Audi A6 3.2 - Fuel Pump Replacement

  Рет қаралды 25,711

Kokouvia

Kokouvia

Күн бұрын

Пікірлер: 93
@tjanders9863
@tjanders9863 2 жыл бұрын
I’m changing a pump in a 2006 Audi A4 3.2 Quattro. Your video is very well done. You enjoy life and you promote a happy lifestyle. The world needs more people like you!! I wish you continued journeys in your Audi. GODSPEED my brother!!!!
@Kokouvia
@Kokouvia 2 жыл бұрын
I appreciate your comment brother 😃
@jasonhunt3495
@jasonhunt3495 8 ай бұрын
Great video brother. Appreciate how you even showed your struggles, which helps a lot of folks
@RomanTrollanski
@RomanTrollanski 3 жыл бұрын
11:30 yes... That's the players that I mentioned it to you about it on your previous video when you replaced the fuel line and you broke one of the tabs because you didn't had it at that time... I'm glad to see that I've contributed with something! :P
@Kokouvia
@Kokouvia 3 жыл бұрын
Oh yes you did. I added there pliers to my wish list on ECS Tuning thanks to the link you provided me. You made this possible bro. In fact I mentioned you in the description about this. 👍🏽👍🏽👍🏽
@RomanTrollanski
@RomanTrollanski 3 жыл бұрын
@@Kokouvia lol, just read the description. Now you also made me to watch it again and get that beer!
@2024-x4o
@2024-x4o 2 жыл бұрын
Hello my friend, my 3.2 fsi quattro 2008 gasoline A6 fuel pump started to fail. Error code showed Mechanical Malfunction P3043 Took it to workshop and they replaced the fuel pump, after driving home it started to fail a shutting down, error code now is Fuel Pump Circuit P3073 - 007 Electrical Malfunction Intermittrent After trying to use the coding basic settings it shows 00:05:28 Group 238 0.747 v 3.984 V What can I do?
@Kokouvia
@Kokouvia 2 жыл бұрын
Sorry about that. It is likely your new pump is dead too. Did they put the old fuel back in? Maybe it's what's killing the pump: bad fuel.
@2024-x4o
@2024-x4o 2 жыл бұрын
@@Kokouvia Gonna try to take it to the workshop, could this be also a relay problem?
@Kokouvia
@Kokouvia 2 жыл бұрын
@@2024-x4o It is possible that the fuel pump module connector got loose during the job. Check this out: kzbin.info/www/bejne/q5bJlIOeYsinfas
@2024-x4o
@2024-x4o 2 жыл бұрын
@@Kokouvia Thank you sir for the response, Im in the workshop, they checked the pressure and its ok at the begining but then it lows, gonna tell them about that
@donald6345
@donald6345 5 ай бұрын
Great job man. It helped me a lot today doing the same in my audi a6 avant 4.2 Only I did not torque the plasting ring enough so I had a big leak of gasoline 😵‍💫
@Kokouvia
@Kokouvia 5 ай бұрын
@donald6345 I appreciate. I am glad it was helpful. Sorry for the trouble.
@headealer
@headealer 6 ай бұрын
Hi Guys !!! Amazing video...y started also de adaptation...but i dont understanda how to stop it. I have to go to the same option and select off ?..or only drive until Stop.._>? ..Txz in advance !!!
@Kokouvia
@Kokouvia 6 ай бұрын
You don't need to stop it. You can quit and disconnect the scanner a few minutes after starting the adaptation. Mine behaved the same way.
@PVflying
@PVflying 3 жыл бұрын
Great video Keli - your productions get better and better 👍 Greetings from Arboga, Sweden 🇸🇪
@Kokouvia
@Kokouvia 3 жыл бұрын
I appreciate MrCurry 😁
@dikeemmanuel7716
@dikeemmanuel7716 Жыл бұрын
Please my Audi a6 2008 battery flats out every morning,any fixed
@Kokouvia
@Kokouvia Жыл бұрын
kzbin.info/www/bejne/f3WXkIpod9N8q5o
@haydencarter5582
@haydencarter5582 5 ай бұрын
I broke one of the fuel lines because I pulled to hard to get it out and ripped it clean off how can I replace the fitting?
