Guys thanks so much for providing this content with Wlfried, he absolutely took us to school and dropped some interesting science on this topic. I’m eating this enlightening information up which to me is eye or in this case ear opening. I’ve recently reconfigured my setup to Auro 3D specs and wow what a difference. Using the Auro up-mixer on the notoriously bad Atmos mixes really makes a huge difference. I turned off all of my bed layer speakers and tested Aqua man and other movies and was pretty upset at the piss poor performance from the Atmos format. Thank you to Stop the FOMO and Patrick from Grobitv for that demo as well. Once again guys hats off to you for providing us with this type of access with the creator of, IMO, the better of all the formats. Please bring Wilfred back for another session.👍🏾
@jmmontegnies93113 жыл бұрын
Thank you for this very interesting video. I live in Belgium, I have a 13.2 installation with a Denon AVC-X6700 and Monitor Audio Loudspeakers. I've placed the loudspeakers according to the AURO 3D recommandations. I must say it sounds really A-MA-ZING! Auromatic works very well to and I "rediscover" some recordings with Auromatic. It sounds very natural. Congratulations and many thanks to Wilfried
@ItzProNoobBro3 жыл бұрын
Loved it ❤️. Really, this man is a genius of audiophile!!🤯 Thank you guys for this interview👍🏻We can hear him whole day👏🏻👏🏻
@nedkulic21643 жыл бұрын
So FANTASTIC.... Well done Chana and Joe.... Welcome Wilfred..... So Good to hear more about Auro-3d.... Hopefully more and more Companies will listen in..... 👂🤜🤛
@Psyphonyx_Life3 жыл бұрын
VIP chat was still going at midnight... This was such a really good vibe and deep coherent dive into how Human Hearing functions and how/why Auro3D Sound Immersion is better suited to deliver a better sounding performance from many different configurations (keeping in mind the ears cannot be lied to with regard to location) I thoroughly enjoyed this one.. and watching everyones mind get blown... 🥳🥳🙏🙏🙏 Cant wit for the Auro3d Take Over - Part 2!!!
@missing11023 жыл бұрын
This taught me so much. It was like a university lecture.
@heimkinobinaptikum83373 жыл бұрын
Thanks for the interesting video with Wilfried Van Baelen. At time stamp 1:19:30 Wilfried mentioned an „interesting document written by a german guy“ You can find my „One-for-all-setup-Guide“ as PDF download in my facebook group „Heimkino und 3D-Sound“ in the file section. Alternatively you can google for the keywords „one for all grobi“ to find a direct download link.
For me Auro is the best upmixer for stereo music. Congrats and hope to see more content and more receivers / processors with Auro (looking at you Nad) :)
@alexandsimba3 жыл бұрын
Not just music, it's the best at movies and video games when done natively. They worked on a horror video game, and that legit was terrifying.
@TheDuckbacker3 жыл бұрын
Will we ever get native Auro-3D 4K movies released for the American market?
@Vinyl-Go-Pilates_Reiner2 жыл бұрын
Great discussion!
@noahnovotny21003 жыл бұрын
So disappointed that I missed this live but I went fishing. I’ll be staying up late to watch this for sure
@alexandsimba3 жыл бұрын
Same. I setup my room for Auro 3D, and would have loved to ask him questions.
@Svedla Жыл бұрын
I just want to know how I can have the Auro 3D format on Nakamichi’s Dragon Soundbar which is going to be released soon, thanks.
@TheJoeyPeacock3 жыл бұрын
Joe, you mentioned (around the 33-minute timestamp) that you're unable to hear "outside your room" when listening to immersive sound. So I understood you saying that your speaker positioning is the limit of the sense of spatial depth. (Please correct me if I misunderstood) Try this experiment: Go to John Wick 3, at the beginning of the Contential Assault sequence, right where they drop the needle on the record...in a system with a great immersive processor and properly setup & calibrated speakers, as the view changes from the weapons vault to the hotel lobby, you can "hear" the space size change *dramatically* . I'd be interested if you'd share your thoughts afterward. Thanks!
