When you did the first launch the first thing I thought was "are the dogs still in the trunk?", and indeed they were 😂
@03scgt3 жыл бұрын
It’s just the wastegate rattle. A lot of the rs cars do it once you have exhaust you just happen to notice it more.
@deadmasterz3 жыл бұрын
Same on bmws 😂
@Merlinen823 жыл бұрын
Ye same on my rs3, and it is also the exhaust flaps thats rattle, and very common problems that they brake. One of mine gives a failt code some times so it is on the way out.
@stealthhtm233 жыл бұрын
100% wastegate rattle. catless dp accentuates it immensely. hated that, on my RS3. traded it in for an RS5 lol
@hulkrs37383 жыл бұрын
This guy knows. 100% wastegate rattle, hugely common thing with these cars once you go straight through.
@austingates19613 жыл бұрын
happens on my 3.0t q50
@paulvina19743 жыл бұрын
Glad you got the centering kit. It makes a HUGE difference. The bolts are one-time use because they stretch when you torque them. If you see a torque value that's got an additional turn in degrees, it's torque to yield. Also, if you see a bolt that's a kind of green color, it's torque-to yield. Almost every bolt in the suspension is torque-to-yield as well and needs to be replaced.
@EpicViper90483 жыл бұрын
Can we see Adam's reaction to the tune? IT LOOKS INSANEEE
@maxbull2823 жыл бұрын
yeees
@stealthhtm233 жыл бұрын
when I went stage 2 on my RS3, I was shocked. it’s stupid fast, with little upgrades. around 560hp. clocked a 2.95 0-60
@Teeeerell3 жыл бұрын
Need Lz’s reaction!
@smgs9213 жыл бұрын
The exhaust rattle could be similar to my 335i where the wastegate stays closed to warm up the cat on cold starts and when tuning you can turn that off and that sound goes away. I could be off about that but it sounds similar to mine when i put catless downpipes before tuning
@jackstevenson44213 жыл бұрын
100% what it is
@alex_knight3 жыл бұрын
My RS3 has that waste gate rattle 👍🏻
@darrenobrien76673 жыл бұрын
That noise is 100% wastegate rattle.
@helplmchoking3 жыл бұрын
Yeah same here on mine. Even the super basic flash tunes usually have an option to disable it. Disabling it makes basically no difference to your car's emissions, the cat(s) will heat up anyway, manufacturers use that and loads of other tricks to pass emissions tests which are usually around 15 minutes long, so if you can get the cats working fully for an extra minute, that's a huge difference to the test result even if it doesn't help real world emissions - Subaru's H6 has insanely restrictive headers that do exactly this, it let the car pass emission testing but they're so bad the engine actually loses loads of power as it starts pinging when it's up to temp.
@bloodseedwahdirass20993 жыл бұрын
Yeah 100% what is going on my 335i is the same way
@thomase9073 жыл бұрын
A lot of DIT cars have that tick on cold start, it is due to a double injection event on the cold start to help warm the cats up. it can be tuned out on a lot of cars.
@stealthhtm233 жыл бұрын
it’s the wastegate that’s rattling on cold starts. known issue on the TTRS & RS3. louder with catless downpipe & midpipes. can be tuned out.
@gforceBRZ3 жыл бұрын
@@stealthhtm23 hope she sees this!
@dawiebotes91243 жыл бұрын
Keeps the carbon build up away. Finally
@danielnordal27253 жыл бұрын
I really like cars, because I am a car lover your cars is so very super cool. Your Audi TT RS has really nice color!
@conradfajardo88813 жыл бұрын
Nice to have a lot of people looking after your builds and helping out. Keep on enjoying ❤️❤️❤️
@corey6403 жыл бұрын
The most common torque to yield bolts you'll run into are the head bolts and balanced bolt on a LS. When you pull the old ones, you can literally see the stretch. It's significant.
@Chelsslyn5.03 жыл бұрын
Wow I’m so in love with this Audi TT RS. You brought this car to life! I now have another car to research and drool over! 🤤
@mustangman37693 жыл бұрын
Hey Collete, while I do not have a ton of experience on the TTRS platform. I can tell you this. I’ve worked on a lot of European cars and they tend to have a common feature that causes this rattling noise. It’s called a catalytic converter warm-up sequence. Some call it start up roar. I see a lot of comments about wastegate rattle which frankly I would find hard to believe on a brand new car. On many tuning platforms such as BMW this can be actively turned off so that the car does not go through this sequence. I would talk to your tuning company and ask them if there is an option for turning it off. my BMW did the same exact thing after I put an exhaust on it particularly deleting the catalytic converter.
