Audi A4 B8 8K (2008) Cruise Control / Tempomat / MFSW Retrofit and coding

[@florinstoica5357]

You are a legend mate, I have the same car and I really think to fit cruise control over Thank you so much for the video!!! I salut your courage!

[@robbiecahill9483]

About to install new stalks, don't have coding cable yet, it's in the post. Anyone know if indicators and wipers work before cruise control is coded?

[@andreasf5882]

hello, good day. I didnt see that you have to install any kind of extra cables (wiring). i have an old 8K 2010 (no mfl, no tempomat) what do I neet to EXTRA ??? thanks

[@rasoldorian6847]

What if you change the sensor without programming it, will the steering wheel be heavy and must be programmed to work properly?

[@rasoldorian6847]

I changed the sensor, but the steering wheel became heavy and it became difficult to steer the car. Do I need to program it so that the power steering works again?

[@gonzaloamenabar1724]

Que modelo de coche es? Manual o automático, donde comprar control de crucero.

[@svetlinivanov7337]

What letter should the multi steering wheel and cruise control module be?

[@aurelalexandru927]

Am si eu un model asemanator am navigatie alipine se poate pune volan cu comenzi ??

[@stewartwatson9217]

Why did you need to change the cable

[@sotiriszarogiannis1501]

Thank you very much

[@frijus100]

what part number for lower cover steering ?

[@karelrysavy334]

Dobrý den! tempomat jsem nainstaloval nicméně nemám VCDS a neumím kódovat. Nakódoval byste mi to, prosím? Mohu se za Vámi stavit? Samozřejmě zaplatím.

[@SirSkluzman]

Záleží odkud jste?

[@karelrysavy334]

@@SirSkluzman pohybuji se na trase Brno - Praha a okolí. Můžu přijet kamkoli.

[@SirSkluzman]

@@karelrysavy334 to je z ruky, v Praze doporučuji facebook.com/rlmenc umí toho hodně :)

[@karelrysavy334]

@@SirSkluzman napsal jsem mu, díky.... a odkud jste Vy? Tipují Ostrava nebo Karlovy Vary? :-)

[@Boucek88]

@@SirSkluzman taky bych se pripojil jsem od Pribrami, to je taky z ruky ? :D

[@mesutkorkmaz8672]

For Audi A5 2013 how much?

[@Dom-D97]

Ahoj, dík za super video. Dal by jste mi na Vás nějaký kontakt?. Koupil jsem Audi a4 a na palubnim pc mi ukazuje pouze dojezd. Rad bych tam měl i spotřebu atd. Na packach nemám reset ani šipky. Mohl by jste mi poradit co a jak dokoupit/dokodovat, aby to fungovalo? Diky moc za zpětnou odpověď

[@basrihaziri1181]

Sehr gutes video 👍 Ich habe eine audi a4 b8 2011 und hat keinen tempomat und möchte nachrüsten. Die original Teilenummer lautet 8k0 953 502 BC. Die Frage ist welches Teilenummer würde bei mir passen dass ich umrüsten kann??

[@safemero9821]

Hallo, ich habe das gleiche Auto aber 2010 . Hast du schon einen Tempomat nachgerüstet, was hat dich das gekostet??

[@jerrymel9177]

Wo bekomme ich einen Umbausatz dafür her?

[@KerryCZE]

Ahoj, díky za videa! Chtěl bych se jen zeptat, kde nejlevněji sehnat tu volantovou jednotku s packami a tím plastem, co se dává pod volant?

[@SirSkluzman]

ahoj, záleží co máš za auto (rok výroby, sedan nebo avant, máš tam multifunkční volant)?

[@KerryCZE]

SirSkluzman a4 Avant kombi, 2011. Multifunkční volant mam, ten jsem si koupil. Nicméně, díky tomu, ze tam neni správná ta jednotka, tak tlačítka nefunguji.

[@SirSkluzman]

wiki.ross-tech.com/wiki/index.php/Cruise_Control_Retrofitting_(8T)?fbclid=IwAR1GXuFY8znjml2iJ05bbbWFponte2HhooB0ccPsKQR6CkXm38cex8oiQTY

[@KerryCZE]

SirSkluzman super. Kouknu na to. Díky moc. :). Tempomat mi taky chybí. Skoda, ze to audina nemá uz v základu.

[@kolaus91]

Helo, my old radio has died, i instales a original used one, i was by Audi and they unlocked the radio, everything is working fine, but my steering wheel audio functiona are not working, do i need now to code my Steering Wheel with radio or what? Please answer me

[@dragonballgamer1456]

Yes you do

[@Radoslaw0718]

Welcome. Why do you have encoding error in module 16 in VCDS?

[@205chooser]

Because he has a non original cable and software.

[@thommetje46]

is a MFSW needed for cruise control? or does it also work with a non-mfsw?

[@SirSkluzman]

cruise control work without non-mfsw. but you need cruise control stalks + control unit which support cruise control. see wiki.ross-tech.com/wiki/index.php/Cruise_Control_Retrofitting_(8T)

[@przemyslawpajak78]

hallo. how can I find right stalks nr for my car ?

[@SirSkluzman]

if you dont have cruise control you need right stalk from model year of your car and Steering Wheel Control Module support cruise control - wiki.ross-tech.com/wiki/index.php/Cruise_Control_Retrofitting_(8T)

[@ukasz7509]

could you please provide the serial number of the cruise control lever?

[@SirSkluzman]

?

[@ukasz7509]

@@SirSkluzmannr OEM - Original Equipment Manufacturer

[@klaskapatrik]

Ahoj, je možné se osobně spojit ohledně dodělání tempomatu?

[@SirSkluzman]

Můžeme to zkusit :-)

[@SirSkluzman]

Napište mi e-mail nebo telefon

[@DeepMagas]

it's standart cruise control?

[@SirSkluzman]

Yes it is original audi cruise control

[@opc1299]

Hi why do you change your diagrams airbag?

[@SirSkluzman]

You mean airbag cable?

[@rowana8466]

@@SirSkluzman yes i am interested, why did you changed the airbag cable..?

[@SirSkluzman]

@@rowana8466 because I retroffited multi-function wheel too. It requied new airbag cable to transfer "signal" from buttons to control unit. But for cruise control only it does not need change airbag cable.

[@jackoglin1]

No wireing needed?

[@SirSkluzman]

I think no. For me only new cable to airbag

[@SmajlovicAdnan]

@@SirSkluzman why do you need new cable for airbag?

[@SirSkluzman]

@@SmajlovicAdnan because i install multi function buttons on steering wheel So i need new cable to transmit signál from buttons to control unit

[@SmajlovicAdnan]

@@SirSkluzman thanks for answer 😁