The car made a clicking sound when turning corners and bends which was fixed by replacing the driveshafts.
Пікірлер: 50
@danluttrell10 ай бұрын
Good overall video. Seems like it might be easier to just remove the wheel bearing (and replace it while you're at it) and slide it right out but maybe I'm missing something. Also, I find it easiest to loosen the axel hex bolt with the wheel still on, remove the center cap, and loosen it a bit, then when you get the wheel off it is much easier to deal with. BTW those axel bolts are a one-use item (Torque to Yield) and should be replaced every time it's disassembled AND I find that some cheaper off-brand parts have a longer bolt that may not meet spec.
@ctxgodsarmy Жыл бұрын
Thanks for making the video!! Lots of help
@tonynorth52784 ай бұрын
There is a metal shroud over the top of the drive shaft fixings gearbox end that needs to be removed/loosened before moving the shaft assembly to the left side
@sinaniii2 жыл бұрын
Awesome video! could you please tell me the torque spec for the 6 bolts plus the one on the front? thank you.
@jusko1114 ай бұрын
Thank u mate❤❤❤
@kalamaali72824 ай бұрын
Great video. I have recently bought the same car. Knocking sound though only when reversing and turning wheel to the right. Makes the noise intermittently under passenger footwell. CV joints got replaced in Jan before I bought it. Is the change you did on this video different from changing the CV joint? Sorry if that makes no sense I have extremely limited knowledge of car mechanics. 😂
@Zaakir044 ай бұрын
Hi, yes I had the same issues, I replaced the whole drive shaft as it was more cost efficient. The issue you are having is with the inner cv joint.
@Zaakir044 ай бұрын
There are two cv joints I believe, inner and outer. I replaced the outer on mine but it ended up being the inner joint. So it’s best to do the whole drive shaft. I bought mine from GSF
@kalamaali72824 ай бұрын
Really appreciate this and going to try and claim on my warranty. Thanks again.
@Zaakir044 ай бұрын
@@kalamaali7282no problem, please like and subscribe
@fainy1723 Жыл бұрын
Hello, what specificatikn of car you've got? Engine, gearbox, drivertain. Depending on that the required parts may be different.
@danielluttrell78477 ай бұрын
He says what year and model at the beginning of the video but you need to check the exact fit regardless. There is also conflicting information on this half axel part from various suppliers as the part numbers have changed for Audi/VW over the last few years.
@RoxZat-19973 ай бұрын
What size are the bits?
@dieselhead5891 Жыл бұрын
It seems good why did you replaced it and what are the symptoms you noticed?
@Zaakir04 Жыл бұрын
Clicking sound when turning. Very loud
@selimsamir82742 жыл бұрын
Hii are the same left and right
@razoruk15202 жыл бұрын
Thanks for this, I believe i may have a driveshaft issue... i have a strange noise which sounds like a "wow, wow, wow" noise at low speed and within the 1500/2000rpm range.. it seems to get louder going up hill and when the car is warm too.. do you know if this sounds like a draftshaft or maybe a gearbox issue? You can hear the noise clearly in the passenger footwell, but from the drivers perspective it sounds more central, as you may know sounds travel weirdly in cars.. I have had the CV joint and wheel bearing replaced the passenger side too.. any help I would greatly appreciate it.
@Zaakir04 Жыл бұрын
I believe it sounds like a gearbox issue. Probably a worn out gear of flywheel.
@razoruk1520 Жыл бұрын
@@Zaakir04 Thanks for this.
@exponentialhorse Жыл бұрын
Did you get it sorted mate? I've got a friend who's got the noise like you are describing, just in his case it seems to be coming from the back of the car and doesn't really match the speed of the tyre rotation
@margaretkennedy59066 ай бұрын
where are you base , maybe get you to do mine if you not far away im base in london
@Zaakir046 ай бұрын
Hi, I’m based in Milton Keynes
@shubnabegum84209 ай бұрын
Hello brother what would it cost me to replace this was wondering if you would know?
@shubnabegum84209 ай бұрын
Got a a6 64plate c7
@Hitngan5 ай бұрын
@@shubnabegum8420Same as me, did you get a price for it?
@jalapep5032 жыл бұрын
That’s a weird place to have a driveshaft loll (should be cv axle replacement)
@MiistarAddil2 жыл бұрын
Is this a common problem with these types of Audis?
@Zaakir042 жыл бұрын
Yes, it is common on the A6 and A7
@K14RUK2 жыл бұрын
Good video. Wondering where did you get your replacement driveshaft from?
@cornholio45102 жыл бұрын
ebay amazon autodoc
@Zaakir042 жыл бұрын
GSF Carparts
@davidredmond19820009 ай бұрын
Are them 6 bolts definitely loosened clockwise? 1:48
@tonynorth52784 ай бұрын
No, anti clockwise. lefty loosey righty tighty.
@davidredmond19820004 ай бұрын
@tonynorth5278 yeah thought that, moron in the video giving wrong info
@dennisradu39025 ай бұрын
Can you tell me the brend? thank you
@Zaakir045 ай бұрын
This was bought from a company called GSF
@rayromych553410 ай бұрын
If I need to change just outer CV joint - would I have to do all this as well?
@Zaakir0410 ай бұрын
No, you can replace outer cv joint without replacing the full drive shaft but then you run the risk of the inner cv joint being bad too.
@Zaakir0410 ай бұрын
If you unclip the outer cv boot, then you can slide the cv joint off and replace it. You may need a new boot which are not easy to put on.
@rayromych553410 ай бұрын
@@Zaakir04 Sorry, I mean do I need to take out whole drive shaft to only replace outer cv joint
@Zaakir0410 ай бұрын
@@rayromych5534no, you can do it with only half of it off. Do everything in the video but don’t take it off from the inner pats. Just take the driveshaft out of the hub and you can replace the cv joint. Then put it back in to the hub and put everything back together like the hub bolt, track rod end, anti roll bar link and the lower control arm bolts.
@rayromych553410 ай бұрын
@@Zaakir04 Cannot do it without undoing upper bar, and cannot undo the upper bar as it has bolt seized :(
@HaiderAli-qn2ec2 жыл бұрын
I changed my cv joint still clicking do i need to do what u done here?
@Zaakir042 жыл бұрын
Hi, that’s the issue I had. Replacing this fixed it for me. So you might want to do the same.
@HaiderAli-qn2ec2 жыл бұрын
@@Zaakir04 could u help me out to a link to the part ?