How Much BOOST does my TURBO TD42 4x4 Make? DID it get TOO HOT!? | JRP 14in1 Gauge Install

[@jonnewton5929]

You young lads are Legend's in the making. Cheers fella's.

[@jayireland2526]

Had the same gauge setup in my gu for over a year now and it’s been flawless. Love having the egt warning to yell at me when I’m giving it too much up a hill😂

[@zanegleeson7922]

My Egt just reads 30° not even jrp can figure it out lol

[@jayireland2526]

@@zanegleeson7922 damn man that’s annoying

[@LucidSnapshots]

Negative Boost is how you are meant to read it. Thats when idle .. its vacuum so you need to set 0 boost when engine is off.

[@romulusoverland314]

Just as a matter of interest, I fitted a similiar unit to my Defender Tdi300 called the Madman EMS. I was shocked to see the old landy (518k Km on the odo) running at 760 deg C when at full boost. Nearly had a heart attack! Completely changed my driving style on old diesels after seeing that!

[@jaredcobbett6951]

On turbo diesel…big dump pipe and big exhaust is better plus an intercooler of some variation

[@andrewwilliams5337]

Finally put my order in for my hoodie. 👍🏻 Happy to support a bunch of young fellas giving it a red hot go.

[@patrickwarren9378]

Good to wake up to some Aussie Arvos in the morning🤙

[@MichaelWilliams-lg6oe]

Just so you are aware, this is actually a direct copy of a Japanese brand called Defi so be careful telling peopt to buy these over eBay copies as this is also a direct copy of another manufacturers product. Love your work though boys, keep it up 👍

[@deceebs]

At least theyre not pushing Rota's yet

[@DriftR_S14]

Took the words right out of my mouth here. I know these copies are appealing with young fella's that don't want/can spend the big bucks on genuine but justraceparts didn't "design" anything here.

[@bjones5240]

BUY REDARC made in australia

[@janeblogs324]

Good thing defi is 2nd best to stack. Can't get much better

[@Broseyyy]

Defi's is what 1700 plus, where the JRP is 300 odd for the same thing?

[@k9-unit-australia275]

Got that gauge in my GU. Had it in there over a year & have had 0 problems best money I’ve ever spent.

[@PatrolAdventuresAustralia]

Love your work guys. I would recommend a boost controller and a proper dyno tune to keep it safe and reliable. They are worth the extra bucks for sure. I have a GU TD42 intercooled with a 3inch exhaust and my figures went from 65.8kw (rear wheels) @ 9.9psi boost to 104.7kw @ 14.8psi. This is considered a conservative tune with great benefits. The factory intercooler did very little at this stage after which I upgraded with a large HPD top mount. Dyno tune was $320, Boost controller was $90. The intercooler was the expensive part ($2140) but I did the install myself. The way you guys operate you would have no problem installing an intercooler yourself. Keep up the great work!

[@keaganshaw7194]

Liam- Put a intercooler on it either a factory gu one but make sure it has a fan or HPD. Which I run are unreal and my EGT with 12psi sits about 220* at 100 and goes only upto 300* when I boot it cheers

[@stco2426]

Thanks for this. Been wanting to fit a simple additional temp gauge / buzzer but I think this will do so much more and be a great deal more useful . Really liked the way you positioned the camera on the gauge when describing, too. Top banana!

[@jessetink3753]

What a piece of equipment!! How cool is that… Wish I knew about that when I done all my gauges 👍🏽

[@yeahthebundys8391]

Yeewwwwwwwwwwww love the uploads on a sundey mornin!!

[@dinkybacon_9686]

I rember when we started from 7.3k subs and you guys are still good as hell

[@Littlebearearthworks]

Cannot wait for all the merch I ordered to get here! When my cars built lets go for a rip! I'll bring the drones haha

[@DeejayManii]

your boost was correct, it diddnt need adjustment, its reading negative while off boost as its in a vacuum.

[@jayarre1839]

shouldn’t be any vacuum at all on a diesel motor 👍🏼

[@jrc-3954]

@@jayarre1839 bruh....... It doesn't matter whether the engine is petrol or diesel, a turbo engine without any load on the turbo will have vacuum/negative manifold pressure

[@jayarre1839]

@@jrc-3954 wrong. diesels should not have any vacuum at all.

[@budgiebudgen139]

Could we please have a updated review on how the jrp is going? Cheers.

[@xander_m6968]

for sure will do a similar setup when i turbo my 106, love the vids! and just ordered a shirt! keep it up fellas

[@Sleep00013]

I just put one on my turbo 106

[@russell1359]

love your work , when you gonna stick some paint on the old girl?

[@PaddyBoy644]

That gauge looks like amazing value. Cheers Pat

[@erikmason3470]

Will be looking into this gauge for my Cummins isb4.5 conversion I’m putting in my wagon, I didn’t want to have a shit load of single gauges like I put in the TD42T cheers legends 👍👍👍

[@nolz262]

Great video guys! Mint bit of kit that guage is 👌🏼🍻

[@scowievideos7931]

Nice work Liam the GQ is coming along well mate. Liking the 14in1 gauge setup considering one for my ZD30 GU

[@andrewengland12]

So am I now wasn't keen on a redark for 450$ but also didn't want ebay gauges

[@darcykeddell4930]

@@andrewengland12 yeah 450 bucks a gauge is a bit steep

[@JayHampson-d5u]

Hey lads. Which is the video that shows the install of the sensors? Cheers

[@Mckee11]

How these gauges going few years on ?? Look awesome

[@simonmusicka5552]

Hey I have just installed the same gauge how did you calibrate ur boost back to 0 cheers simon

[@gettingoneadventures5439]

When’s the coil conversion coming ?