@DailyHiFi3 жыл бұрын
I will have to check that out. - Joe
@fundip433 жыл бұрын
I think this kinda speaks to a cathedral effect . The room grows with the depth of a room reverberations . I’m not sure how well this is accounted for in sound mixing . For instance sound objects in different environments reflect sound differently sound objects in say a submarine may not work as intuitive as in open environments. I guess that would be artist based master; what ever the master is trying to invoke with the sound and characterize with the sound object is correct in nature. From that point it is whether the sound master style is listener appreciated or not.
@joentell3 жыл бұрын
@keepingupwiththejones We talked with Wilfried till 7:07PM PT. That's 3hrs+! LOL!
@heimkinobinaptikum83373 жыл бұрын
These 3 hours should also be available as stream. :-D Maybe you can also link my „One-for-all-Setup Guide“ in the video description. Wilfried mentioned at time stamp 1:19:30 an „interesting document written by a german guy“. I am the author ;-).
@joentell3 жыл бұрын
@@heimkinobinaptikum8337 link it!!!
@heimkinobinaptikum83373 жыл бұрын
@@joentell I added the link at your facebook website below the video announcement.
@heimkinobinaptikum83373 жыл бұрын
@@joentell Also sent a private message via FB to „Daily Hifi“ with the link.
@heimkinobinaptikum52293 жыл бұрын
@@joentell I cannot link it by myself because youtube auto-deletes all links to websites and all html code in comments. Only in the video description it is possible and allowed to add links. So you have to take over. Thanks in advance.
@skypallman6169 Жыл бұрын
Nice job on the audio guys! 😂😂 Alanis morissette level ironic
@johngammer93843 жыл бұрын
Papa Jack. Is there a listing of Auro 3D music that is available in North America. Is there a way to access Auro 3D music that is produced in Europe?
@Mymoonization3 жыл бұрын
Good interview guyz !!!!
@fundip433 жыл бұрын
Is their no need for a floor upward or bottom dimension of sound? I think it work well in a instance of say a jaws movie or something thoughts.
@ericaljets62723 жыл бұрын
in one of these videos u guys mention a setting in the receiver that enables or improves the auromatic upmixer? PCM? Can’t remember - I have 6700H… HELP!
@SpiderMan-aa3 жыл бұрын
Just got auro 3d. Should I lower my side speakers to ear level and place my height speakers above my sides or leave the sides where they are (they sound great there) and place the heights as surround backs?
@AceVPD3 жыл бұрын
Might depend on your receiver. If you also want Atmos to work, Denon and Marantz recievers need the Auro 3D rear heights to be at the rear above where the 7.1 rear speakers would be. Or at least that is how they are mapped. You could always try moving them and comparing
@Usman0128133 жыл бұрын
Did you ever find a definitive answer to this? From what I can tell, it looks like the optimal Auro layout does not involve rear heights. Rather it involves surround heights directly above the surround speakers. In which case, my thought would be that you would be well served to bring your side speakers to ear level and mount speakers directly above them (pointing towards the main listening position). I haven't tried this yet though and its just based on what I have been reading. I would be interested to know what approach you decided to take and how you like it!
@stallebrass2 жыл бұрын
If auro 3d is about reflections and largely channel based does that mean dipole/bipole speakers make good surround speakers again... as they're not for object based atmos?
@stallebrass2 жыл бұрын
Nevermind... kzbin.info/www/bejne/hHilg2CAopehqq8
@alexandsimba3 жыл бұрын
I love Auro 3D but these folks need to reach out more to the media market. Imagine seeing them do a demo for Good Morning America, or Linus Tech Tips/Marcus Beownlee.
@timchromecast Жыл бұрын
The market is dominated by USA... how can a small belgian company fight against this? It's David vs. Goliath. For those interested, some Belgian 4K releases like Operation Fortune have Auro 3D.
@felixgamer6663 жыл бұрын
I have a question. Does we also get the Auro 3D effect from a normal headphones plug into denon? It only got a left right speaker .So is it a 13.1 or 9.1 from the headphone. And also does it sound better than a normal speaker layout ?
@sergiobarrena66263 жыл бұрын
hello. very informative stuff. just started watching many videos on youtube regarding auro3D. seems like a good option to improve as has been stated "bad atmos". My question is, if going to a 10.1 set up....where do the rear surround and height speakers go? from all the images i've seen it is a little confusing. Typical 5.1 set up places the side surrounds in the back, several ffet away from MLP, if you have the, then the heghts right above them. However, i have also seen were the sides are about 110-120 degrees behind MLP and heights are above...do the point INTO the room, or towards MLP? So basically means there are NO speakers at all along rear wall? any pointers/tips would be appreciated. thanks for the content.....
