Audi V6 3.0T / 3.2L Intake Installation Guide by USP Motorsports

[@vin605]

Engine/bay super clean

[@braedylvell6164]

i really want one but i cant find any that fit my 2008 audi a6 3.2L i was wondering if this would work

[@jhourney2greatness738]

Hi! This might be off topic, but where is the mass air flow sensor of this car?

[@nomecaca]

this is the perfect war to lose power and sound cool, I had a very similar intake on my B8.5 S4 and I could feel the power loss I took it off after a week, this one is designed even cheapper it doesn't even have the rubber mouldings to completely block the engine heat lol. If you want a good intake go with APR if you want something that works and is cheap change the stock intake hose to a straight one and replace the stock filter with K&N DONE.

[@Patrick_Felipe]

Does it need Tuning? How come the kit is not available in the website? Only thing that is available after selecting the year and model is only the filter Also, i live in cali so, is it CARB approve?

[@Aftp12]

That Supercharger Whine

[@BigbrookLORDOFTHE7SEAS]

Man awesome vid dude it helped me realize that i missed 2 important steps for rushing when i did mine. I forgot to plug in that small breathing tube into the intake aswell as to add the smaller filter to the air hose🤙🏼 thumbs up for that.

[@purdu3]

will this kit work on my 2006 audi a4 3.2 ?

[@franklingranton9054]

I need the same reply

[@abeibrahim5846]

Hi, Great video - One question: Where did you place the Air Mass Sensor or the 3.0L TFSI engine does not have one?

[@stevenGX460]

My '13 3.0t doesn't have a maf sensor 🤷‍♂️

[@abeibrahim5846]

@@stevenGX460 Yes, I did confirm it with the dealer; they said, the O2 sensor does the job for the Air Mass sensor.

[@BillyGeorgeWilliams]

Does the heated shield come with the kit? Or where do I get the heated shield. Your great at explaining the installation step by step, thanks.

[@hailieashleysshowentertain2539]

So that last breather hose don't plug to nothing

[@christiaanhattingh3772]

Is it going to make a difference on the fual consumption?

[@vanvoliravioli6872]

If you're doing mods to your car you really shouldn't give a shit about fuel consumption

[@jonathanochoa3248]

Will this air intake fit a 2009 A5 quattro coupe??

[@LeanPowerlifter]

Is this roc euro intake?

[@keanu7126]

Can I install it to my Audi A4 b7 3.2 fsi? And what will be new with my car?

[@swift__]

Will this fit a 2014 Audi Q7? ( it’s also a 3.0T )

[@dagnut]

Thanks for the video, does this fit the a6 c6 3.0 t?

[@jessesanchezjr9275]

I’m guessing yea. I have an A6 C6 3.2L. Not the t tho and I think it’ll work for me too

[@jessesanchezjr9275]

Nvm. It won’t work for me, but it will work for you

[@jetknight7562]

Sounds like is a turbo ; added this will it not effect you having your car smog..?

[@PanchoOrejuela]

The engine has turbo

[@lifeistooshortletitgo9574]

zip Ties? truly professional.

[@blu101-o3t]

Where can I find this kit ??!!!?!!????

[@vincentcammisano4275]

I can’t seem to find the breather hose on my a5 3.2. Please help

[@michaeltatham4307]

I have the same application, and I'm looking into a braided fuel line.

[@SJCamperTV]

Wow Good sound

[@phobiazzzero4935]

same process for A7?

[@NutUpOr]

Is a tune required? I have a 2011 Audi S4. When I put a new CAI on my '13 mustang and it required a tune.

[@DuBstep115]

No tune needed because there is no improvement vs stock...

[@Ckazz-mr1wq]

Just gives a better flow to the engine and keeps it cool then the factory

[@cristiandbacksfan9435]

What’s the size of that little filter ??

[@stasjunos8016]

Отличная тема.

[@xamicolo]

Where the MAF is located? Don’t have?

[@ИванГалкин-я5т]

One after throttle and 2 inside the supercharger

[@jaketorrens3778]

Great video, easy instructions, cheers

[@felixdh198]

Hey guys, do you got some experience with this kit inside 2008 Audi A4 B8 3.2 FSI. In my opinion the intake looks similar to that one from 3.0 TFSI. Thanks for your information

[@mx4822]

Have u tried i?

[@felixdh198]

@@mx4822 hello, we don't test it.

[@Dezzylyricz]

The stock setup with a few mods still would do better. It was made the way it was for purposes.

[@Dezzylyricz]

Daniel Gonsalves wheels, suspension, exaust, breaks.

[@apemaverick07]

Not if you are tuned...

[@lou4nysq510]

On a supercharger, free air flow is the best! Stock air box redirect air to engine bay. I drilled 5 holes each side. a inch around.,also installed AWE air filter.sounds really good!

[@georgethoma9027]

C'est hyper étouffé les gars ;)

[@maseface1]

thinking about doing it to my a4 b8 3.2l but Im not sure how i feel about that high pitch sound when u rev...is that normal?

[@xxEJSubaru20xx]

maseface1 his is the 3.0 TurboFSI so no we wont get that whine sound with the 3.2

[@Rexy-lf6gc]

so now you're taking hot air from the engine, good work!

[@MikeClear21]

Thats what the shield is for man

[@bekagogua]

guys Can I install 3.0TFSI kompressor on 3.2 FSI engine ?

[@illyrian4life]

no

[@Vetkiller]

That's a super charger for 3.2L?

