Useful video. 2015 b8.5 s5, 115k km. Epc light came on, and the car started shaking with a loss of power. Parked, turned on/off fixed the issue. I think it's time for a basic tune-up(spark plugs ect) it could be carbon build-up also.
@simonb5401Ай бұрын
Wow Same thing happened to me 7 days ago with my 2015 Audi q5! I wish i came across this video sooner. I got mine towed to the Audi dealer and now they are talking about a rotor wiring issue
@VlogbobbАй бұрын
@@simonb5401 what ended up happening? Got it fixed? Did it fixed the issue? I'm still driving with no problems since that day.
@simonb5401Ай бұрын
@Vlogbobb hey, as it turned out the dealer said a rodent, most likely a rat/mice chewed a wire connector. And my fuel ump module was bad. Its running now, but soon i will try and get a tune up done
@jerichotm21226 ай бұрын
Now its crystal clear! Thank you!
@HonestMechanicChannel6 ай бұрын
Glad it helped!
@airjoshy8 ай бұрын
Very helpful thanks 🙏🏾
@HonestMechanicChannel8 ай бұрын
Glad it was helpful!
@johncanas2245Ай бұрын
Hello love your videos , audi a2 owner and my ESP light comes out after some period of driving,I feel no difference at all , no power loss or such. If i switch off and on the engine it goes away,and rarely comes back happens at least once a day. What could be the fault? Thanks
@NateHoffman-22526 күн бұрын
I have the same thing in my Audi a6, no clue what it is
@dylandalka87008 ай бұрын
I have an Audi s4 b8.5 and was driving home around 75mph. I went to pass a car and didn’t punch it but when my car downshifted is when it threw the code and started to shake. I turned it off and back on and I took it easy home. Any idea on this?
@HonestMechanicChannel8 ай бұрын
Hi, honestly, it's difficult to determine, but since the code disappeared after turning it off and back on, it might indicate something is starting to fail but hasn't completely gone bad yet, such as the spark plugs. The best approach would be to scan and check the code your S4 stored.
@dylandalka87008 ай бұрын
@@HonestMechanicChannel So it showed a misfire in cylinder 1 and 3 I just changed the plugs and coils for those and haven’t got anything yet. I think I’m going to change PCV soon.
@tenierloma8 ай бұрын
Hello, my Audi Q5 2012 has this problem, the spark plugs and coils were changed and they scanned it and it doesn't show any faults, it vibrates sometimes other times it works well and it doesn't start well, it's time to accelerate
@dylandegnan44973 ай бұрын
My engine light came on and I have obd2 carista and codes are 21388 fault code - Exhaust door valve 1: Open circuit I’ve taken off the wire at the exhaust on both sides then the 2nd came up blown in them to clean desert and 1 open circuit driver side is still faulty not letting me reset EPC came on car was shaking and loud and kept driving engine light came on saying misfire as I kept driving for 5 mins only when in sports mode snd stopping the gas hard
@JD-ue5jhАй бұрын
HOW about when its cold out and i start my car, EPC light comes on but after driving a bit and waiting for the engine to warm up. I turn it off and then turn it on and EPC light is no longer there! what could it be?
@EricaGonzalez-t5k10 ай бұрын
Hello, I have an Audi 6 2017. EPC goes and comes, I have taken it to two mechanics no codes are shown. Aside from the tips provided, any suggestions on what it can be?
@HonestMechanicChannel10 ай бұрын
Hello there, is the light comes and goes on startup or while driving? are there other symptoms alongside the light?
@EricaGonzalez-t5k10 ай бұрын
Hello, sometimes it comes on when I turn on the car, sometimes while I’m driving. Only when the EPC light is on, it will display Stop-start function non available.
@bryangomez674010 ай бұрын
I had the same thing at first check engine with cylinder miss fire and EPC light I changed fuel injectors and carbon cleaning for the check engine. For EPC I replaced a damaged cable that went to the gas pressure fuel. After that the car felt better but still had EPC going on in the high way. I had done an oil change at home and guessing by lifting the car up it activated the EPC so I did a EPC reset I seen on a website. After that no EPC light hope this helps!
@EricaGonzalez-t5k10 ай бұрын
It comes on when the car comes on and sometimes if it didn’t while the car is on. No other codes come on or any other signs of car destress
@G23sports8 ай бұрын
I have a 2015 A3. EPC has been coming on and off for about 350 miles. Same with check engine. I had codes read and got multiple. P0236 (said moderate issue). P0606, P0106, P0192 (said these were major issues). Any idea? Thanks!
@salvatorej.quaglieri77926 ай бұрын
With mine if I hard accelerate the EPC light comes on and it shakes bad and misfires, the code I get is for cylinder 2 misfire.. however I can shut the car of and drive fine and the engine doesn’t shake.. it only does this when I put the pedal to the floor. I also replaced that cylinder plug and coil pack and still have the same issue.
