Every year I have to rebuild my carb. Thank you so much for a great video.
@jessedonaldson87687 жыл бұрын
you just saved me money and a trip to the repair shop!!! Thanks for posting this video
@MrTex1724 жыл бұрын
Great video, I’m fixing to do exact same carb change on a 2002 model.
@mudshrimpmoe5 жыл бұрын
You've been a great help, man. Thanks so much.
@FranklinBallowe3 жыл бұрын
Great Video, great teacher and Explanation!!!
@larryczinege92535 жыл бұрын
I’m loooking for a video of how to get the carb off the quad, but this will definitely help when I get it off!
@blairshiver9672 Жыл бұрын
I wish I would have rebuilt the original carb on my grizzly. I just went and bought a cheap $35 carb on Amazon and it’s lasted a couple months and the float sticking or something. Doing exactly what yours is doing.
@jimmyevans45704 жыл бұрын
Thank you Scott this is gonna work out perfect for me I subscribed
@eddylorenzo5033 Жыл бұрын
Great video
@RagnarrLodbrokAD8643 жыл бұрын
Good information thanks for the video
@Sean-Aviation5 жыл бұрын
my carb was leaking from the overflow tube. i cleaned carb and replaced all jets (repair kit). Now when i test the new needle valve, it does NOT pass air. when using an air compressor (fuel inlet) it does BUT it blows out of the whole valve from sit. My question is, does the small pin in the valve suppose to pass the air and stop when compressed?
@wcmwfab935 Жыл бұрын
My favorite way to get those 4 screws out is a dewalt impact. Works way better way easier and ofcourse faster
@oliverolover2 жыл бұрын
Thanks buddy, you saved me. Hey whats the rebuild kit number on that Mikuni for the yama griz 600 2000? and is there a cheaper carb I can buy to put on the bike just to sell it? Thanks again! Subscribed!
@doobyboy213 жыл бұрын
I just got a 2000 Grizzly 600 that was neighbour next to the sea... Everything on this quad was a rust bucket... Every single nut and bolt exposed to the elements where badly rusted... I had to Dremel cut almost everything to get to the carburetor and even on the carburetor... What a mess....
@AirMack84655 жыл бұрын
whats the part number for that rebuild kit?
@fliguy46 жыл бұрын
Float bowl screws get replaced with Allen head screw's for easier disassembly on the trail So my easier that those Philips heads
@inthenameofmyfather38362 жыл бұрын
does the kit come with the o ring on the float?
@allensharlow77634 жыл бұрын
Could you please send me a video on how to hook up a new choke on my 1999 Grizzly 600 wheeler, I’ve tried to find a video or some kind of instructions on how to do this. Any help I would greatly appreciate it, thank you Sir
@johnnytanks88626 жыл бұрын
Scott where can I buy a carburetor for year 2000 Yamaha grizzly 600I saw your video and you're very knowledgeable about
@zachblackwell98186 жыл бұрын
Johnny tanks 35$ On eBay
@Sean-Aviation5 жыл бұрын
How do you adjust the float on this carb? My carb leak fuel all the time. now the atv backfires badly when i start it (it will not run). got the carb out but looking for the float adjustment
@coreyreynolds92395 жыл бұрын
Sean u gotta bend the little tab down and it’s backfiring because gas got in the top cylinder and fouled out the spark plug so buy a new spark plug and these carbs are so cheap I’d just buy a new one off amazon for 50$-70$ worth doing that just to have a brand new one! Good luck
@johnnytanks88626 жыл бұрын
Scott where can I get a carburetor kit and a muffler for 2000 grizzly 600 Yamaha I cold freedom country ATV they don't have one do you know anybody else besides the dealer
@coreyreynolds92395 жыл бұрын
Johnny tanks amazon
@EDB02235 жыл бұрын
I see these carburetors for about $40. Is it really worth the rebuild or are these replacement carburetors ok?. I even found one on Wal-Mart. Com for $37.00.
@connorwilson86965 жыл бұрын
Bear Bridges a factory carb from yamaha is 400 canadian.. so i bought one off amazon.. cant get the needle and seat to stop leaking cheap junk
@connorwilson86965 жыл бұрын
it was 50 bucks might get lucky might not factory is always better
@EDB02235 жыл бұрын
@@connorwilson8696 I got a new one for $29. I also got a rebuild kit for the old original carb. Now I have the Yamaha carb as a spare for when Chinese carb fails. It's about a month out and doing great so far.
@outdoorswithjt665211 ай бұрын
Carb is 40$
@ricksundberg56595 жыл бұрын
Whole new carburetor is like $50 on Amazon.
@Deltathegoldenretriever4 жыл бұрын
They work for less than a month on fifth one tired of taking them off on always buy warranty but it’s just free shit