How did you replace the 3 rusted bolts/studs @3:51?
@jtscustomsNL Жыл бұрын
A lot WD40 and as you can see patience and a grinder 😂 after that we just used some regular hardware that fitted. Nothing special.
@dnices9354 жыл бұрын
Are you going to do the headlight facelift?
@jtscustomsNL4 жыл бұрын
Maybe in a far future, but fornow I leave them like this. But I will open them and do some cool things to them😎
@Δημητρης-δ3θ3 жыл бұрын
You put down pipe with out a racing catalyst?I mean you remove the factory one and you place another catalyst or not?
@jtscustomsNL3 жыл бұрын
Yess, check my other video on the exhaust. There you will see how we solved that!
@simon0573 жыл бұрын
Hey can you please tell me If you need a sealing between the flanges?
@jtscustomsNL3 жыл бұрын
Hello, yess you do need a seal between the metal surfaces. Otherwise it will leak.
@simon0573 жыл бұрын
@@jtscustomsNL can you tell me where to get a seal like this? I don’t know what i have to order… are they genuine parts or are they specific for the 2.0 tfsi?
@jtscustomsNL3 жыл бұрын
@@simon057 there are a lot of differant ones. Try contact an audi dealer/ parts shop. They can and will help you find the right one.
@simon0573 жыл бұрын
@@jtscustomsNL ah ok thank you
@simon0573 жыл бұрын
@@jtscustomsNL I tried to install my downpipe today but I didn’t manage to reach the bolts 😔. Didn’t think it would be so hard …
@dinky2643 жыл бұрын
Is this RHD and if so what’s the brand of the down pipe
@jtscustomsNL3 жыл бұрын
My car is LHD, I dont really know the brand as it is from ebay. If you search for Audi 2.0 TFSI downpipe, you should find it.
@dinky2643 жыл бұрын
Many thanks I’m trying to find a good one for a RHD
@khalifahvidal39592 жыл бұрын
I had to bend a LHD down pipe so that it fits my a5 it still rubs a bit on the steering column
@RoxusRemo2 жыл бұрын
Where abouts are you jacking from? I don't want to stick a trolley jack on the pinch welds in case they get squashed...
@jtscustomsNL2 жыл бұрын
At the audi there are 2 spots on either side that support the jack, it is not on the pinch so it will not get squashed.
@slader85433 жыл бұрын
hey i am considering getting an audi a5 2.0T just like yours the pre facelift model, but i heard that the pre Fl 2.0T have a big timing chain problem. Is that really such a big problem and is it expensive to maintain yearly?
@jtscustomsNL3 жыл бұрын
It is really an awesome car! The 2.0 TFSI are strong engines and I never heard of timing chain problems. There is one other problem that was fixed by audi which is the oil consumption. AUDI changed the pistons later on, so make sure the one you check out has this done to it. Maintenance isnt that expensive, I had to change the waterpump at around 300 euros and some brakes and new tires but nothing crazy
@slader85433 жыл бұрын
@@jtscustomsNL thanks for the feedback this really helps.
@fearlesspancake98173 жыл бұрын
@@slader8543 the tsfi and tsi engines do have timing issues related to the tensioner at around 80,000 to 100,000 miles
@Onnbekendd Жыл бұрын
@@jtscustomsNL ik ben ook aan het kijken voor een audi a5 pre facelift en ik hoor iedereen over olieverbuik. Nu zie ik wel audis te koop staan die claimen dat ze de zuigermodificatie hebben gehad alleen is dat al 7-8 jaar geleden gebeurt is het dan niet zo dat ze nu al weer olie gaan verbruiken?
@jtscustomsNL Жыл бұрын
@@Onnbekendd heyy, nee als de zuiger modificatie is gedaan zal het probleem wegblijven. Natuurlijk moet er verder wel goed onderhoud zijn gedaan. De aanpassing staat ook vaak in de boekjes of is bij audi na te vragen.
@jakobvarpe Жыл бұрын
Im trying to install a downpipe rn, how tf did u guys remove the bolt on the under/backside of the turbo?!
@jtscustomsNL Жыл бұрын
Magic🤣🤣 no just kidding, take a ratchet and a long extender. Feel where the bolt is and wrestle it on. It is a tight fit😬
@jakobvarpe Жыл бұрын
@@jtscustomsNL i actually got it! Now onto the 3 rusty bolts☹️
@jtscustomsNL Жыл бұрын
@@jakobvarpe awesome! You can do it🤣
@andreapatruno84304 жыл бұрын
it could fit on an audi a5 1.8 ? 2011
@jtscustomsNL4 жыл бұрын
Hi, i dont know if this would fit, best to just google your engine and then search for a downpipe to fit it.
@bensnodgrass92392 жыл бұрын
How the hell did you get that fourth screw off of the turbo and don’t ask which one I am talking about, you absolutely know the bastard I’m referring to haha
@jtscustomsNL2 жыл бұрын
Haha with a LOT of patience. We could move the ratched only a tiny bit at the time 😅 after the we replaced all the screws
@DeadLineBrother4 жыл бұрын
hoe heb je die chrome randen zwart gekregen? wrap?
@jtscustomsNL4 жыл бұрын
Ja dat is zwarte wrap!
@DeadLineBrother4 жыл бұрын
@@jtscustomsNL blijft dat wat zitten?
@jtscustomsNL4 жыл бұрын
@@DeadLineBrother ja de folie die ik gebruik houd heel goed. Ziet er nog steeds goed uit na een half jaar.
@fabricegabet90112 жыл бұрын
Hallo, ik ben verrast om audi a5 op video te zien. Ik ben de nieuwe eigenaar. heb je een herprogrammering van de motor gedaan, fase 1 of 2? heb je na de herprogrammering de complete RVS lijn geïnstalleerd? Met welk merk heb je het gedaan?
