Audi TT Mk1 - Cluster Controls

Do you need to set your clock on your Audi TT Instrument cluster? Want to change the time and date? Well, that and a lot of other functions that the 2 buttons do on the instrument cluster are covered in this video.
Also covered are:
Resetting the trip
Setting the speed limit warnings (there are 2 of them)
Cancelling the speed limit warnings
Viewing the car diagnostics on the LCD
Viewing and resetting the various average statistics such as speed, MPG, time driven, etc
Turning the LCD display on or off.
There are a few others covered too but if I have missed any or you would like to know more about any of these, please do leave me a commnent!
Happy TT-ing all!

[@Al-qv5vs]

Thanks Andy. Didn't know about the speed warning 1.

[@andycharger]

No worries buddy. It’s annoying if you turn it on and can’t turn it off!

[@pigeonguardgames507]

Thanks Andy, I need to reset my clock and was wondering how to do this! So again, very useful

[@andycharger]

Thanks mate! I’m surprised it does not have a little clock battery to store it!

[@pigeonguardgames507]

@@andycharger yeah or a link through the radio/ariel to auto correct time. I have a warning setting about how long I have been driving, its set to 2 hours then it flashes up on the screen!!!.....I might try and see if i can rest this with same technique.

[@RobS32]

Nice one mate my evening watch in Mallorca tonight 👌😎. Keep them coming thanks Andy!

[@andycharger]

Fantastic! At least the channel content gets to go on holiday. Enjoy your break!

[@stevenharpervw]

Nice one Andy. When I first got my TT I accidentally turn the speed warning on , and set it to 10mpg 🙈

[@andycharger]

10mph or 10mpg? 😂

[@Al-qv5vs]

I did exactly the same.

[@JesseCampbell0]

I do this every year when bringing it out of storage while trying to set the darned clock 🤣

[@stevenharpervw]

@@JesseCampbell0 haha and I though I was the only one

[@paulp96275]

Thanks Andy new to TT so very helpful 👍👨🏻‍🏭

[@andycharger]

You are very welcome sir and welcome to the club 👍

[@jambacardi2474]

Nice one Andy, didn't realise half those options were available

[@andycharger]

I know right! Lots of options we don’t know are there! I’m glad it helped mate 👍

[@vicelse8980]

Thanks Andy. Hurry back to the States. Happy holidays Sherman

[@andycharger]

Will do Vic. I hope all is good in USA!

[@vicelse8980]

Thanksgiving right around the corner. See my grin. @@andycharger

[@andycharger]

@@vicelse8980 sure is! I get to see my Cowboys Thursday night! 👍

[@vicelse8980]

Andy, I'm changing out my fat five 17" wheels for 9 spoke versions like yours. . What thickness wheel spacers do you use with the 18 x 8 wheels ? Tire size ? Tnx. I'll have piece of mince meat pie for your on Thanksgiving. @@andycharger

[@Jluischa]

Great info, saludos desde México!

[@andycharger]

Gracias Mike!

[@laloguerra6084]

Hi Andy I own a MK2 a keep press the cluster left bottom for the self diagnostic and I see exactly what you show on the video but there ia no OK at the end. (no warning lights on)

[@andycharger]

Hi Lalo. It may be a different set of button presses for a MK2. This is for a MK1. Can I recommend you check out @carchris82 on KZbin as he is very knowledgeable about the Mk2. I hope that helps and thanks for the comment!

[@laloguerra6084]

@@andycharger thank you!

[@Archergonia]

Hi Andy. So the diagnostic warning displays on the cluster at the end after you long press the left button, are they cause for concern? Especially if there is no “OK” after the display. I ask this because my car has been running fine and I hadn’t had any warning lights pop up on my display or anything but when i long press the left button, all these warning lights appear (some red)

[@andycharger]

Hi Oyena. Sorry it took me so long to reply and thanks for your comment. I think the symbols that appear with the long press are just the cycling through the various warning diagnostics. It does not mean there is a problem. Depending on if the engie is running will also affect if some of these are red. i.e. they need the engine running to get a reading. I am not sure about the OK. Do you have a ODB2 reader you can plug in to get a better understanding of the error codes? I must cover that on my channel.

[@cillno]

i was wondering what that screen displayed mine has been out since I bought it and now I want to see about getting it fixed/ fixing it myself.

[@andycharger]

Before you do, check the button underneath the wiper stalk. Not on the end but the underneath. Press and hold it and it turns the screen on and off. It could be as simple as that. 👍

[@cillno]

@@andycharger unfortunately it's a dead pixel issue

[@cesarolive5296]

Hi Andy, is there a way to reset the tachometer and speedometer needles (big ones) without removing the cluster? thanks

[@andycharger]

Hi Cesar. I think this can only been done with the cluster off the car.

[@patrickodonnell9388]

My cluster doesn't work. well the middle part doesn't but the rest is working.

[@andycharger]

There are some great cluster repair guys in the UK. Check out my video on my experience having my cluster repaired!

[@stephenhancock2974]

Is it possible to reset the engine temperature to readout in Fahrenheit?

[@andycharger]

Good question and I think the answer is unfortunately no. However, there is a colour screen upgrade for the dash/clocks by ABT and I believe you can choose what you want the temp to show as.

[@bigfacts1914]

Irs sooooooooooo irritating to put washer fluids in ! I got the same warning light 😂

[@bigfacts1914]

I HATE those beeps. Someone needs to come up with a vid to silence ALL other than using Tech 2

[@andycharger]

Too right. They are very frustrating! Thanks for your comment!