Audio HIFI upgrade on the cheapest BMW E91 / E90 E92 E87 E60

Vibe Powerbox Amplifier: amzn.to/3Z3JS2X
Interior tool set: amzn.to/3Y42Sga
Welcome to our latest video where we'll be upgrading the Audio System of our budget-friendly e91 Project. If you're looking to improve your car's audio system without breaking the bank, then you've come to the right place. Our e91 Project car came with a baseline stereo system, but we've taken things up a notch by installing a Vibe amplifier and some OEM Bowers and Wilkins speakers.
The Vibe amplifier is a plug and play solution that offers a significant boost in power and sound quality, without the need for any complicated wiring or installation. It's a great way to get more sound out of your stock setup without having to spend a fortune on high-end audio components.
We've chosen to go with the OEM Bowers and Wilkins speakers to maintain the car's factory look and feel while still getting the best audio experience possible.
In this video, we'll show you step-by-step how to install the Vibe amplifier and OEM Bowers and Wilkins speakers, providing you with valuable tips and tricks to help you get the most out of your audio system upgrade. So whether you're a car enthusiast looking to enhance your ride's sound quality or someone who simply loves to enjoy music on the go, this video is definitely for you.
Be sure to like, comment, and subscribe to our channel for more exciting videos on car upgrades and maintenance. And don't forget to hit the notification bell to stay up to date with our latest content. Thanks for watching!

[@davyvandeven5350]

Not use the gain for volume. It,'s to level your max output of your radio to your New amp. Gain low , radio to 80% , up the gain til the sound is not sounding crips and clean . Thats the spot for the gain.

[@garage.86]

oh thanks to be honest i didn’t know that iam not really into audio and hifi stuff i just tried to make the volum a bit louder and i will definitely try that thank u very much sir 👍🏻😊

[@sw2599]

Very nice

[@PlanetPOW]

Can you connect a sub to that amp?

[@gabrieldarzynkiewicz6928]

Cool

[@sw2599]

This vs oem individual vs logic 7 amp?

[@adamobrien2028]

Have you a link for the harness? I can get the amp

[@itsdakku]

does this work with the e90 hifi system?

[@mehmethussein5048]

Hi love you video. Would this work if you have an amp in the boot

[@costindoi]

Good job. Thanks for the idea. Cheap and easy. Good luck with the project!

[@garage.86]

Thanks! 👍

[@lovetocoachnifootballcoach4738]

Hi thanks for the video I’m considering the same thing just wondering did you keep the amp under the head unit or did you change anything thing? We’re you able to tidy it up any regards all the wires stuffed in along side it thanks

[@garage.86]

i keep it under the headunit it fits perfekt in there :)

[@maxl7827]

There are correct type speakers for your doors but bmw makes atleast 3 different types so you need to make sure you get the same ones

[@garage.86]

yeah i learned the hard way but i maneged to make them fit :)

[@kajakas4000]

Do you have info which series speakers would fit without cutting and messing with the panels? I am going to install the amplifier behind glovebox and also add in the hifi tweeters, but still need to think something about mid speakers.

[@garage.86]

i dont know for sure but i think a good opiton is Logic 7 speakers for e90 series they should fit without cutting i guess :)

[@sw2599]

Individual speakers

[@theemkay11]

Does this amp works with bmw f10 with CIC? Or do they sell something similiar like this? Thank you

[@milchpulverkakao4917]

It works with all cars/ radios if you can get a t harness

[@CsFanatiker]

How do I replace the stock amp in the trunk with the vibe 65.4 because the connector that is plugged into the original amp does not fit the vibe amp at all.

[@garage.86]

the vide is just for cars without a factory amp intalled if u have already hi fi system from factory u cant use it i think

[@AshwinLB]

What’s the recommended amp upgrade for logic7?

[@garage.86]

logic 7 is already a good soundsystem idk how u can make this even better :)

[@DK535_]

diese voicecracks hahah

[@giuliamajanapoleone8567]

🔝🔝

[@worksmartnothard163]

E65?

[@aousalbaharani3337]

Hi, very good video and explanation. I have one question, can I use the RCA output to send signal straight to my Subwoofer that has a built-in amplifier? Thanks for any help

[@garage.86]

i use audio output directly from the headunit to the subwoofer but iam pretty sure the audio output from the amp will work aswell

[@aousalbaharani3337]

​@@garage.86ok thank you

[@aousalbaharani3337]

​@garage.86 thanks for your reply. I have connected the 2 harnesses and I am left with 2 unconnected wires. The Orange one is coming out of the white plug that goes into the amplifier and the Red one is coming out of the male plug in the middle of the harness. I know one can be used as the Remote wire to give signal to my boot subwoofer, but I'm not sure which on. Do you know by any chance?

[@mg4263]

I am thinking about buying it for my E60. Do you know where I can put it in an E60? Underneath the Stock Radio?

[@mg4263]

I managed to place it beneath the radio where the ashtray cover slides in. This was possible since my E60 just had the most standard BMW Radio installed without Navigation. Fits perfectly down there including the whole cable stuff. Then i replaced all speakers with new ones from the company Axton. Also the under seat „woofers“ which only were 16 cm ones from BMW now Axton 20 cm plug and play Fitment. The Sound is incredibly rich and bassy and this even without Subwoofer installment. The rear speakers in the hat rack also 10 cm ones make a little rear fill, but actually you could leave them stock 😂 If you want to have more clarity sound with a good listening experience the Vibe Powerbox 65.4 is perfect. If you like more db and like a rolling discotheque, you better get a stronger amp which is connected to the battery with a rms power of 4 x 150 W or greater.

[@aousalbaharani3337]

​@mg4263 Hi, whats the best setting, in terms of HPF/ Full for Front and Rear channels?

[@mg4263]

If you just have speakers like I with no Subwoofer I had set it to FULL for all channels to get the most power for all speakers. With HPF or LPF the amp will cut out certain hz on the Upper ( HPF ) or Lower ( LPF ) frequency hz sounds.

[@micdev42]

The amp you show at the start has RCA leads for low-level inputs. You did not show the amp wiring harness. The CCC only has high-level speaker outputs. How was the amp connected? Were there line converters involved? It would have been more helpful to show all the bits before connecting and explain what each does. As it is all I can see is a mass of wires: not that helpful.

[@garage.86]

The amp comes with an adapter harness and u basically just plug it in between the car harness and the stock Head unit u cant plug it in wrong

[@numanumas3365]

Did you run new wires to the rear door speakers?

[@garage.86]

no i used the existing wires, also the speakers have the same connector as the stock ones

[@konstantinost3521]

@@garage.86 did you have speakers at rear doors? Or you added them?

[@kamurankizildemir-wq5uc]

Warum wieder auf Englisch?? Wenn du die sprache eh nicht beherrschen kannst !?!

[@garage.86]

🤡