@Foreverjazzfan Жыл бұрын
Set your rear surrounds about 5-6 feet apart from each other. Angle the left rear surround towards the right front and right rear towards the left front. Put your front height speakers directly above yours front L and R. Then put in direct line from the right front height to the right rear height and the same with the left. This will cause the dome of sound you’re looking for.
@abap-gaming3 жыл бұрын
I look forward to trying Auro 3d in the future. Hopefully Sony adds in Auro 3d as well.
@srikanthsbk3 жыл бұрын
Why does Wilfred say 5 bed layer speakers (9.1) are better than 7 bed layer speakers (11.1 layout). Wouldn’t the 7 bed layer speakers make it more easy for panning the objects in a car chase in the movies? For Atmos setups, I found the it was more immersive with the 7.1 than the 5.1 layout in the bed layer. The car chases appear to start from the front stage to the side surrounds and then to the rear surrounds. Won’t the same principal apply for Auro 3d?
@dfalekulo91383 жыл бұрын
The reasoning is for undetected spear emersion. At 90 degrees axis, ear is sensitive so sounds right next to it and so side pairs seem to sound obvious. The idea is to keep everything uniform in a dome. He believes delays and distance won't make up for the obvious feel. Surrounds at 100 - 120 degrees feel less obvious
@bazdaish82973 жыл бұрын
This guy is just so interesting to listen too he really has got his act together.
@Foreverjazzfan Жыл бұрын
I have an 7.1.4 setup with front and rear height channels angled at my main mlp but while standing up not sitting. This puts the direct sound above my head. I also have the side surround speakers elevated the same height as my front and rear height speakers but angled directly at my ears while sitting. I run every movie with the Auro 3D upmixer set at 14 and talk about a sound bubble or immersive sound, it’s amazing. I would highly recommend you all trying it.
@Foreverjazzfan Жыл бұрын
I would recommend bumping the height speakers about 1.5 to 2 db hot.
@CriPPleR_HD3 жыл бұрын
Did Auromatic come up in the post show? Was disappointed that it did not come up at all during the live stream. I do like Auro-3D but unless something changes soon, it is just not going to be a thing in the states. Where Auro could find some success here is with it’s up-mixing. Would have loved to have had one of my 3 questions re: up-mixers asked during the live stream. Other then that, loved the guest. He made a strong case for his tech.
@joentell3 жыл бұрын
He's planning on coming back next Monday!!!
@38special4ever3 жыл бұрын
@@joentell Please ask him how Auromatic avoids collapsing to the center channel vs other upmixers.
@RobertPage19683 ай бұрын
I wish I could afford an Auro 3D setup. I will be forever stuck with a 5.1 setup 😢
@Triggaaar3 жыл бұрын
Welcome Wilfried. Congrats on Auro 3D, I'm completely sold. This is long shot, in case an expert can answer: I'm setting up the Denon 8500 to use Auro 3D 13.1 as well as Atmos. I'll have 7.1 base channels. The amp says I should have the surround/rear heights setup as Rear Heights (because Atmos won't work if they're called Surround Height), but if I were only doing Auro 13.1, Auro would prefer they were called Surround Heights and placed above the Side Surround speakers. So I will call the Rear Heights, because I have to, but where should I put them (for best Auro results)? 1) Above the Rear Speakers (at about 150 degrees from the front centre) because that's what they're called 2) Above the Side Speakers (at about 100/110 degrees) because although I've called them Rear Heights, Auro will still work best if they're placed as Side Surround Heights 3) In between options 1 & 2 (but then not directly above any base channel)
@CptaiNPogo2 жыл бұрын
If you want to run the best Auro3D set-up, they recommend side surrounds heights(directly above your left and right surround) but that will not work with atmos. If you want the universal layout for it to work with both atmos and Auro3D, use rear heights directly above back surrounds. I have the second option, universal layout so my speakers work with any format! Hope that helps.
