Atomstack A70 Pro- Z axis adjustment and setup

[@SteveTrueloveInspiredtechlife]

Alway great information and help! Thank you!!!

[@TheClackShack]

You’re welcome!

[@multicraftneo5789]

Hello from Georgia, Could you do a video on how you have multiple machines on one computer and that slick camera setup?

[@TheClackShack]

The lightburn issue is easy, just open another window. Nothing special. As far as the camera, which camera?

[@bopsworkshop8213]

Which machine did you replace. I saw a lot of 70w content when it first came out, but very little since. Time to replace my Xtool D1 20w. Is this a good replacement? Does the 35w mode allow for decent detail? Thanks

[@TheClackShack]

The 70 watt is a good machine but the dot size is larger than others. I use the 70 for thicker materials mostly.

[@Hashman10001]

Does this reduce the footprint on the Y axis?

[@TheClackShack]

No, this is just adjusting the Z axis.

[@agv1025]

Did you have to change or add settings to get the z axis to home properly or did it work correctly out of the box. I have the A70 max with the same z axis set up but mine doesn't move up when homing. Also I know you like your machines to park/home in the back left corner, where you able to set the A70 up that way or is it in the front left corner due to the limit switch being there? Thanks.

[@TheClackShack]

I set mine up as shown in this video. It is all about the physical adjustment. The park location has nothing to do with limits, it still homes front left

[@agv1025]

@@TheClackShack following your exact process and you config file my z axis does not move up, only the xy home. Do you know what might cause this? Thanks.

[@jasenwhite2263]

Mine does not z home either. Did you ever get an answer for this?

[@TheClackShack]

@@agv1025 z axis not enabled or a plug loose?

[@jasenwhite2263]

@TheClackShack My Z moves fine and will auto focus. The only thing it doesn’t do is home up with xy when I startup or hit the home button. I have all the same selections you showed in the video. I don’t get any errors. I’m confused.

[@Hashman10001]

I wonder if this works with a X40max.....

[@TheClackShack]

My X40 Max doesn't have a power Z axis.