@MrZyLeXx3 жыл бұрын
It's the wastegates in these cars, it's been a known problem for very long. Sadly there is no real fix other than a new turbo
@gedam1313 жыл бұрын
my MINI JCW F56 (2.0T BMW engine) also has a rattle like that while cold start after installing a 200cell sport cat. I mostly hear it when the engine is cold and accelerating (normal) in low RPM. Do you think it can be the wastegate in that case?
@MrZyLeXx3 жыл бұрын
@@gedam131 might be, especially if u had a super quiet exhaust before this. If it is, it shouldn't be a problem. Do u hear it through out the coldstart or only as soon as u start it?
@mustangman37693 жыл бұрын
@@MrZyLeXx dude the car probably has less than 1000 miles
@mustangman37693 жыл бұрын
@@gedam131 you are hearing the cat warm up sequence that I am referring to. Adding to your exhaust would not immediately make your wastegate go bad.
@blacksheep3433 жыл бұрын
OMFG what a monster! I want one. 034 is where its at!
@asmorey783 жыл бұрын
You will love the o34 subframe bolts. Your "exhaust leak" is the waste gate rattle with the stock turbo. It can be tuned out and sound 99% better. DS1 is usually the best way to go to get rid of that pesky rattle. Car looks awesome and runs good! But you are doing your research just as all of us have and figuring things out. Good work!
@The_Leeroy3 жыл бұрын
you and Adam are perfect for each other, you both do the "it's the new daily, i'll keep it stock" and 2 days later "i got 30 mods planned and ordered, and on the way for the car" XD
@trippspeed3 жыл бұрын
Hey Collete, that rattle sounds like the flapper valve inside the hot side of the turbo. You could be hearing that like I did on my car because the V Band clamp where the downpipe mates to turbo hot side didnt seal right when I tightened it up. Mine was rattling because the wastegate actuator arm was loose, which was letting that hot side internal flapper rattle. It was pretty loud just like on your car. Im just guessing, but the sound is identical to what I had with my car.
@kevinriordan78423 жыл бұрын
I enjoy tuning my Audi's and you selected a great tuner with 034 motorsports as they are first and foremost an engineering company and build safe, reliable tunes. Software isn't a workaround sensors to trick ECM. One recommendation... as I have sat through a couple of Loctite demonstrations.... you don't need to paint the bolt threads. Just a bit will do it, though not sure if red is a good choice in suspension as removing will likely require heat.
@ARamzze3 жыл бұрын
Wastegate rattle. Super common on these. Upgrade the turbo or some custom tunes and fix it.
@99ebpsi243 жыл бұрын
Yup super common on the rs3/ttrs 5 cylinders.
@csfcleaner32483 жыл бұрын
TTRS my dreamcar, actually only golf 7 FL with 500 hp, these ttrs are beasts with big turbo and engine done.
@Crispy13203 жыл бұрын
Dang girl that Audi TT finally moves out like it should and that's just the beginning of what that car is capable of. I can't wait for you to finish all the mods on it. Adam LZ you better look out she's coming for blood
@puntachu3 жыл бұрын
TTRS vs 992? Idk man I don’t see why not
@SushiPac3 жыл бұрын
I could never get over that green on the TTRS looks sooo good
@SarahnTuned3 жыл бұрын
Yasss!!! That 07K3 sounds soo amazing now 🥰
@thepilgrim74673 жыл бұрын
Sarah it's not an 8n! What's wrong with you?
@BobcatBart3 жыл бұрын
I agree Mr. Adams, it's an amazing piece of machinery.
@rmkiels3 жыл бұрын
My stock 2019 TTRS with 034 Cold Air Intake & Sunoco 100 octane with original Hankook tires with 20,800 miles on it ran 7.9sec & 99mph beating a C8 Corvette @ Kingman Az Street Drags on Oct23, 2021. I'd love a Stage 1 tune but my car is CPO'd till 8/25 and the warranty has value to me.
@upgradeNEVER3 жыл бұрын
They're nutty cars with RS3/TTRS. Essentially half a Lambo V10 engine under the bonnet.
@matteosti13 жыл бұрын
its 100% the wastegate rattle, it happens on warm up and light throttle (you will hear it more with a downpipe). I think that 034 tunes it out. On ttrs rs3, the wastegate is normally open and close to make boost.
