Audient iD14 MKII Audio Interface - EVERYTHING YOU WANT TO KNOW

[@jamman6]

Dude, this is a most excellent explanation of the device. I salute you!

[@petechevy6455]

Answered every question I had. Thanks for this. A must watch if you own this unit.

[@patxigonzalez4206]

Even i got it clear that i know nothing, the explanation is that crystal clear. Congrats! And thank you!

[@adamlopez9286]

Probably the most useful and well-produced tutorial on KZbin. Fantastic!

[@jamesconradtucker]

Excellent review Brother! You cover the whole gambit of usage. I just received my iD14 mkII and can't say enough about it. I think my guitars alone went up 3 notches in pickup character alone from the really clean JFET impedance and circuitry. Better than a cloud lifter and the mic pre's shine with clarity. Add to that the stellar output and S/N. Your video is like a users manual. Refreshing, when all too many other YT reviews are just a hodgepodge of echoing vague first impressions. Your review shows you are covering the important and useful possibilities. Gave you a thumbs up. Thank You!

[@BenoniStudio]

Yes, I'm not personally a fan of videos where folks simply give you an opinion (hype) and don't even show the function of a plugin or interface. I always try to focus on function, not hype.

[@arupsircar4855]

An excellent detailed explanation rare on youtube..I have shared it with couple of my friends as I'm too a proud owner of id 14 mk 2...Thnx Sir..

[@BenZeebar]

Fabulous video. Clear instructions, easy to follow, important details all covered. You have a real talent for explanation.

[@ChannelForty2]

Great video! I'm just getting into home recording and have been really studying up what interface I want. I've narrowed it down and decided the id14 is perfect for me. This video was fantastic and information, very much appreciated brother!

[@nigelcheah]

This is THE video I’ve been searching for ever since I started using my Audient unit. Comprehensive and easy to follow. Thank you so much!

[@freezeframeplease]

you're amazing! bought a id14 after my long lasting interface died and was so confused since it's my first time using audient. you saved me ! subscribed !

[@TansavelAcademy]

Excellent explanation screen recording loop back is very usefull.🎉

[@Ainulyaqinefendi]

Straight to the point. The best product review i've ever seen 👍

[@IamtheActionman]

This is the best tutorial video I've ever watched. Incredibly detailed and easy to follow.

[@justelvin]

I've had mine for a couple of weeks and this was tremendously helpful. I really hope Audient is hooking you up.

[@UnderstandingUKPrivateTrusts]

Brother, you are a phenomenal teacher. I have watched a ton of your videos and you have 'saved me' many times. Thank you!

[@lalitalalitah]

First time owning any audio interface. No guide. Found your video and it solved everything. May have to test every option one by one while watching to make it sure that i know and implement everything correctly when needed. But, since your guide is there i can refer to it any time if in doubt. Thanks again.

[@FenYT]

just bought mine, the upload timing of this couldnt be more perfect, thank you so much man!

[@BenoniStudio]

Enjoy 👍

[@jonasverlo]

This was a very clean and easy-to-follow video! Thank you 🙌🏻 Waiting for my unit for my home studio, and to use for drum tracking together with the 18i20!

[@erickdromoh]

do u use macOs or Windows? i cant with a windows :"/

[@HoshPak]

Damn, that's a wonderful video and a great showcase for the device! I'm sold! This looks like a smooth integration of everything I need.

[@monty671]

This was a great video. I have found myself returning to the video several time just to make sure I understood each step. Thanks

[@franciscofuchs490]

By far, the best video about the id 14. The OBS setup was terrific!! Thank you!

[@jaysenlewis3451]

Excellent video! Thanks for going over the Loopback w/ OBS setup. Love this interface. Really appreciate it!

[@SoccerQuiz-lv7gm]

Amazing video. Cleared many doubts about the interface. Thank you very much.

[@eugeneerdozain7483]

Super helpful for someone like me who has purchased this recently. I am sure I will continue to use this as a reference. Thanks!

[@michaelsotomayor5001]

I'm new to all of this. That is all lol. Very complicated yet you make it understandable. Thank you for this video.

[@ExitOnTheInside]

Useful , recieved this sweome little tank yesterday - efforts dont go unoticed - video editing is long winded , so thanks

[@unabonger777]

Excellent guide! The question I needed answered was if I could view the input levels in the mixer while setting gain, because the iD series does not display input levels on the hardware meters.

[@seandonnelly6153]

Fantastic video. Have just placed my order for the ID 14. Thank you and congrats on a job well done

[@Lifesofmiracles]

Thank you for this video mann! I like how he puts in a little humour here and there "having pizza for lunch" and the cutie dog not a guitar - I mean I enjoyed watching the whole video while learning something new! Thanks mann!