@HonestMechanicChannel6 ай бұрын
Hi, The symptoms you describe suggest there could be an issue beyond just a faulty spark plug or coil pack in cylinder 2. Since replacing these didn't resolve the problem, you might be dealing with fuel delivery issues, a clogged fuel injector, or a more complex electrical or sensor-related problem. Given that the issue occurs under hard acceleration, it could also be related to inadequate fuel pressure or air intake issues. My bet is on a bad fuel injector on that cylinder
@salvatorej.quaglieri77926 ай бұрын
@@HonestMechanicChannel ok thank you, I believe it to be a fuel injector as well. It has 112,000 miles.
@konstantin-big6 ай бұрын
Hello You can take out the fuel injector from cylinder nr-2 and place that to another cylinder If the error code is on that cylinder then the problem is the fuel injector
@josuecruz5327Ай бұрын
you ever figure out what it was?
@salvatorej.quaglieri7792Ай бұрын
@@josuecruz5327 I haven’t change it out yet but I believe it’s a clogged injector, I have about 116,000 miles on it. I’ll definitely post an update when I fix it.
@JoseLopez-hc5kk2 ай бұрын
My Audi a5 struggles to turn on and epc light comes on but when it turns on fast it doesn’t come off what can it be
@ToXyCoLoR7 ай бұрын
Petrol, 2.0 tfsi 211hp. EPC doesn apear every time when i put ignition. It s need to try beteeen 5 and 20-30 time to EPC apear . I noticed that after a longer trip, the EPC no longer appears when I try to restart. and gives me error TPMS, ESP, ABS, gear box and headlight adjustment. I have an error on almost all modules when I scan with VCDS. I'm interested if you experienced something like this, where the problem came from. when the car is started, it runs flawlessly, it doesn't jerk, it doesn't slow me down at speed.
@adrienzeqaj013 ай бұрын
I have an audi a6 2.7t 2004 and when you push the throttle it loses power and the epc shows up, you have tu turn off the car to be able to walk
@percyjenkinsjr77414 ай бұрын
I have an 2013 adui q7 and i changed the throttle body and i was still having the same problem. My q7 is supercharged so could it be that? I noticed a small throttle body in the supercharger but i haven't tested it yet
@HonestMechanicChannel4 ай бұрын
Hi Percy, can you provide more info please so I can give the best answer possible. are you getting any codes? what does your car do?
@officialdomigod39420 күн бұрын
The throttle body need to be relearned to the car after installation. Otherwise it won’t communicate properly
@9993bhavish8 ай бұрын
Can bad fuel quality raise epc warning? Im having same with my a5 2012 engine oil consumed very fast
@HonestMechanicChannel8 ай бұрын
Yes, bad fuel quality can indeed trigger an Electronic Power Control (EPC) warning light on your dashboard because poor fuel can affect the engine's performance and emissions. However, fast oil consumption is typically unrelated to fuel quality and may indicate other issues such as leaks (internal or external), worn piston rings, valve seals, or a problem with the turbocharger. Do you have an OBD scanner?
@9993bhavish8 ай бұрын
Been 2 month since i bought my a5 from a friend engine oil was topped up after 2 months ive been unlucky as there was a mixture of diesel in my fuel tank and when i went to a garage he said only 500ml of oil remained in the engine. Could this oil consumption have happened due to the diesel mixed with petrol
@9993bhavish7 ай бұрын
@@HonestMechanicChannel is their a specific code that the obd scanner shows for the worn out piston rings?
@9993bhavish7 ай бұрын
@@HonestMechanicChannel you think i should use a thicker engine oil since my audi is above 115,000 km
@Piligrim_ODESSA8 ай бұрын
Hello, I have codes p2293, p0343, EPC indication. I checked the camshaft marks, everything is fine. accelerates poorly at low engine speeds, after 2500prm, as if a second wind appears and the car begins to accelerate. Thanks
@HonestMechanicChannel8 ай бұрын
Hi Piligrim, managed sort it out? these codes can also be caused by the following 1. VVT Solenoid 2. Faulty fuel pressure regulator 3. Clogged fuel filter 4. Malfunctioning camshaft position sensor 5. Wiring issues related to the camshaft position sensor
@Piligrim_ODESSA8 ай бұрын
Thanks a lot. I changed the fuel filter, changed the camshaft sensor, tried the working car, checked the wires, supplied 12 volts to the solenoid, it reacts. ordered another high pressure pump
@Piligrim_ODESSA8 ай бұрын
@@HonestMechanicChannel Thanks a lot. I changed the fuel filter, changed the camshaft sensor, tried the working car, checked the wires, supplied 12 volts to the solenoid, it reacts. ordered another high pressure pump
@Piligrim_ODESSA8 ай бұрын
@@HonestMechanicChannel I’m also thinking of checking the oil channels of the phase regulator control and the phase shifter
@Piligrim_ODESSA7 ай бұрын
I solved the problem. there was a problem with installing the chain between the camshafts, one tooth
@lifeisfunsosmile2 ай бұрын
Mine came on today when driving in the rain. It went into limp mode on the motorway. I turned the car off and back on again and the car drove ok with no lights on and i continued the remaining 43 miles of driving. How can I diagnose this please with no engine light or epc light on the dash now?