@Kokouvia
@Kokouvia 5 ай бұрын
@@haydencarter5582 You can't replace the fitting. You have to replace the full line: kzbin.info/www/bejne/nZ-7kHdjqNqNh7s
@haydencarter5582
@haydencarter5582 5 ай бұрын
@@KokouviaI’m going to try and find a way to get another fitting I’ve tried buying some but they are all to short or a little to big if I find one that works I will let you know but thanks for all of these videos I will probably just order a new line how long is the job to do the fuel line?
@Kokouvia
@Kokouvia 5 ай бұрын
@@haydencarter5582 An hour or so.
@haydencarter5582
@haydencarter5582 5 ай бұрын
@@Kokouvia thank you I was really scared my car wasn’t gonna be running any time soon what year is your audio I have the 2005 Audi a6 3.2
@Kokouvia
@Kokouvia 5 ай бұрын
@@haydencarter5582 Mine is a 2005 Audi A6 3.2 as well.
@dikeemmanuel7716
@dikeemmanuel7716 Жыл бұрын
How can I contact u, I ve this vehicle,my pump is bad ,so I changed it ,I noticed that my guage reading is wrong and there is always fuel in the other tank but my car still stalls,it's audi a6 c6 quattro 3.2
@2024-x4o
@2024-x4o Жыл бұрын
Hello sir, me again, workshop replaced twice the new fuel pump and also fuel control module, the car keep losing fuel pressure and shutdown, they erased the codes, apparently they cant run basic settings because they do not have the vagcom scanner. Could you suggest me another idea? Thank you sir
@Kokouvia
@Kokouvia Жыл бұрын
Really sorry about that. Maybe it is the high pressure fuel pump? Video: kzbin.info/www/bejne/bJqWk6irfdyafpY
@2024-x4o
@2024-x4o Жыл бұрын
@@Kokouvia Thank you sir, gonna tell them
@2024-x4o
@2024-x4o Жыл бұрын
@@Kokouvia would it make a difference if I run basic settings with my vagcom?
@Kokouvia
@Kokouvia Жыл бұрын
@@2024-x4o It is worth trying but I doubt it will fix that issue. I remember a friend with the A4 3.2 had a similar issue. He replaced the fuel pump in vain. I gave him my old high pressure fuel pump which he had his mechanic install and that fixed the problem.
@2024-x4o
@2024-x4o Жыл бұрын
@@Kokouvia alright sir, gonna tell them, thank you Do the high pressure pump shows codes? Or it will never advise?
@familieverhoeve7127
@familieverhoeve7127 2 жыл бұрын
My car also takes 3-4 seconds to start, sometimes the second attempt on a cold engine. Warm engine starts in 1 second. I wonder, does the car have 1 or 2 crankshaft sensors ? I replaced the camshaftsensors and 1 crankshaftsensor, driverside. Replaced sparkplugs and coils but no improvement. Replaced the high pressure fuelpump, no improvement in starting. So, is there a second crankshaftsensor ? Or should I replace the fuelpump ?
@Kokouvia
@Kokouvia 2 жыл бұрын
Any fault codes? I showed the actual crankshaft position sensor in this video: kzbin.info/www/bejne/aJ_KqppnlrGij7s
@familieverhoeve7127
@familieverhoeve7127 2 жыл бұрын
@@Kokouvia No fault codes. So, I am thinking sparkplugs or fuelpump. I ordered new spark plugs, maybe the ones I put in 6 months ago are the wrong ones. If new sparkplugs not fix the problem I might order a new fuelpump...unfortunately these are expensive.😪
@Kokouvia
@Kokouvia 2 жыл бұрын
@@familieverhoeve7127 Did you watch this? kzbin.info/www/bejne/g3PWiaJtgtWEhNE Check whether your purge valve is ticking.