[@k-hz2742]

just got mine thank so much, love this vid

[@jardeshna]

Very detailed video, awesome! I was looking for latency measurements when monitoring an electric guitar + DAW effects and that's exactly what I found.

[@angiesuricata]

This is the best review i´ve seen, thanks

[@spacecy]

Thank you for the detailed review. I ended up buying this audio interface. Extremely satisfied! However, i am having a small issue and haven't found a solution so far. I am using OBS to stream and i set the input device for my mic at the "Analogue 1/2 (2-Audient iD14)". This is the exact description in OBS. I am getting signal, the sound is good, but something limits the volume coming into OBS at max -6dB . I can't get beyond that. I've looked into the filters of the Mic and there is nothing there, no limiter. I've tried a usb mic to see if the issue is OBS or my audio interface, and with the USB i can get it clipped. On the iD14 , i have connected my mic via XLR on input Mic/Line 1. No matter if i have the volume knob turned at 75% or 100% on the iD14, it will still limit the output going into OBS. Does anyone knows what's causing the issue? Thanks fam.

[@RyansCustomShopandGearOutlet]

Thanks! You just helped me solve a problem with my setup. Liked, shared, and subscribed!

[@ThePilate30]

This is a great video, I've had my ID44 for a while now and love it. But was always use to physical monitor/DAW controls on previous interfaces so this helps understanding the function in the software realm

[@Davidjzmusic]

This video is the best !! thank you !!! I learned so many things !!

[@brucej99820]

I am very pleased and excited when I have finally received mine today. I don't care much of their software because I'm using surface pro-8. Studio one seems the way to go. Anyways, Great video man. Going to watch this again to learn all these type of features

[@toddstantalizingtips6079]

As a complete Newbie to Audio interfaces I have been watching several videos on how to set them up and learn the process in which use them correctly...It has been Mind Melting!! Until now... your video Is AWESOME! Do you have any ohter videos for the first timers to learn the very basics of daws and/or doing voice overs? Thanks So Much For Your Work On this Video

[@BenoniStudio]

I have some other Audio Interface videos that would be suitable for beginners to pros kzbin.info/aero/PLEul48o1WdHszndjc0uadttXszwH2S6ec I don't think I have anything specifically for DAW basics or Voice Overs, but those issues are covered in several microphone and plugin review videos.

[@jellyjacobbazooka7867]

Very good tutorial, you have a “hand” for this

[@ferrarig1763]

Very perfect review and explanation

[@hernanocampo9155]

Thank you so much! the best video of this interface on internet. Ive got mine. genial video!

[@WalkWithDawn]

Very useful video, I learned a lot, thank you for sharing!

[@teashea1]

Very good video --- excellent content and production values

[@gbengaakinnola677]

A very detailed review. Thanks!!!!

[@tellybeatzofficial]

You sold me on this interface

[@musicwitharijit]

cant see the loopback in obs on mac... dont know what is the problem

[@tommyboyle23]

Brilliant thank you dude. I'm old and clueless so your video is priceless, cheers dude 🙏✌🏼

[@skeletonsecrets]

This is great! Thank you, it really helped.

[@HarvinderSingh-yy8th]

Good informative video. I will definitely purchase one.

[@ChakrabortyRaja]

I have bought id14 yesterday, It's good but my new id14 release so much heat, before I use focusrite 2i2 it was not release that much heat. Please guide me sir.

[@TheJPPANDEY]

Quite useful,,detailed tutorial thanks man. 🥰

[@gohnmorkos4040]

you are very great man thanks alot for your hard work

[@Samoan_D]

Fabulous video Best YET! TY

[@DrMobiusOfficial]

Ahhh thank you! I swapped my settings and it changed my sample rate on the loopback under the control panel. I've spent the last half hour trying to figure out why loopback stopped working! Aaaahhhh

[@PaoloC.]

I'm watching your video for the first time and I feel like I'm in the US army already 😅

[@HeavyHardHitter]

Watched your explanation. Thank you, got one for me! Please do one for the sono.

[@drrodopszin]

My only problem so far this interface, that I am never sure about the phantom power is on or not. I wish there would be a LED or something. Left-right doesn't really map into anything in my brain. I'm trying to remember it as "if it points to 48V it means it adds that".

[@EARMAKE]

Why dont any blogger tell that this card is getting reset volume after each pc restart . You must manually turn back your comfortable volume gain by volume knob each time. It doesnt have any memory. Its annoying. As i use only headphones - its very uncomfortable that this card doesnt have a separate HP volume knob.