@jtscustomsNL2 жыл бұрын
Wat gaaf! De auto was voor dat ik hem kocht al gechipt luid de dealer. Ik weet zelf niet van welk merk of aanbieder. Ik was na de upgrades wel van plan om een tune te doen maar dat is er helaas nooit van gekomen. Hoe bevalt de auto verder?
@fabricegabet90112 жыл бұрын
@@jtscustomsNL Ik hou echt van de auto. Ik hou van het uitlaatgeluid. het rood lederen interieur is prachtig. de kracht is hetzelfde als mijn oude tts. Ik denk dat de a5 240pk is?
@jtscustomsNL2 жыл бұрын
@@fabricegabet9011 geweldig om te horen! Geniet van de auto!
@andreapatruno84304 жыл бұрын
where you buy it?
@jtscustomsNL4 жыл бұрын
It was a local company here in the Netherlands but you also find these on various other websites
@cleanedvento3 жыл бұрын
@@jtscustomsNL waar ergens zoek me gek achter een resonator delete voor de a5 ?
@jtscustomsNL3 жыл бұрын
@@cleanedvento dit is de link voor de downpipe www.chargertech.nl/downpipes-audi/1547-4818-audi-a4-a5-18tfsi-20tfsi-downpipe.html?gclid=Cj0KCQiAhP2BBhDdARIsAJEzXlF0c7rDOY_WTZHp56NRKzSHGOH8MkjHsswg-7eLsFn5-nHuIUEuGnEaAiGHEALw_wcB
@jtscustomsNL3 жыл бұрын
@@cleanedvento en dit is de link voor de resonator delete pipe www.extreme-carstyling.nl/fox/fox-middendemper-vervangende-pijp-o63-5mm-au120000-mer-419-audi-a5-8t-coupe.html?1=1&merk=800&type=92184
@Xanderdegroot4 жыл бұрын
Mooie videos man ,maar waar kan ik de parts vinden die jullie besteld hebben? misschien handig om voortaan in je description te zetten? en misschien ook brands te mentionen in je video? Super leuke videos hou het vol!
@jtscustomsNL4 жыл бұрын
Dankjewel! Ja dat is inderdaad een goede opmerking. Ik probeer dit vaak wel te doen. De onderdelen die hier gebruikt zijn komen van chargertech.
@TheSilentkill03 жыл бұрын
No check engine light ???
@jtscustomsNL3 жыл бұрын
Weellll first no.. and after 2 weeks yess😅😅 i will be sorting this out soon
@superlintran3 жыл бұрын
@@jtscustomsNL have you sort out the CEL?
@jtscustomsNL3 жыл бұрын
@@superlintran yess I did, check out my latest Audi Episode💪😁
@rexpontiusful2 жыл бұрын
Cool video, but using open end spanners on O2 sensors made me cringe. Get a good O2 sensor socket and your knuckels will be gratefull :)
@jtscustomsNL2 жыл бұрын
Thanks for the tip! A lot of knuckels were busted in the process😅😅
@mhvdm Жыл бұрын
Oh man I wish I had the money to do this.
@jtscustomsNL Жыл бұрын
This wasnt really that expensive, the total cost was around 250 euros.
@mhvdm Жыл бұрын
@@jtscustomsNL Oh really? I though it would be at least 600 Euros. But then again, in Norway it's illegal to modify the car like this, and there are many controls around vehicles so you might be able to get away with it for maximum 2 years before the next control, then you'd have to revert the entire process and put back the OEM exhaust, for a 1 hour control then again reinstall the aftermarket exhaust. I have the exact same car as in the video; Or I'm picking it up in around 1-2 weeks actually. So not here yet, but soon to come. And I really want to install Milltek or Armytrix exhaust on it. One thing I regret when buying it is the fact that it's FWD. One push on the accelerator now and the front tires spin and bang up and down. Can't wait to see if they explode when I add a stage 1 on it. 180hk > 260hk
@andreaesposto80943 жыл бұрын
Come hai rimosso il bullone interno inferiore al catalizzatore? Nel video non si vede purtroppo… che chiave hai usato? Da dove l hai raggiunto?
@jtscustomsNL3 жыл бұрын
Sorry I dont understand😅
@y7youngblood7b Жыл бұрын
Coolant was a lil low 😅
@jtscustomsNL Жыл бұрын
Good eye! We actually changed the waterpump after this because of a slight leak!
@y7youngblood7b Жыл бұрын
@@jtscustomsNL I have the same exact car, mines a 2011 and I also just did water pump, also had to do timing chains. Love the video btw, the comic relief did it for me lol
@kc5502 жыл бұрын
Lmao sounds like a little fish fart
@kevinpedersen52902 жыл бұрын
is this a tdi or a tfsi?
@jtscustomsNL2 жыл бұрын
It is a 2.0 Tfsi
@silivachungsum85892 жыл бұрын
Blow some cool air😂😂😂🤦🏽
@jtscustomsNL2 жыл бұрын
Will try it next time 😅🤙
@silivachungsum85892 жыл бұрын
@@jtscustomsNL does it fit on my Audi A4 b8 2008 1.8t and can I please get a link
@jtscustomsNL2 жыл бұрын
@@silivachungsum8589 I get this question a lot but I dont know for sure. The best you can do is google it, there are a lot of these on ebay
@bootneylee98023 жыл бұрын
You're installing a downpipe, but you haven't at least installed a cold air intake, intercooler or Stage 1 tune? GTFOH bro. 👉
@jtscustomsNL3 жыл бұрын
Thanks for the kind words😉 I did not say I was done, so make sure to subscribe to see those changes👉
@roddydykes70532 жыл бұрын
Who says you have to follow that particular order?