Atlas O Heavyweight Passenger Cars

[@carloszjorge]

Pardon me. I'm a model railroader. In the past I dedicated myself to reproduce in detail, including internal lighting, some models in HO - 1:87 scale, which I believe is more difficult than the O - 1.45 scale. But with all the perfection of the details dedicated by ATLAS to the making of passenger cars and especially in the observation car, I couldn't help but see that the wires that feed the LED's, appear when the Baltimore and Ohaio composition is on the track, energized, that's not should happen. It's a finishing detail. Overall the composition is beautiful. Congratulations!!

[@jamesf791]

Another great video. These cars are so beautiful. Love the colors, really bold and stands out. I always loved MTH's F and E units.

[@davidstrainsandlego]

Beautiful set

[@iananderson5050]

I'm so glad that Atlas is offering these in a P&wv paint job. I've had an MTH 2-8-0 for the P&WV with only a singular hopper and Caboose to pull because rolling stock is so few and far between for that road name.

[@DH2906PRODUCTIONS]

I'm really glad the B&O paint scheme was brought back for the CSX office car special

[@peterwadsworth7453]

Been a subscriber for a few years now and this set is absolutely stunning, F units are marvelous

[@Ericstrains]

Glad you like them!

[@1940limited]

Every Atlas piece of rolling stock and motive power I ever bought has been great. That goes for their HO line, too.

[@1940limited]

On my layout I have Lionel, K-Line and MTH heavyweight passenger cars. Overall I like the K-Line's the best. MTH left the kitchen door off their diners. K-Line has that. I had the Lionel heavyweights custom painted in Nickel Plate Road and Lackawanna. MTH and K-Line are out of the box Lackawanna although the MTHs might have been custom painted by the hobby shop where I bought them. I don't remember if that was a catalog offering or not. At the time I had decals custom made for the cars I had repainted. For hat it's worth I also have B&O E8s and a set of lightweight passenger cars to go with them.

[@jebbthetrainkid1281]

Nice Looking Baltimore and Ohio Passenger Cars. Love the Interiors with the People and that Mail Sorting Case. Nice Review.

[@Manwholikestrains]

I have some mth jersey central heavyweight passenger cars that mth put out some years ago when they were still open obviously

[@trainsimulatorfan7656]

I love the paint scheme very good look

[@jimmelchin1531]

Classy and classic. Nice to see up close shots.....well done. Thank You

[@charlesmcclure5994]

Those are some beautiful looking passengers cars a great addition to your collection

[@garyjust.johnson1436]

Beautiful! Great video!

[@baxter3998]

Atlas did the right thing. They look great as you said. As far as running them on a layout I dont have big enough curves. Would have to buy them as display models only. Even on your great huge layout they could use just a little bit more room on the curves. Nonetheless their still a great looking model.

[@Chessie1985]

Awesome Atlas B&O Passenger Cars Eric!!!

[@aidensypolt]

I am glad MTH is still around. I need their trains for my railroad in HO and O scale

[@jamesf791]

So am I. Just hope MTH becomes as good under Mike or even better.

[@larrybailey426]

Great video Eric. I'm a die-heart B&O man ... In my youth I lived next to Wheeling & Pittsburgh sub and I have been told I fell asleep watching the night steam passenger trains go by the house ... At that time they were pulled by P-5ds then P-7s ... If you could find a nice 3-Rail P-7 in bando blue you would have alternative motive power too ... Again nice video of America's first railroad ... PS: I have an MTH set in storage that I need a place to run ... Larry

[@Ericstrains]

Thanks!

[@wrangler70jkujeep74]

Besides Southern RR , B&O paint wow awesome !

[@keithscott9571]

Great looking cars and video. Keep 'em coming. That sure brings back some memories. My family rode one going from Wash. D.C. to St. Louis in 1961. Then caught a UP train to Abilene, Kans. I liked the B & O better. We were in a sleeper car and had a bathroom. The UP had a toilet in the open car, ha.

[@scottmccomas1514]

These look very nice

[@georgetrains6168]

Very beautiful B&O passenger car

[@Fridge56Vet]

Very nice!

[@Thomasthestreamliner]

Cool look

[@mr.shadestrains6033]

Your layout and whole set up is amazing 🚂❤️😎👍

[@northpennvalleysteamrailroad]

Great video! MTH Electric Trains will always be #1 in my opinion!

[@twaters4827]

Glad Atlas didnt fix what wasnt broken. Thought it was kind of funny, I dont mind that they used their own box and stamp, I would guess they prefer that as well...:)

[@amadigidigaula771]

Nice to see these, look great together, I just really wish they were scale length. I passed on them.