[@farukyildizbas]

you are a great teacher

[@ShohagHossain]

Nice explanation, Love from Bangladesh ............ 💗💗💗

[@bentoncox]

Awesome vid!

[@WillyKellyMusic]

Excellent video!

[@remaksiva]

Super!!! Thank you very much!

[@gaelmares92]

AMAZING VIDEOOO TYSM

[@sweff]

First of all, holy shit that was so beautifully in depth and you answered so many questions I've had about loopback that I've been scowering for, awhile now. But of course it has raised another question for me. Once in awhile I perform at open mics on a lil "social game" called VRchat and the loopback function is going to solve many problems I've had. However I'm realizing that since I'm going to be likely sending my 1-2 to OBS or possibly straight to VRC (I may be wrong about that second option), the live audience in VRchat will likely hear themselves as well no? I think there's probably an easy answer to this that I'll figure out once I get my hands on it (likely by using a Cue mix and sending that to VRC instead?). Lemme know if I'm close or very wrong. Thx for reading my long assed question.

[@ricardogomez8078]

🤔 por que en el daw la señal del master no clipea y en el ID la señal de Daw 1+2 está pasando el 0? 🤔🤔🤔min 10:35

[@rosewurkz]

Thanks super helpful ☺️

[@wildanruruh]

Whenever Audient ID14 MK2 is powered off between PC boots, it should initialize at 0% volume. Sometimes, however, it will initialize at 100% volume instead and stay at that level until the user moves the scroll control wheel (then it immediately jumps to 0% where it should be). ID mixer shows the card being at 0% volume, while you can clearly hear it being dangerously loud (as a precaution, I had to permanently lower my monitors' volume to survive these situations, as it's a serious health hazard otherwise). please help me if you also got this issue!

[@BenoniStudio]

I have not seen this with my iD14

[@adilsonobelard9690]

thanks very good video

[@7AKV7]

I have a problem and i need your help please! My setup is FL studio + ID14 + AKG condenser mic. ALL drivers up to date (DAW driver is set to Audient one). I can record everything fine in my DAW. I use only my ID14 as my source of sound so Windows output is at Analog 1/2 so i can hear both youtube and my daw for example. I can record windows into DAW like shown here 21:18 through loopback BUT I CAN NOT do the opposite as shown in here 22:28. Ive done everything like you did. set all things that i see to 48kHz AND set loop back to master mix. OBS is capturing windows audio just fine but loop back is silent. My daw output is 1/2 so i hear it in the Main Mix. I can loop the audio from DAW to DAW thats for sure because the sound doubles and goes feedback mode. I just dont know what to do now. For some reason its just dont work. In any other setup or tutorial everything works perfect but not for me even though i do EVERYTHING EXACTLY LIKE ON THE VIDEO. Thank you for your attention.

[@Butzemann123]

Nice. How is the latency when you monitor the digital inputs?

[@xyzct]

Thank you, sir.

[@espenfarstad1697]

I am having issues. The input signal is so low with my guitars into inferface input. Barely flashes the - 36

[@Kay_Hangman]

Thank you so much

[@LaurentValette1234]

I got the same but the MK1 (USB ), it is the best deal money/quality !

[@IMrPrince93]

I wonder if the id button on the regular iD4 also allows to switch between headphones and speakers? Anyway great video !

[@pastuh]

04:20 very sad not available to control different audio jack sound.. Would be nice to have 2 different headphones..

[@Jpetersson]

Good job!

[@connectedmusic444]

How to make it zero latency with abelton?

[@MsDream1979]

1:27: so if i have no usb c port on my computer (usbc > usb a) i have less volume than a usb c to usb c connection? Possible solution?

[@BenoniStudio]

This is because USB C provides more power than USB A. The difference is not huge, but there is no way around it.

[@MsDream1979]

@@BenoniStudio Luckily i found a usbc port, but this s very informative about usb ports diffent specs!

[@PeachtreeGuitar]

Could you also include system sounds, like KZbin playback in the OBS scene through the Audient software?

[@Beatsnmotivation]

that crazy I have the same one but on Mac. and it doesn't show my sample rate!? also why can't I figure out how to turn off the direct monitoring ? trying to do the sound id Sonarworks and I can't since I can hear my microphone through the speakers. frustrating. great video sorry just wanted to speak on this

[@skjortan]

Is there a way to get rid of the blinking light when only listening to headphones?

[@leestanley5837]

Great Video. I use Logic pro, When recording, can you send as an example, logic reverb to the vocals for monitoring, when using the ID mix soft wear

[@tlepiano]

Hey man thank you for the thorough video : ) , can I ask for your opinion? I have a microphone and a stage piano which is stereo. In this case, the Audient has only 2 inputs. Is there any way I could import stereo sound with only 1 input instead of mono?