@josephrypinski33352 ай бұрын
this exact thing just happened to me. turned the car back on and hopefully i can make it back for the last hour of driving
@raminm.19263 ай бұрын
Hi, Audi A4 2013 about 75000 miles, when the car is still cold it is no problem and the EPC light is off. If I drive for almost half an hour, stop and turn off the engine, if I turn it on back again usually the EPC light comes on and stays on. But there is no shaking or loss of power or anything noticeable in driving. Any advice what may the cause be?
@HonestMechanicChannel3 ай бұрын
Hi, Since this happens after a while, Since it only appears after driving for a while and restarting, it might be related to a sensor or electronic component that malfunctions when hot. Common causes include: Throttle Body Issues: Dirt or malfunction in the throttle body. Faulty Sensors: Issues with the mass airflow sensor (MAF) or crankshaft position sensor. Let me know how it goes!
@raminm.19263 ай бұрын
@@HonestMechanicChannel Thank you for your response. a basic OBD check shows engine fault 18062 Coolant Pump B control circuit/Open. Is that related?
@mbachimwale6 ай бұрын
Hello i have an a3 2011 s line epc comes on when I accelerate hard but goes off when normal.....what could be the issue?
@HonestMechanicChannel6 ай бұрын
Hi Mbach, how are your spark plugs?
@mbachimwale6 ай бұрын
@@HonestMechanicChannel I haven't changed them yet
@muhammadtalhasiddiqui69143 ай бұрын
Hi all, when i switch on the car, along with a few lights on dash, the epc light comes on but when the car ignition starts, the epc light goes off. Is this normal or means a problem with epc?
@HonestMechanicChannel3 ай бұрын
Hi, that is absolutely normal most (if not all) Audi's do that.
@iglaveli72306 ай бұрын
Hey the epc comes on , on my C7 A6. It comes on sometimes when I turn the car on but not every time. Would could it be ? I do feel a slight decrease in power when it is on.
@Alberto-qf7zh5 ай бұрын
I'm having the exact same issue as you described, mine is a 2014 Audi A4. Took it to a mechanic who said it was the oxygen sensor (also called lambda sensor). Changed the one who was "supposed" to be faulty, only for the light to come ON again about 2 days later. Changed the other sensor (they're 2 lambda sensors), and again, about 2 days later the EPC light came ON again. I'm getting frustrated with this. I'm going to return to them tomorrow and see what they come up with. I'll let you know if I manage to have it sorted out and what they did to sort it out. I haven't taken to my local Audi dealership because they are ridiculously expensive. I once was quoted R32000 (South african Rand) = USD1700, for rear brake calipers, that actually cost R7000 = USD380.
@roned1nero5794 ай бұрын
@@Alberto-qf7zh Did you get it fix and figure out what it was?
@Alberto-qf7zh4 ай бұрын
@@roned1nero579 Still no luck. I guess I'll have to save up and take it to Audi themselves 😒
@ULXB2583 ай бұрын
I have this light but no shaking... (RS5 8T)
@ecullyy2 ай бұрын
Thank you
@HonestMechanicChannel2 ай бұрын
You're welcome!
@2s38enjoyer7 ай бұрын
Hello, I recently had a fuel line come off on my car (weird issue) and after reconnecting the line, the epc light is on. Could this turn on simply from air getting into the fuel line/the car failing to start a couple times?
@RICHIE_RICH893 ай бұрын
So basically you mentioned all issues that can cause any host of many issues😅
@NoelG-c7s2 ай бұрын
Cleaned my Audi s4 engine bay and epc light came on and went in to limp mode🤦🏽♂️
@HonestMechanicChannel2 ай бұрын
Hi Noel, sorry to hear that, here is what I think: it's likely that water or moisture got into sensitive electrical components, such as sensors or wiring. Check for wet or loose connections, especially around the throttle body, MAF sensor, and coil packs. Dry any wet areas. If you have an OBD scanner the best place to start is to clear the codes.
@NoelG-c7s2 ай бұрын
@@HonestMechanicChannel thanks for the help, I did notice that if I let the car idle the epc light won’t come on but if I tap the gas pedal a couple times it comes on as well as both my cooling fans stoped working