@Triggaaar2 жыл бұрын
@@CptaiNPogo Thanks for the reply. I've built my room and allowed for switching between rear heights, for multiple options, but right now I've got them directly above the side surrounds. I'm not sure it's right to say it 'will not work with atmos'. The speakers are in line with front L&R, and behind the listeners, just not quite as far back as Atmos would like. I see the pros of the option you chose, but it's not quite as ideal of Auro 3D. Either way is a compromise, but I will do lots of testing before deciding on final positions.
@CptaiNPogo2 жыл бұрын
@@Triggaaar When you are in the amp assign menu, if you have it chosen for LR side surround heights, those speakers will not receive any information from the receiver if you’re watching atmos. It will be completely silent. If you don’t believe me, look at the bottom where it says “support format:” side heights will only be auro3D and DTS:X. All your other speakers will work and play sound with atmos, just not those side height surrounds.
@Triggaaar2 жыл бұрын
@@CptaiNPogo You misunderstand captain - you call the whatever your amp needs them to be called (in my case, rear heights). I've place my rear heights directly above my side surrounds at 110 degrees horizontal angle). Both Auro 3D and Atmos use them. They're exactly where they should be for Auro, and little bit forward and to the side of where Atmos would like them.
@CptaiNPogo2 жыл бұрын
@@Triggaaar so you’re designating these speakers as rear heights but you’re going to place them above your side surrounds(essentially side surround heights location). You will get sound on atmos and auro but now the sound will not be 3 dimensionally correct. Instead of a bullet going from front to back, you’ll hear it go front to back sides. If you’re fine with hearing sound not exactly where it’s supposed to go then that set-up works but I don’t see why you wouldn’t put your rear heights where they should, above the back surrounds?
@PowerrayX3 жыл бұрын
which movies have auro ?
@DailyHiFi3 жыл бұрын
You can upmix any content using the Auro upmixer. Native Auro, not many in the US compared to in other countries.
@melberg90983 жыл бұрын
yeah yeah top guy Wilfred
@VdomanZ Жыл бұрын
Ok….. wow! Huge difference watched every minute of this. Immediately moved my on ceiling at 45 degrees to be about 25 degrees above front and side surround. huge difference in height effects. Everything sounds so much bigger too
@datka32 жыл бұрын
Perfect timing for my speaker placement was not happy with my overhead atmos , will hunt for 30*
@andysummers4853 жыл бұрын
There is competition. according to barco site and nearest, auro3d cinema is showcase at southampton and when looking at the site it appears now that auro3d has been abandoned and only dolby atmos is use with something else called xplus? I wonder if screen or screens that have dolby atmos have a baffle wall behind the screen. 38 miles seems like a gamble if it has no baffle wall or even THX it won't draw me to getting on coach. I may as well stay at home. THX professional in my own home, professional THX cinema version. I can switch the AVR between any format with channel/expansion of up to 15.12.9 at 38.000kw THX, JBL professional cinema. I could expand auro3d from 13.1 to 15.9.9
@RogueHomeCinema3 жыл бұрын
That all makes so much sense….. may explain why so Atmos content is lacking…. Poor overhead placement… Speakers will be moving!
@oszkarhathazi23053 жыл бұрын
Yes , Auromatic is the best upmixer. Even better then native Atmos. Its a shame they didnt talk about it more. Aftershow for patreons ??? Pretty lousy selling trick.
@DailyHiFi3 жыл бұрын
How is that a selling trick? We stayed on talking for 2 more hours. If you don't value our time, then please do NOT join us. - Joe
@PIPERBOYWILLIAMS8 ай бұрын
I don't think auro 3d sound good
@FURognar5 ай бұрын
not set up right then. Auro does not sound good when using an Atmos configuration with the speakers on the ceiling. It sounds much better with the speakers in the "Height" layer, with speakers mounted around 30 degrees as opposed to typical 45 to 55 degrees Atmos speakers are mounted at. The reverse is NOT true. Atmos sounds just fine when the speakers are mounted in the Auro3D configuration (30 degrees). Thus I always suggest that people mount their speakers in the Auro configuration if they plan to use both Atmos and Auro3D. DTS:X also sounds much better when you use the Auro configuration....because DTS:X actually favors Height speakers over Top speakers.