[@OmgItsAlexOfficial]

U just sold me on t his lad thnx for the info

[@GajpalsinghGond]

Nice video. I bought this one,but i'm getting a problem,when i'am running audio in my daw everything is perfect about output,but when i am playing any youtube video or say using window's output driver i'am getting bass less signal in output , like high pass. When i'am using the daw returns channel 1/2,3/4,5/6 channel i'am getting bass less output. Pls let me know if you have come accross this problem and let me know if you can help. Thankyou:)

[@BenoniStudio]

That does sound odd. No, I have not seen or heard this behavior. Perhaps try updating the driver.

[@GajpalsinghGond]

@@BenoniStudio yah man, hoping for the best, thanks for your response man🍻

[@johnthebass9153]

Great audio card. I bought it today and It get electric on USB cable. Means even your computer HD doesn't calculate for something you can hear the deep noise from speakers when you volume up maximum. But if you work on music studio like very quite one, you can hear the deep noise easily from Mark2. So I have mark1 also, I compared both and mark1 has not any deep noise if I use with adapter. If I m not using adapter, it makes same noise like mark2. Question is what will happen when you bounce your music or arrangement from your software, so will it bounce deep noise on music? I don't think so, I mean it shouldn't be.

[@tonsingmuan]

There is one c type usb cable, how to used phantom power, is usb power is sufficient to activate phantom power, there is led circle the big knob for what purpose

[@konafama]

Do routing settings stick when you power cycle the unit?

[@hellyeah_tv]

Huge thanks! You helped a lot with understanding. But I didn't get one thing - now I have only one pair of monitors and can I hear any system sounds (browser for ex.) while using OBS? Cos' when I'm turning on system to 3-4, and using 1-2 for loop back I see the levels jumping but I don't hear enything - signal going on "second pair" of monitors? But if I didn't have them I can't hear sound, right? And doesn't care what position I choose in "View ---- Show System Panel", right?

[@carlosvidal7657]

EXELENTE GRACIAS

[@dwmusic1179]

Great Video thank you! Is it possible to use a EQ in the ID Mixer App on the output? To equalize your speakers. And can the interface be used with an iPad/Iphone or only a computer? Thank you!

[@BenoniStudio]

Nope, the mixer does not accept plugins. The iD14 is not certified for iPadOS or iOS. Some people have gotten it to work, but its not made for that. If you want an interface for iOS, look to the Evo 4

[@themusketeer9458]

great video, almost everything i wondered about was answered! the one thing you didn't say tho, What buffer size does one use for windows stuff like watching youtube, gaming etc? does high buffer affect latency from windows audio or is buffer size simply for recording?

[@jaketeeling5679]

Buffer size is really relevant for sound that needs processing. Games and videos have already been processed so, in short, they're fine.

[@Sprenklefish]

I have this interface. It works great with Cubase. But when I add an instrument track and add a vst, the DAW channel isn’t audible unless The Mixer is minimized! The track will actually stop playing when I maximize the Mixer. I hear the instrument monitoring fine but the DAW channel will not work unless the Mixer isn’t onscreen. This is odd, right?

[@Carlito-d2r]

So as you said I get no sound from my computer speakers as intended. I plugged in headphones on the 3.5mm jack in the front with my guitar but still no luck with Amplitube/cubase to get input sound. p.s. when i have windows sounds though the audient i still dont hear anything on my headphones which should work. Any help?

[@mudrahel.philosophovich]

Hi. Can you help me to understand if i can set iD button to mix knob to adjusts the signal level balance between the input signal of my mic jack and the signal from a DAW software?

[@dennispagliaro1306]

Is scroll control only available on windows?

[@surfbuhler]

Can you use a NT1a rode condenser mic into external mic preamp Gap73 > into la2a and 1176 compressor then > back into the line input of audient at the back ? with phantom power on or off ? ... not the di input but line in ? cheers

[@SrikantLive]

A comprehensive guide. Is it possible monitor from DAW with effects for example a reverb or EQ As we record vocals?

[@jaketeeling5679]

Yes, but you will have round trip latency (RTL). The sound coming into your ears with the reverb and eq will be slightly delayed.

[@mohanshiva_musical]

Can we add 8 outputs for 7.1 mix through adat in this model? Give suggestions

[@mattrickard2283]

I wonder if the optical input would work for say, plugging in the audio from a T.V. to get sound through your monitor speakers?

[@divaythfyr4251]

Good question. I bought iD14 over iD4 because of a few extra physical features, like more inputs and outputs. My guess is (don't have the optical cable atm) that there shouldn't be any reason not to work.