small tip, You can use a suction cup from a phone holder to centre the mirror
@edwinvalero666 Жыл бұрын
My S4 was doing this on the highway, dancing at high speeds so I will fix it using this method. Thanks
@geogeo1297Ай бұрын
Thanks Bogdan for your great advice ❤️🫡
@onenationundergod82 жыл бұрын
Thanks for this very thorough step-by-step instructions tutorial!
@dietermegert11043 жыл бұрын
Ty for this vid! I had the same problem on my passenger side mirror for weeks, and it was getting worse. Finally decided to check today before coming back from a business meeting (120km away). The mirror was literally only still attached by a small strip of the tape.. Bet it would have fell off on the way home! Now off to buy that tape.. Lol
@uwalakab3 жыл бұрын
Thank you for sharing this tip. Very kind of you. Will try this out. (Audi A6 Avant. Driver's wing started wobbling. They are heated mirrors.)
@makhanbasra96624 жыл бұрын
I have had the same thing happen to my Audi A4 Avant. I have brought some double sided tape extra strong and hope it don't fall off. Thanks for the video very helpful.
@darillgarcia39873 жыл бұрын
Hey bro what about the heater in your mirror? Does it still work?
@makhanbasra96623 жыл бұрын
Hi, The mirror is still able to melt the frost off and looks like it's working as normal. This has now been on for 1year so very happy with the result.
@inspektor.3 жыл бұрын
Thanks for tips, my right mirror fell off the highway yesterday and did some damage to the paint and side windows. This is a big problem with the Audi vehicles, now i have to buy a new one!! Imagine what it would be like if, say, a window was opened, very dangerously!! Audi A6 C7 4g
@BestCarMods3 жыл бұрын
I am surprised to see that it happened on a much newer car than mine and also that it came undone completely . Thank you for the feedback.
@milbr857 ай бұрын
Was it tested during summer and winter temperatures?
@BestCarMods7 ай бұрын
uk has no real summer or winter
@Ercolone695 жыл бұрын
Fantastic video my friend. I have the same issue and i'll try tonight
@CarcassGrater4 жыл бұрын
This just happened to my driver mirror. Thank you for the upload
@huntarget5 жыл бұрын
Hello Bogdan, Nice and helpful video tutorial. The same problem on the same side with my mirror. Can you tell me exactly what kind of 3M scotch tape did you used? Nearly the end of the video did you mentioned that mirror heating is operating automatically depends on outer degrees? I own a 2011 edition a4 b8 avant 2.0 Tdi and I have just realised that you mentioned that. Can you confirm this? Is this function available from MMI? I would appreciate your answer. THX, Emil
@BestCarMods5 жыл бұрын
1.Hi, I tried to find the exact type of tape that I used and it seams to be more difficult than expected. By the looks of it 3M uses the Scoth Trademark for some of there products and also by the looks of it they have changed recently there branding. So I would say go to a big DIY shop and see what they have on stock. In the past I have used "Gorilla Heavy Duty Mounting Tape Crystal Clear" or Bison. Almost all brands have the transparent gel like 1mm tapes. (you don't want something to thick and also you don't want something to thin). Don't worry to much on having the perfect tape, because you are applying on a big surface, any tape will hold. 2.The heating works automatically. I did not find any setting to turn it off. I have noticed that when you start the car the mirrors will get really hot and after that they will be warmish. Hope that it helps
@casarezc4 жыл бұрын
@@BestCarMods I have a 2011 Audi A4 and i recently realized that the if the dial switch for heated mirrors is turned to the left or right (not to the middle towards the heating ) the heater is turned off.i always kept the dial turned to the heater and that actually keeps your heater on the entire time. That is most likely what causes the mirror to detach over time. I realized this when I touched the mirror by accident when I noticed it was vibrating while driving, it was really hot. I turned the dial to the left and within 30 seconds it had cooled significantly. Most people don't know, but you don't need to have the dial pointed towards the heating symbol.
@BestCarMods4 жыл бұрын
@@casarezc if i remember correctly in all the test that i have done, it does not matter what the position of the switch is. the heaters will always start. Try to put the switch to one side and when you start the car in the morning check and let me know if they get hot. I remember that they got. I don't have an Audi any more and i can't check.
@hansfeuer3 жыл бұрын
Hey thanks!