@khayazikhali9340
@khayazikhali9340 2 жыл бұрын
Hi, i would like to know more about these pipes. I see a leak though it's very tiny drops. So where I stay the car touches the concrete everytime we going in or out of the parking. Under the passanger front door there are 3 pipes one is with the clamp. So they are plastic/ rubber connecting to a metallic coiled look like pipe, that's where the leak is
@Kokouvia
@Kokouvia 2 жыл бұрын
I don't understand. What is leaking?
@khayazikhali9340
@khayazikhali9340 2 жыл бұрын
@@Kokouvia it's leaking where two pipes are connected metal and rubber pipes, it looks like it's 3 fuel pipes underneath front passenger side.
@Kokouvia
@Kokouvia 2 жыл бұрын
@@khayazikhali9340 You probably damaged either fuel lines or/and brake fluid lines. This is not good 😕
@RomanTrollanski
@RomanTrollanski 3 жыл бұрын
I am wondering if a longer and longer cracking time especially at cold is why my Audi it's acting up like that... I have 210k with it, sometime in the morning takes up to 3 seconds cranking time to start, this behavior it's quite new and it's getting annoying. When the engine it's hot, no issues at all, starts like out from the factory. No error codes either, any thoughts?!
@Kokouvia
@Kokouvia 3 жыл бұрын
To be honest, I am not sure what it could be. With no codes, it is difficult to guess. The first thing I would blame would be the fuel pump starting to fail though but with no certitude. Do you hear it prime fuel when you open the driver's door or turn the ignition on when cold?
@RomanTrollanski
@RomanTrollanski 3 жыл бұрын
@@Kokouvia I do hear it, usually starts fine if the engine it's warm, and it does fine most of the time. Overnight if left, at start cranks up more than usual... Makes me think that it's loosing pressure in the system some place... I'll probably do the fuel pump and see where it goes...
@nicolaelupascu9904
@nicolaelupascu9904 3 жыл бұрын
Nice work buddy,I think I have the same issue as you,however I have to investigate first the fuse and relay but I don’t know where they are if you can help me with that will be much appreciated. I don’t know if it has anything to do with the fuel cut but before the car stop and don’t want to fire up just crank the oil light pressure comes on and the car stop working. I was thinking that there is a kind of safety thing that the computer stop the fuel if doesn’t receive the signal from the oil pressure sensor.
@Kokouvia
@Kokouvia 3 жыл бұрын
Thanks. The first thing to do would be to scan the car for faults. This will point you to the right direction. The fuel pump fuse is located on the passenger's side. It's the first one on the left in the bottom row. You can see me remove it in this video: kzbin.info/www/bejne/mnW0YWNsnbt0jKM at 5:25 The fuel pump control module is next to the fuel pump under the rear seat bench. I have shown it in this video.
@nicolaelupascu9904
@nicolaelupascu9904 3 жыл бұрын
@@Kokouvia the car doesn’t have any fault codes at all,just all of a sudden the car stalls and die fallowing by the engine oil light and from that point don’t want to start at all. I will check the fuel pump fuse and try to see if the fuel pump under the rear seats it’s working.
@Kokouvia
@Kokouvia 3 жыл бұрын
@@nicolaelupascu9904 What kind of scanner are you using? There has to be at least one engine fault code.