@MRAbate3 жыл бұрын
12:15 priceless 🥰😘
@SteveRivett3 жыл бұрын
My friends dad had one of the original TT's that would lose control and kill people. Part of the fix on it was to remove the subframe bolts and retorque them as the subframes weren't always on straight. The other solution was to add the flipper spoiler.
@tt-rs14573 жыл бұрын
I had the 8n TT for about 14 years, remove the spoiler and nothing happpend Never heart, that subframe bolts killed people on the 8n.......sounds very superstitious to me..... Audi upgarted the 2000 model year with a stiffer suspension and added ESP. But there was no need for an upgrade on the older ones, neither the spoiler or the ESP. Only the suspension where on an recall. And even so, you can remove the little spoiler on cars which where equipped with it. Only the successor TT , the 8J and the cars based on it......like Golf 5,& / Scirocco and Beetle......had problems with lose subframe srews......TTY. But again, the didn't killed people.
@SteveRivett3 жыл бұрын
@@tt-rs1457 This particular car would get unstable at very high speeds. The dealer wasn't able to figure it out so eventually Audi sent somebody to the dealer to work on the car. The subframe was the problem on it. I seem to remember the TTs being dangerous initially.
@skyzen22713 жыл бұрын
The turbo noises 😩
@shan3_o3 жыл бұрын
Yea as a few have mentioned the rattle when starting is the electronic turbo waste gate rattle and you notice it more with a down pipe, love those little spacers on the sub frame to centre it, great idea for those working at home - there's an alignment tool for them we use at dealers
@MrDannyd93 жыл бұрын
6:30 Pull the spark plugs and put a few drops of 2-cycle oil in each cylinder. The exhaust will smoke for about 30 seconds and you can see the exhaust leaks. I accidentally discovered this while doing a wet compression check.
@colbyhall19893 жыл бұрын
034 has provided me with all the bolt on goodies for my Audi S3 8V. Fit and finish is spot on and the results are as claimed. Cheers
@pacoflyer3 жыл бұрын
Sounds great! But yeah that's wastegate rattle. DS1 can be custom tuned out. All you need now is a wavetrac LSD for the front since that is open diff and the Iroz haldex controller to manual ramp up and down the awd split on the fly.
@rutgerharmeling93983 жыл бұрын
The startup rattle sound is the cat warmup programme so no leaks 👌
@nathanlu84133 жыл бұрын
Wastegate rattle. My rs3 sounds exactly the same on cold starts. I heard ppl running ds1 software are able to tune it out with a custom tune but thats about it.
@alex_knight3 жыл бұрын
Same 👍🏻
@zamianmartin42733 жыл бұрын
Same
@devinweatherby45273 жыл бұрын
yup
@TheDustdreams3 жыл бұрын
034 now lists removing wastegate rattle as one of the features on their tune.
@jayrains95383 жыл бұрын
Colllete you need a Uniden mirror mount and to code out that start up roll call stuff. Make it nice and simple
@Jerseymulisha213 жыл бұрын
Building my 03 gti 20th anniversary jazz blue on air and Ferrari wheels..bucket list car..but tunning a euro car was alot of fun thats for sure especially after went big turbo and what not....
@tonyranquin11343 жыл бұрын
Awesome car! I love the green color and sound of the straight-five engine. Enjoy it at last you can. Here in Belgium whe have to deal with sound regulations, OPF emission. It realy sucks!!
@ravensulaiman53223 жыл бұрын
Cold start on the rs3 has wastegate rattle heating up the cats. Its normal
@Jackaquatics3 жыл бұрын
I'm so glad that you're putting out more content always look forward to your videos no matter what they are they always brighten my day thank you very much and keep up the good work
@Pascallozz3 жыл бұрын
I am happy to see that Collets fan’s are all mature in the comments.
@subes58733 жыл бұрын
The ticking is programmed in, my E92 M3 does the same.. it's a preheat the cat with extra fuel...
@goldenhunter8013 жыл бұрын
The Audi TTRS finally getting dialed in and more power couldn't ask for a better video. The daily keeps getting better and better 👍💚
@DownLow00993 жыл бұрын
"I forgot we had the dogs in the back"... I died 🤣🤣🤣
@lincolnshirepoacher8943 жыл бұрын
Yes, that was bloody funny.
@nicolashoyt53413 жыл бұрын
Easy way to find the exhaust leaks (if there are any) is to grab a couple handfuls of rags and stuff them in the exhaust tips while it's running. Someone will have to hold them in there and they will heat up rather quickly but it forces any leaks to show up easily.
