Audi A3 - How to Replace Rear bulb/brake light? Fitting new bulb & Removing Rear Light Cluster Unit

The brake light bulb had blown in my Audi A3 so I needed to replace it. The access wasn't obvious but you need a 13mm socket to be able to remove the nut that holds the rear light cluster in place. This is in a round hole behind each of the light clusters and once removed you can then pull the light away from the car to get to the bulbs. You will also need a flathead screwdriver to remove the tabs on the bulb holder.
I don't show it in this video as I'm handling an old bulb but always good to avoid touching the glass and use tissue or gloves to prevent residues being left which can reduce the life
Like and Subscribe for more VW & Porsche content
porsche911owne...

[@michaeljacobs6151]

Excellent guide with fitting mentioned thank you so much👍

[@Rdy139]

Thanks

[@uk_jay5411]

Thanks 👍

[@tarix55]

Very helpful, thanx

[@ajvw]

Glad it was helpful!

[@craigpearson7545]

Mines hasn't got this there's 4 bolts if I'm looking correctly

[@Norz-se9eb]

Cool. Thank you.

[@JG-tk7ov]

Perfect video.

[@ajvw]

Glad you liked it

[@patrykgrazda5676]

Thank you

[@mario_r_m]

What color wire Is from reverse?

[@adzhx]

Would be good to know what year the Audi is as they are not all like this !

[@ajvw]

My Audi was 2004

[@Kessysfamilly]

Thanks you🤌🤌👌🙏🙏

[@DarkSoby17]

What about the a3 cabrio/convertible? I need to change it on the left rear, but i have all the pressure stuff for the rooftop. I dont see any of that screw

[@florinrow]

13 mm socket?

[@seabenapsteronalenna3230]

😊😊😊

[@kowakowalenka6192]

Thanks🎉