ATV DRIVE BELT REPLACEMENT ON A 2004 KAWASAKI PRAIRE 700 4X4 (NO TOOLS NEEDED)

[@YoursTrulyC2]

Thanks for posting this Had it all done in 20 minutes including the reset

[@hallburnout70]

i would like to say thanks, you saved me 45 dollars for the tool. it works but you have to grow a pair and get mean.

[@heydude76]

god bless you for making this video!!!!! i now know what im up against thankyou again!!!

[@susdad]

You ever get that belt on?

[@richardrajner2590]

It's easier if you put a wrench on the back pulley to spin the belt on

[@PovertyPointCustoms]

Thank you, I am going to check mine now, any videos on changing the plugs?

[@ayawoke9906]

Thanks for the video, funny how people talk crap...if it works.... it's not wrong! Gracias!

[@houndjordan50]

I still have the same belt on the same bike and still ride it weekly as of 8-30-15 No problems. You must have put yours back together incorrectly .

[@GusgusA1]

Can it be done this way with a brute force 750??

[@magnetmannenbannanen]

i got to change the belt on my access 300 soon, im gonna try this method, thx. :D

[@naturalone32333]

Thanks for the vid! I though I was gonna have to pull the primary....

[@kipp3r84]

awesome that saves alot of time if you want to do it on the trail

[@larryguevara3350]

Great video, thanks

[@denisechandler3394]

I've been trying to do this on my Kawasaki mule but I cannot get anywhere near the other clutch. Going to check if it is the right belt or I am just very weak.

[@parkerbourne1193]

great video! . I have a 2002 prairie 650and there gears seems to not work.. it moves freely.. any clue as to what is causing this?

[@chistopheruribe3396]

Did you ever found out what was wrong with it ? Mine just started doing that and is the same year make and model

[@kosmoskosmos8424]

Супер 👍👍👍

[@Sg_roe]

Nice

[@houndjordan50]

What most don't realize is the front and rear pulleys spread apart for this to happen and it is not going to harm the belt by putting it on like this as far as I know belts with cords in them don't stretch

[@ramram981]

Thanks for the video. How many miles did you have on the kawasaki before you changed the belt? Did the belt break or did the light go on?

[@jkeep8379]

hey i have 650 v2 arctic cat 4wd kawasaki engine 2004 2005 model need to know what kind of belt i need. be nice if you have any advice

[@YourLadVlad]

Hi! I need some help. I was riding my ATV when it started to make a strange noise and after a few houndred meters and 2 engine restarts it was no longer moving when in gear(it is automatic). I figured out the sound was coming from the belt so I opened the ATV up so I could see the belt. Behind the round thing on the right, IDK wat is it called in english, there is some sort of a disk that is no longer fixed,(you can move it with your hands). I think that disk is the problem. What do you think?

[@mrhairy1221]

either I'm a lot weaker than I thought, or this method takes some serious muscle. I cant even get belt close to the lip of the pulley. on one hand it is an almost new belt that got a little smoked, but still.

[@MrTommy001]

Great info. Thanks. I'm sure this is exactly what I need to do on my 04 Arctic Cat 400.

[@carlomedaglia6293]

This is exactly how i used to change the belt on my bike. The clutches were both destroyed and the belt was way too loose! When i replaced both clutches this method of changing the belt became impossible! If there is that much play your secondary needs to be looked at!

[@houndjordan50]

Only thing I can tell you is that it's been almost 5 years now with this belt and no problems. So I have to disagree with your comment because my machine is still running strong. I use my atv 3-4 times a week here at my place.

[@houndjordan50]

Carlo Medaglia sorry but you are incorrect.

[@MrTommy001]

@jadelovessam For the record, I'm swapping my belt out at 3800 miles - just because.

[@pappy51]

I am trying find a Video on how to change my spark plugs. Especially the one under my seat.

[@lanceair151]

Rolling a cvt belt can cause damage to the fibers and cords. Belt deflection needs to be checked and adjusted as well. This can only be done by removing the secondary and removing or adding shims between the sheeves. Rolling on a belt might work in a pinch but absolutely not recommended.

[@tomboy650R]

Did you read that in a textbook somewhere? Everyone knows that's not real life. November 2016 and still no problems with his machine.

[@precisionbay6899]

@@tomboy650R he didn't read a text book. He literally made that up to make it sound like he knows what he's talking about. Welcome to the internet

[@jadelovessam]

what miles did your bike do on a belt?

[@humbertocampos4650]

Dose the belt in a fourwheeler have to be tight or kind of losee

[@Hateknot5974]

Loose. The way it works is it has to be lose.

[@houndjordan50]

No problems yet and I put it on when posting the video

[@houndjordan50]

@ramram981 My light kept coming on and i would have to reset the computor ithink it was around 1500 miles.

[@dillankeeley]

how do you take the cvt cover off of the prairie

[@mudpimp2]

i've tried this move on a brute and it takes lots of time and really loud cuss wurds......hehe. I believe it would damage the belt doing it this way? has anyone had any experience with this?

[@INCGerardo97]

My belt wore out at 1,200 miles now I gotta change it

[@alexrivas553]

What’s the price for the belt?

[@brandonfrost16]

how do you reset the belt light

[@dennismundy3184]

Good video,but........that belt aint adjusted right.There are no belt cogs sitting slightly above the secondary pulley.This may get you out of a jam,but I'm sure you'll be tripping that belt switch again,or causing premature belt wear.

[@houndjordan50]

Belt is still going strong as of 11-21-16 no problems.2202 miles.

[@krltgop]

how come u need the words pointing out ?

[@mrmeener625]

why not just cut the old belt?

[@benderracer]

ok, if you can do that by hand,, you should probably check to see if your clutch needs to be re-shimmed because the belt my be too loose,,,, when properly adjusted , i bet you wouldnèt be aqble to do that so easily.....¨(that might be why your old belt blew in the first place!)

[@houndjordan50]

@ramram981 i had 1500 miles on mine.

[@krltgop]

its a simple belt how will it harm any thing

[@mercedesdrifter16]

i have 10.000 km with my belt

[@steelj23]

You cannot cause damage to CVT belts by stetching them by hand. Hahahaha! Sorry but this one made me laught.

[@piercelane9]

Wrong

[@Realtrilljesus]

No as easy as it looks

[@houndjordan]

You can if you want too.