@nicolaelupascu9904
@nicolaelupascu9904 3 жыл бұрын
@@Kokouvia normal scanner which was working before and help me to identify the issues. Check the fuse pump today and it’s good,the pump it’s working if I power it straight from the battery and the car starts first time,there is no power coming to fuel pump and i am wondering if it’s any sensor that stop sending signal to the computer and the computer cut the power to the fuel pump. I am trying now to locate the fuel pump relay to see what’s going on in there. Thank you
@2024-x4o
@2024-x4o 3 жыл бұрын
My friend I filled the gasoline tank full in my A6 3.2 fsi 08, and the computer says I have 650 km, I saw you got around 900-1000km with the full fuel tank? Is this normal? 😢
@Kokouvia
@Kokouvia 3 жыл бұрын
650 km is good for in town driving. 1000 km or more is achievable when driving a very long distance and being very gentle with the gas pedal. You are fine 👍🏽
@2024-x4o
@2024-x4o 3 жыл бұрын
@@Kokouvia Thank you very much again, I feel better now, have a good day!
@Kokouvia
@Kokouvia 3 жыл бұрын
@@2024-x4o Thanks. Likewise 😊
@Armyvet12
@Armyvet12 2 жыл бұрын
Do you have a link for that tool to remove the ring?
@Kokouvia
@Kokouvia 2 жыл бұрын
Yes, it's in the description.
@Armyvet12
@Armyvet12 2 жыл бұрын
@@Kokouvia appreciate it so much! I didn't even look! Have an '05 A6 4.2l quattro and it's just not wanting to start. It's cranking starts for a good 5 seconds and dies. Computer said it was a crankshaft sensor error.. replaced both cam and crankshaft sensors, gave her new spark plugs and coils. She started right up sounded beautiful and died about 5 seconds again. Dumped that fuel filter out and it was just pure black tar substance... We're getting a new fuel filter Wednesday and Hoping this will fix it... If not, next down our list is fuel pump... any advice would be appreciated!
@Kokouvia
@Kokouvia 2 жыл бұрын
@@Armyvet12 I am not familiar with the 4.2L but as far as I know, a bad fuel pump would trigger a code which it is not so your fuel pump might be just fine. Crankshaft errors can suggest not a bad crankshaft or camshaft sensors but an engine timing issue. The engine would stop itself to prevent damage which might be happening. Did the same codes return after you changed the sensors?
@Armyvet12
@Armyvet12 2 жыл бұрын
@@Kokouvia I haven't taken it back to a shop with a computer yet again. My boss and I have been putting the wrench time in.. well.. mostly bossman and I just youtube and google sht... lol! I'll be first one humble enough to admit I'm mechanically retarded and don't know sht bout cars...that's why I always pay big bucks to big guys to fix it.. lol
@Armyvet12
@Armyvet12 2 жыл бұрын
@@Kokouvia you think replacing the fuel filter will work? (Fingers crossed 🤞)
@RebeccaChamberss
@RebeccaChamberss 3 жыл бұрын
Hi I have a problem with running the engine and fault code G419 sensor - Low Pressure Fuel Sensor. Engine starts up but takes maybe 4-5 seconds. The next start of the engine is normal. Do you think there is a problem with the fuel pump? I have the same engine. P2543 - 009 - Intermittent - Intermittent Freeze Frame: Fault Status: 00100100 Fault Priority: 2 Fault Frequency: 1 Reset counter: 0 Mileage: 0 km Time Indication: 0 Freeze Frame: RPM: 2112 /min Mass Air / Rev.: 288.9 mg/str Temperature: 85.5°C Part Throttle Pressure: 4.9 bar Speed: 25.0 km/h
@Kokouvia
@Kokouvia 3 жыл бұрын
What is the age and mileage of the car? By the way G419 cannot be the low pressure fuel sensor. Are you sure this is correct?