[@illyrian4life]

no. this motor is the 3.0 supercharged motor. 3.2 is a totally different engine from this one.

[@blu101-o3t]

Sweet !!!!

[@alexross4062]

I just got mine, and it doesn't seem to fit. The air filter doesn't fit onto the end of the pipe. Anyone else experience with a C6 A6? (2009)

[@jj-tq4hx]

I have the exact year as your A6 and filter and tube fit just fine. Only issue ( and it's a big one considering the high price) is the heat shield does not fit nor do the holes in the heat shield align with the bottom where your supposed to secure It. I have a feeling the heat shield sent is for maybe the Q5 or other model but definitely not my A6C6!!!

[@carlosperes6650]

HOLA. ALGUIEN SABE SI EXISTE UN SUPER CARGADOR PARA UN A5 SLINE 3.2 ? O ALGUNA ALTERNATIVA PARA POTENCIARLO ?

[@javimv6373]

Si lo sabes dímelo pls❤️

[@Mr.alpharo]

Necesito el orden de los cables del mar por favor gracias

[@Mr.alpharo]

Corrijo orden de los cables del maf Audi Q5 2011 gracias

[@mmalecka41]

Sure is a good looking car.:)

[@Eric-zs6rd]

It doesn't pull off. I just want to remove the airbox to get better access for the serpentine belt. I'm about to just cut it off with a sawzall

[@jj-tq4hx]

Got mine shipped to Europe and ordered the air intake specifically for my 2009 A6 3.0T and the heat shield does not fit no matter how much you fiddle with it. That is something USP should solve because they are not exactly cheap. 400 plus dollars and they send me a part that does not fit????😡

[@lou4nysq510]

My dude, I feel you! Ordered a tune from ECS tuning, 2weeks now still waiting! 😡

[@lou4nysq510]

Got that AWE air filter RKX intake hose. I cut up the air box. Don't sound like that..

[@bmwpowercn]

Wow tech video thump up

[@jakezgab8576]

Drilling into the body always voids your rust protection warranty. Self tapping is the same as drilling into the body breaking the rust protection coating.

[@kern417]

"a 7 millimeter...socket?" dagnabbit who put a question mark on the teleprompter.

[@jeffleyedouard5663]

Can you do it on a6

[@LifeofSailorMike]

+Jeffley Edouard Me too!! No one makes one for the 3.2L Audi A6! We want one!!! lol

[@Jacoq]

@@LifeofSailorMike me as well! it should be the same because i think the engine's the same but I just dont know...

[@nnface2023]

You got 3 more washes left in that hair brother.

[@TravisBrown42]

+MiragEdoz so mean, LOL

[@zhooted5508]

A Zip-tie? Really!? What is this Japan!?

[@sebastianmiticky2491]

Errl Sweatshirt any problem with jdm ?

[@malloycade8626]

Face palm

[@robsonf6683]

There is no gain from intake upgrades. It's a waste of money.

[@C8corvetteobsession901]

There is minimal not really noticeable gain. There are videos of Dyno that show before and after. Most people including myself, just want to hear the supercharger not really expecting to gain 20hp 🤷🏽‍♂️

[@malloycade8626]

Once tuned there is....lol

[@lifeistooshortletitgo9574]

Such a bad mod. Has anyone documented power loss?

[@Ckazz-mr1wq]

aftermarket intake is better than the factory tho what you on 😂😂😂

[@tyrekcheeseman2176]

I'm amazed that company charge so much for labor just to do simple shit like this what a fucking rip off that's why you better off learning yourself.

[@dictatte358]

Great! you lost 5 Hp and your engine look like a nice Toyota or Suzuki. Use Oem sport filters guys, thats more cheap, and more efficient.

[@davidmehr1939]

asshole

[@dictatte358]

@@davidmehr1939 lol lol xd lol lol

[@abeibrahim5846]

Hi, Great video - One question: Where did you place the Air Mass Sensor or the 3.0L TFSI engine does not have one?

[@jessesanchezjr9275]

It does not have one

[@axelwhite4shfnnd858]

@@jessesanchezjr9275 it doesn’t?

[@jessesanchezjr9275]

@@axelwhite4shfnnd858 i believe so. I saw someone else write that. So I thought I should let this man know

[@axelwhite4shfnnd858]

@@jessesanchezjr9275 thank you very much

[@thaddeuspierce1889]

Will this work on a,2006 Audi A6 3.2?

[@gabrielpita4104]

I have the same car 😫 but there is nothing for the A4 3.2 2006. Does this intake works?

[@thaddeuspierce1889]

Gabriel Pita idk never tried it. Got rid of the 3.2 .. got a 4.2 now

[@jerryrenteria5052]

Does this fit an Audi A7 2013??? 3.0TFSI

[@bigsammy5132]

does this fit on the 2014 Audi Q7?

[@AintdatIntrovert]

If I have a n/a v6 3.2 can I put the supercharger on it ? Like the 3.0

[@sylvianpost7962]

Does this fit a A6 C6 3.2 FSI?

[@electo2006]

No! This is for the 3.0tsfi engine. The 3.2 does not have aftermarket intakeS unless you can build it yourself.

[@jessesanchezjr9275]

@@electo2006 I have an A6 C6 3.2L. Do you think you could help with making one? Like telling me the pieces to get. I don’t know much about the air stuff

[@flo6489]

Will this work on a 2010 C6 3.0T ad well??

[@keanu7126]

Does this fit for a4 b7 3.2 fsi?