@ws26643 жыл бұрын
one time use bolts have been out for quite a while, usually crank, cam and head bolts. Chances are you probably have them on some or all those cars you have so if you plan on doing engine work in the future on any of them double check before you take any thing apart.
@robloc21653 жыл бұрын
I love how excited you get over your cars lol especially when u say "i need a moment" 🤣🤣 love the content Collete!! Keep it coming!!
@chriswarner86963 жыл бұрын
That is definitely a proper sports car and it’s really quick🔥
@DriftingZaabee3 жыл бұрын
Sheesh great video like always
@carldavis3913 жыл бұрын
Btw Collette's necklace along with ear rings brings out her eyes.. ✨ 😊✨🏁 Go Ms Davis 🚦 🏁
@cameronanderson62173 жыл бұрын
034 is the best! s4 owner here, wish i had a ttrs! 😂
@JoeL-dp1ej2 жыл бұрын
Is there an aftermarket blow of valve on the car? I love the sound of turbo flutter but not the psshh venting. Your car sounds perfect 👍
@bryan_turner3 жыл бұрын
That noise on start up is probably the secondary air injection which runs for the first 20 seconds or so. It will make the car louder at first and it's to aid the car in warming up the emissions system.
@deklyndharrison66913 жыл бұрын
i have 1 time use stretch bolts on my B5 S4 the only ones that i have delt with are what hold the cv axel and wheel bearing together
@brainards113 жыл бұрын
Love to see a girl really dig her car...its beautiful!!!
@greasyginzo3 жыл бұрын
Do you have the anti rattle clip on the wastegate actuator? Also I hope you installed the top collars on those bolts.
@EVILGT3 жыл бұрын
Love the colour! ... that's what we getting in the new RS3 🏌️♀️
@notmychairnotmyprblm3 жыл бұрын
Sounds so so good, those awd launches are heckin gnarly 🚗 💨
@djd11623 жыл бұрын
Damn I’ve scrolled the comments and I think I’m the only person afraid of all of that red Loctite 😂 Awesome stuff Collete!
@gerardstefanelli16183 жыл бұрын
I was thinking the same thing. What is wrong with blue loctite?
@evanmounsey65843 жыл бұрын
Hah I just did the same thing. Red Loctite is for permanent thread locking which could make those bolts could be a real pain to get out. Should be using the blue which is removable.
@tbusch633 жыл бұрын
@@gerardstefanelli1618 The red holds much better than blue and also since she may never remove those bolts again the red is an excellent choice. if she wants to remove them she just needs to heat the bolts to 550°-560° which will allow removal without breaking the bolts.
@gerardstefanelli16183 жыл бұрын
@@tbusch63 I get that is hold better then using the blue Loctite but a lot of heat to using on bolts that go into the body. Plus that subframe needs to come out while doing most things like clutch packs or engine work. Any time that I’ve taken VW subframe bolts out I just l re-torqued new bolts and never had a problem. Hopefully she doesn’t have a problem with removing them in the future.
@TechX13203 жыл бұрын
The launches on my 2012 stage 2+ golf r are amazingly fun when I can grip up lol
@joepdiepstraten56253 жыл бұрын
Loved your face when you launched the first time with the dogs still in the back (oopsie) subbed
@TwistaCSS3 жыл бұрын
It's the cold start for the DAZA - the RS3 has the same thing (exact same engine). It's even more prominent when running a catless DP such as myself. Goes away after 10 seconds or so and then all good to go.
@nathanpiper13463 жыл бұрын
bmw n54 335i has waste gate rattle, sounds like that tbh, surprised adam doesnt recognize that noise. Sounds fricking awesome!
@juelbaird3 жыл бұрын
Check everything with the secondary air injection system. That is what u hear on startup
@chrismechanic20003 жыл бұрын
water misting onto the intercooler will add power as well, lowers the density of the inlet charge = more power.
@sharkonet36362 жыл бұрын
I really love to see girls enjoying cars and mechanic 😍 This video was insane 🔥 You just got one more subscriber 😁
@colinchandler65163 жыл бұрын
going to the shop after the holiday so im feeling your video
@2of2DCH3 жыл бұрын
Upper dogbone insert sent with the bottom? It's a must, or the lower one bends. Deadset/rigid collar kits are nice tho I think they are trickier with the aluminum subframe due to the washer on the top. Definitely need the rear subframe inserts for that car.
@christopherpulling97713 жыл бұрын
Here I am 11pm peeling a sunburn watching this! Life really could be worse lol
@antoinep65039 ай бұрын
Hello nice video! Is this a stage 2 93 tune or a stage 2 e85 tune?