[@davidleopold4219]

OH, non-scale is so "unscale-lish!" Not upscale either-- more like "downscale" right?" Ugh! 21" O Scale passenger cars are so w a y impressive (provided Atlas flex track is laid to enable broader curves than any sectional track can emulate). Naturally, the Layout (who's?) would also stage benchwork against walls allowing passenger and freight consists to curve inward without any unsightly overhang. Of course, must-have (Kadee) scale couplers would be outfitted to draw-in (any) cars even more. "Passengers" wouldn't need to make a "leap of faith" after "hearing the chimes" and walking between cars to the diner as Eric kinda mentioned. Let's not neglect (everyone?) to add (car heating) steam line piping, signal, brake hoses, and hooks & chains at least on the rear platform end sill (all being brass castings from Precision Scale) used by p r o t o t y p I c a l modelers like Oriana, Richard Boyle, and even Damsels in distress. Maybe every 3-Railer should giveaway all their holdings to deserving youngsters, become a 2-Rail O Scale modeler, buy all the top rated vintage brass and add their name to every GGD pre-order? Wait! Hold on reviewers and critics alike! Actually, the cars Eric showcases are honest-to-goodness O Scale-- (just 70' instead of 85'). KZbin viewers, Eric's Open House visitors, and his beautiful velvety Russian Blue cats won't quibble a it about missing about 3 inches of ABS in length on those great looking Bando Blue and Grey B&O Heavyweights!

[@amadigidigaula771]

@@davidleopold4219 gee man, have a drink.

[@davidleopold4219]

@@amadigidigaula771 My wordy commentary was somewhat in jest-- hope that doesn't make me a "jester" and need to wear a silly hat with bells. But, I do see these "Madison" passenger cars as having nearly all the "bells and whistles" in detail 21" --or not. Since the opera, Amadigi Di Gaula, was also staged as "Oriana" (as previously included by me on the sly) there'd be another possible Alisas? Anyway, continue to enjoy one of Greatest Hobbies ever.

[@robertmckeever6910]

No roof vents for the kitchen part of the dining car?

[@trs-no8lm]

They would look good with a steam as well f units

[@anthonyrogers6393]

Man I envy you. God bless Sir

[@railking61]

Wish Atlas would have worked out being able to couple these cars closer together if you have wider curves.

[@paulconteyoutubesucks2931]

Beautiful set brother

[@ghettobat1097]

I have this set, didn’t want the rpo but now I do. I just wish the doors opened. I bought the rail king version of the locos because it was all I could find. Only has one powered A unit and a dummy A and B. Is the loco bad or just scale vs gauge? Or be$ause they are “ heavyweights?”

[@RandyCRR]

I have those in the Southern RR version, not the Crescent. I like them.

[@mr.shadestrains6033]

Wonderful video 🚂❤️😎👍

[@anthonycoach4551]

Eric got a question how do you run a MtH train on your legacy remote I don't git it I don't use legacy I have the MtH DcS set up so just wondering..?

[@Ericstrains]

It’s not possible to run an MTH locomotive with Legacy.

[@twaters4827]

Did you mention what catalog these were in??? Thanks

[@Ericstrains]

Atlas cataloged these in 2021

[@twaters4827]

@@Ericstrains Thank you....these are hard to find

[@ErikVince]

That f unit is absolutely beautiful how much was that

[@Ericstrains]

I think it was around $450 for the lead powered unit

[@chrisnichols7607]

Don't think it was mentioned - are these MTH's 70' Premier models or the RK 60' cars? The 60' cars are among my favorites, reasonably priced, don't look too bad behind scale motive power.

[@Ericstrains]

Premier

[@rick1716]

Nice video Eric. Does Atlas make a solid pilot for 3 rail engines?

[@brandonharris7516]

Wow

[@jsgtrains3176]

I have one car in Army Version Really hoping to get 4 car set.🤞

[@edlindo6005]

What is the minimum curve for these cars?

[@Ericstrains]

O-42

[@edlindo6005]

@@Ericstrains Too bad my curves are O-36. I bought a set of MTH NYC Stream Lined Passenger Cars last year that are pulled by my MTH F-3 NYC. I was looking for a set of Passenger cars that can go with my Hudson, but most of the Maddison Cars require O-42 or bigger.

[@NW-gi1cp]

Nice

[@benjaminstrains1174]

Love the Baltimore Ohio Scheme

[@walteranderson5090]

Great price. No issues with their couplers? The 21" Lionel' passenger cars give me a headache. If you don't have quick reflexes. Crash...

[@miguelangelgarrido7233]

Hola buenas tarde nuy bueno el modelo excelente video abrazo grande

[@mistermadmachine6311]

👌

[@MrStevesTrains]

Screw Lionel and they’re inflated prices. Gimme them purple boxes and those Atlas Master line.

[@stuarthobbs8028]

Trie a b and o steam train.