@RebeccaChamberss
@RebeccaChamberss 3 жыл бұрын
@@Kokouvia Sorry, my fault, code G410 Error code from VCDS 1 Fault Found: 18975 - Low Pressure Fuel Sensor (G410) P2543 - 009 - Intermittent - Intermittent Freeze Frame: Fault Status: 00100100 Fault Priority: 2 Fault Frequency: 1 Reset counter: 0 Mileage: 0 km Time Indication: 0 Freeze Frame: RPM: 2112 /min Mass Air / Rev.: 288.9 mg/str Temperature: 85.5°C Part Throttle Pressure: 4.9 bar Speed: 25.0 km/h Mileage: 231000km, years 2005
@Kokouvia
@Kokouvia 3 жыл бұрын
@@RebeccaChamberss Thanks for confirming. Do you know when the fuel filter was last replaced? I would suggest replacing the fuel filter then run the fuel pump adaptation. It is Engine, Basic settings, Channel 238. It must be performed when the engine is running. I suggest doing your typical driving routine while the basic settings is running. A couple hours of driving should be enough. Note that the A/C will not work while the basic settings 238 is running. This should normally fix the issue. May you please try this and report back?
@RebeccaChamberss
@RebeccaChamberss 3 жыл бұрын
@@Kokouvia fuel filter was replaced 10000 km ago. Ok i will try with basic settings.
@RebeccaChamberss
@RebeccaChamberss 3 жыл бұрын
@@Kokouvia nothing change after basic settings, still the same error code.
@156nunez
@156nunez 2 жыл бұрын
Hey where's the control module?
@Kokouvia
@Kokouvia 2 жыл бұрын
I showed it at 35:25
@jasonpatterson7266
@jasonpatterson7266 3 жыл бұрын
I love it my friend. Nice work as always. I hope I don’t have a failed fuel pump anytime soon. You have done a lot of good work on your car. That was almost a disaster when you rolled the car out of the garage. Hilarious!! Take care buddy.
@Kokouvia
@Kokouvia 3 жыл бұрын
Thanks! Fingers crossed for you. Haha yeah, that was scary 😅
@MNMN-kg1it
@MNMN-kg1it 3 жыл бұрын
The question is how to take the (silver) motor out of the housing.Good work.
@Kokouvia
@Kokouvia 3 жыл бұрын
Thank you 😄
@spacex2323
@spacex2323 Жыл бұрын
Good job.But new pump is far more bad product like plastic can for icecream
@calcionopallone
@calcionopallone Жыл бұрын
well done bravooooo
@Kokouvia
@Kokouvia Жыл бұрын
Thanks 👍🏾
@calcionopallone
@calcionopallone Жыл бұрын
@dikeemmanuel7716
@dikeemmanuel7716 Жыл бұрын
Abeg I need this fuel pump
@alfredoadame2219
@alfredoadame2219 3 жыл бұрын
Did i heard you fart at 25:16
@Kokouvia
@Kokouvia 3 жыл бұрын
No it's the seat squeaking 😅
@alfredoadame2219
@alfredoadame2219 3 жыл бұрын
I like your videos man keep it up!👌🏽
@spacex2323
@spacex2323 Жыл бұрын
150
Audi A6 3.2 - Vacuum Power!
38:57
Kokouvia
Рет қаралды 8 М.
How does a fuel delivery module work? (3D animation)
3:16
Motorservice Group
Рет қаралды 946 М.
УНО Реверс в Амонг Ас : игра на выбывание
0:19
Фани Хани
Рет қаралды 1,3 МЛН
24 Часа в БОУЛИНГЕ !
27:03
A4
Рет қаралды 7 МЛН
How to have fun with a child 🤣 Food wrap frame! #shorts
0:21
BadaBOOM!
Рет қаралды 17 МЛН
How to Diagnose and Replace a Fuel Pump
13:58
ChrisFix
Рет қаралды 6 МЛН
Why You Shouldn't Own an Audi
22:21
speedkar99
Рет қаралды 297 М.
Audi A6 3.2 - A/C Compressor Replacement after Black Death
48:27
Common sign of bad fuel pump
6:21
haile auto garage
Рет қаралды 219 М.
Fuel gauge not working on an Audi A6 *FIXED*
3:01
DIYDaly
Рет қаралды 73 М.
C7 Audi A6 3.0T Low Pressure Fuelpump Install
26:06
C Midas
Рет қаралды 7 М.