldMineArcade]

I think I'm going to do this mod when At Games runs their sale again. Correct me if I'm wrong but this panel was on sale for $100 correct?

[@PDubsArcadeLoft]

Yep

[@workbirdygaming]

Yo, p dubs I'm ordering right now I can't wait for the 4k pinball! 💪💪💪 I hope I get in February

[@PDubsArcadeLoft]

Fingers crossed!

[@steveblersch]

It looks cool, but I’m still waiting for my 19 Big Buck Hunter screen from them. Do they always take a long time to fill orders?

[@steveblersch]

19 inch screen that is.

[@PDubsArcadeLoft]

I would just message them for status

[@steveblersch]

@@PDubsArcadeLoft thanks!

[@MrSteveonbroadway]

Looks like a must have..now if only could get otg to work I'd be happy.

[@PDubsArcadeLoft]

Sorry to hear you are having OTG problems

[@MrSteveonbroadway]

@@PDubsArcadeLoft hope you are not next.

[@DidYouReadEULA]

Yep, my HD has four screws holding the control panel in. Got the arcade panel myself and much easier than the original.

[@PDubsArcadeLoft]

Excellent!

[@JeffYPbPr]

im just waiting for the info as to how easy it is to get everything that is contained in the vpin (exciters/solinoids/ssf) to work with VPX and Pinball FX3. Then i buy!

[@PDubsArcadeLoft]

Makes sense

[@JeffYPbPr]

@@PDubsArcadeLoft correct me if I’m wrong. Otg/ bring your own pc isn’t supported yet?

[@PDubsArcadeLoft]

@@JeffYPbPr it works

[@SinisterSpatula]

That looks so good! Got one. Thank you 👍

[@PDubsArcadeLoft]

Nice!

[@TheWizard10008]

Great mod!

[@PDubsArcadeLoft]

Thank you

[@rmb1]

Spend all that money on this turd machine then you have to buy upgrades what an over priced under developed joke.

[@PDubsArcadeLoft]

These are "optional" mods you are not obligated to do it.