@Julian-nl7vv3 жыл бұрын
Why didn’t you completely remove the glass + the back glass support? It is much easier to glue it when all is removed. It’s very easy to remove with your bare hands.
@BestCarMods3 жыл бұрын
That is a very good point. At the time I didn't think about it.
@Bnxzr3 жыл бұрын
This has happened to my Gold 1.6 TDI (14 plate) and my mirror is constantly vibrating and moving up and down and it’s at the point where i set it properly and it starts going upwards showing me the sky instead of the cars behind me, would all this work on my golf because I found the tools used
@BestCarMods3 жыл бұрын
Yes. VW Audi Seat Skoda, they all should be verry similar.
@Bnxzr3 жыл бұрын
@@BestCarMods perfect thank you. I’ll order the things u shown in ur video now :)
@AleksandarStosic5 жыл бұрын
Hi mate the same happened to me today. If you can leave the links of products you used.
@inspektor.3 жыл бұрын
Ne znam koliko je sve ovo sigurno... sa moje A6 C7 je juče na autoputu otpalo suvozacevo ogledalo i napravilo manju štetu na limu i bočnim staklima... Već sam reklamirao, izgleda da o ovome ćute u Audiju...zamislite da je prozor bio otvoren, a ogledalo poput gelera...
@AleksandarStosic3 жыл бұрын
@@inspektor. ja sam ga sam skinuo pošto se odlepio i zalepio opet. Ne prave ih više kao nekada. Sada prešao na X5, kvalitet je neuporedivo bolji
@Starflyer16094 жыл бұрын
Already happened to the drivers mirror and the right one. After fixed these glue the backside of the seat fell off. Audi uses bad glue....
@MojoPapiFPV5 ай бұрын
So the reason this is happening is because the factory adhesive is not good?
@BestCarMods5 ай бұрын
I would say that the main cause is that the mirror gets heated to many times. the factory adhesive does what it can do.
@paulburke96134 жыл бұрын
Mine fell off today on the motorway is this a common problem
@BestCarMods4 жыл бұрын
:( Sorry to hear that. See what you can find on ebay
@paulburke96134 жыл бұрын
BestCarMods got one for 11 quid
@scunnypedro4 жыл бұрын
Can anyone recommend any good tape to use for this?
@timignatov73944 жыл бұрын
3m double sided tape. Its what they use for spoilets and bootlids so you know it wont fall off on the motorway/highway
@Starflyer16094 жыл бұрын
If you have electric heated mirrors don't use tape...
@SilverHayze Жыл бұрын
@@Starflyer1609 what do you recommend?
@Starflyer1609 Жыл бұрын
@@SilverHayze thin layer of 2 component compound glue
10 ай бұрын
Why didn't you remove the plastic support, wasn't it easier?
@BestCarMods10 ай бұрын
you try and let us know
10 ай бұрын
@@BestCarMods every day I do this :))
@BestCarMods10 ай бұрын
good to know. will try that next time I have a audi. thanks@
@ajbadenhorst3 жыл бұрын
My rear view mirror vibrates when accelerating... Does anyone else have this issue and a possible solution?
@BestCarMods3 жыл бұрын
Is it the mirror or the plastics that vibrate. Try to identify if the hole assembly vibrates, maybe it is not clipped correctly to the screen. On my car you removed a plastic cover and after that twisted the mirror assembly to clip or unclip. If you had a screen replacement maybe that is when something when wrong.
@ajbadenhorst3 жыл бұрын
@@BestCarMods So when I got the car about a year ago, can confirm window was replaced, and thinking about it I agree with you it's probably where things went wrong. Had issue where automatic wiping would randomly come on when going over bumps since the plate that is glude to the window was loose. I got that fixed, automatic wipers worked, but saw the vibration. Something to note, the mirror is very very stiff to turn from direction, not sure if this is age related with the ball getting old? Tried to lube it up a bit and seems to have helped. Vibration normally starts when going though a certain rev range, can stop it by holding onto the outer plastic of the mirror.
@BestCarMods3 жыл бұрын
@@ajbadenhorst try removing it completely and see what looks out of place
@ajbadenhorst3 жыл бұрын
@@BestCarMods Took it off now, seems like main problem is the ball being super stiff. Throwing in oil doesn’t even help with the stiffness 😵