@Daveyboy_RS33 жыл бұрын
Absolutely stunning!!! The cars lookin fresh too...
@Gtrjerry733 жыл бұрын
sounds amazing ! love the ttrs. prolly my next car. also just a tip - if you put the camera directly behind center of the car it makes for a more dramatic take off video :)
@steveswain46463 жыл бұрын
Don't forget to get another wheel alignment after fitting the new stretch bots. Love the channel
@MaxFluff3 жыл бұрын
Have a great weekend everyone!! Especially the notification squad
@alancalvitti Жыл бұрын
holy reese witherspoon, this is the best channel yet
@Takataz3 жыл бұрын
You should try driving it for a few minutes then shutting it off and starting right back up again. If its an engine warmup situation it should not return on second startup otherwise it may be the manifold.
@VuBeClan3 жыл бұрын
nooooo.. It's the Wastegate, can be tuned out
@seli57803 жыл бұрын
Love the vids! But is nobody gunna talk about the jedi in the time lapse 🤣🤣
@bradleyhouston97713 жыл бұрын
Yes ttrs stage 2 e85 vs Adams 992 stage 1! I would love to see this.
@adasmithy3 жыл бұрын
It’s the cold start warm up for the factory cat. It advances timing and etc.
@gillistenbroeke35563 жыл бұрын
welcome to the wonderful world of Audi!
@Inzy3 жыл бұрын
That exhaust noise is just the valve vibrating it’s common on all TTRS/RS3. I have it on mine
@Sameer_s5513 жыл бұрын
good job for your youtube video very good
@emersonviana65393 жыл бұрын
oh man the dogs in the back! 😂 glad they are ok!
@cradilyz3 жыл бұрын
probs were like "uh oh not this shit again"
@handanarts3 жыл бұрын
Awesome video, love seeing different cars in a whole video
@Falkietje3 жыл бұрын
If you have to tighten a bolt to a specified torque and then turn it another specified degrees it is an one time use bolt. They stretch and therefore cannot be torqued so you have to rotate them a specific amount.
@FixLife1193 жыл бұрын
Damn! Thing is wicked! Any idea what the 0-60 time is?
@gellideggti3 жыл бұрын
You always have better tunes in the background over Adam:)
@DownLow00993 жыл бұрын
One time use bolts huh. Interesting. What are they torqued to?
@Creepsss3 жыл бұрын
13:51 STUUTUUTUTUTU
@carldavis3913 жыл бұрын
Great stiching pattern on your seats 💙
@Demkneez3 жыл бұрын
You need to do a Cold Start delete in order to remove that sound on start up
@cordite72073 жыл бұрын
In theory any bolt that is torqued to specification is one use, its only really followed by OEM's and technicians
@tt-rs14573 жыл бұрын
You can easy locate these bolts, which only have to use once. When the torque Spec added an addintional angle ( 90°).....then it is a TTY ( Torque to yield ) Srew and you have to replace it.
@wobblysauce3 жыл бұрын
Bingo. But, most people reuse them, it is only when you go past that yield point to the plasticity that makes them unusable.
@ChronicSPD13 жыл бұрын
The noise could be secondary air injection on cold starts. It happens on most MQB platform cars.
@secretsquirrel7263 жыл бұрын
This was a good build series so far.
@wademann92143 жыл бұрын
13:00 I would have had the same reaction! So rad!!! 😂🔥🔥🔥
@bubonix24063 жыл бұрын
Should see my mates APR stage 3 TTRS, spins all 4s on semi slicks, gnarly. Stage 2 is an animal too The "rattle" also sounds similar to my mates car on cold start, goes away once warm
@tt-rs14573 жыл бұрын
The Inlinefive are notorious for making anoying rattle sounds...."Vorsprung durch Technik", we call it here in germany. That was the reason, thereby I ordered a Hemi and keep my VR5 for wintertime.
@sidermotorsports3 жыл бұрын
@@tt-rs1457 so you went from one tick to hemi tick, lol.
@tt-rs14573 жыл бұрын
@@sidermotorsports Love to see you smile :-)
@luisnejez12323 жыл бұрын
Love that car I hope all goes well for me and I can get me a TT rs MK2 next year
@clevortrevor51213 жыл бұрын
My 07k has a similar sound on start up but it goes away, I think it’s just what they sound like on a cold start.
@NotJo4Ever133 жыл бұрын
LOL Chris with the stop motion bolt holding
@Tuonon3n3 жыл бұрын
Outter drive axle part also mounts with one use only bolts And some head studs/bolts?