[@jesserowe5346]

My favourite pub right there hahaha all you lads locals ?

[@FinnTheMilky]

EGt wise, it depends where your sensor is if its pre turbo you can go 700+/ or 800+ for short periods Post turbo 550~ max generall

[@FinnTheMilky]

That being said my High roof LWB, with a full 3" Straight through with fuel screw almost maxed out never went over 500 post turbo

[@keaganshaw7194]

550* is max EGT FOR td4.2

[@donaldwills2135]

550 post turbo. 700'pre turbo. I hit 800'plus up some big dunes tho no issues

[@jetstream454]

@@donaldwills2135 Why higher without boost? Did you have the fuel screw right up?

[@jetstream454]

@henry Ohh lol of course 😂 Cheers

[@jamescleaver6749]

This is an NA blacktop with thinner piston crowns. Few posts online reckon 475 max. I wouldn't be running mine up to 550

[@donaldwills2135]

@@jamescleaver6749 good point mate. I ran my black top big pump 20psi loves life but definitely can't trust those as much as factory turbo or silver top

[@dennisdwiky]

Might have to get one! Like the look of them

[@danielshelseatual8883]

what is your turbo pressure? please

[@reece8570]

Your egt’s will stay relatively high with no intercooler and on hot days with throw your AFR’s out, a cross country intercooler is quite expensive but worth the money

[@PatrolAdventuresAustralia]

@Reese 8. Agreed mate, an intercooler will keep EGT's under control. I went for the HPD Pro myself with great results.

[@brianlewis3208]

how is the setup working over time,would it be better to place the control box under the bonnet then you only need to run one wire through the firewall.

[@AussieArvos]

I wasn't sure on how it would go with heat, and water so I put it in the cab

[@ryankitchen8526]

can't wait for my mech less go!!!

[@WDMTAdventures]

Hey Guys, I was going to order a hoodie but you only have them in 3XL, I'm a big bloke so I'm not sure if that size will fit me... Love that gauge, I might fit one to my 80 series, will you have a discount code in the future or is that grasping at straws?

[@LochieCondon]

Negative boost is normal? You see all the new cars on idle they create a vacuum?

[@hobsonsoffroadandcustoms4918]

A diesel does not make vacuum That’s the reason that have a vacuum pump

[@marcusnalder4237]

Hey boys just got my new jrp 14in 1 screen was just wondering if your screen come with a mounting bracket and if the controller box come with the wiring to connected to power cheers

[@AussieArvos]

Yeah it should ! ours did, but if you've got any questions i'd just hit up JRP, they are pretty good at responding. cheers :)

[@KINGKROOKED]

Hey mate are u running ocams or soemthing else. I need new mirrors but don’t really wanna spend $600. Cheers

[@xavierhart695]

Good setup mate!

[@keeganholland8372]

Would of considered getting one of these gauges if you boys hooked us up with a discount code

[@cwisking]

Yea I'm keen on one as well. Hook us up with a discount code guys!

[@bullzye101]

awesome stuff kewl looks good as well sweet yeh its got the main inputs you need . same inputs as mine but ive got gauges.. big thumbs up

[@stupidmonkeykev]

Boost should be 0.0 when engine is off, not at idle.

[@joshbevan9400]

Yes, because at idle it is under vacuum

[@callum5181]

@@joshbevan9400 not with a diesel no vacuum

[@kingmarz3635]

@@jasper287 Callum is correct diesels have no vacuum that’s why diesel boost gauges start at 0

[@callum5181]

@@jasper287 no throttle body how could kt have vacuum 🤦‍♂️

[@callum5181]

@@jasper287 a pulse is not a vacuum. Petrols have a throttle body when its shut the engine is still rotating drawing air in if no air can get in you have a low pressure vacuum. No fuck off

[@elliotsaxon7070]

Seems like pretty good value !!

[@luxy1265]

When are you guys making a windows sticker

[@kitchy98]

Wishing I knew about this guage setup before doing mine, I spent about $550 for 2 dual digital saas and pillar pod 😢

[@rob45x]

You should zero all gauges with ignition on, engine off. Boost is usually negative while idling.

[@marcbusby3625]

Not on a diesel, they don't make vacuum hense why diesel boost gauges don't have provisions for negative pressure

[@samjohnstone9323]

Can these run on 24V system? .....bloody safari's

[@Wobbz9413]

Another great episode guys. Thanks. Want some merch, but pouring money into the pajero at the moment, so merch will have to wait....😆

[@alisonphilp7497]

Love that bit of kit will check it out cheers and ordered me a shirt an sticker lol cheers guys

[@Sleep00013]

How did u set the boost at 0???

[@benlansdowne4502]

Just installed one of these on my td ute cant figure out for the life of me how to calibrate the boost to zero how did you do it

[@MrSany24]

Hey there, I was trying for ages to do this as well. In case you haven't figured it out you have to turn the ignition on to turn on the unit, slide the switch to SET on the remote, then press the WARN.SET button, then highlight BOOST on the screen (should be the first one), then hold the WARN.SET button until you hear a single beep. It will now be calibrated to zero.

[@joseph8852]

Video title should be “sales pitch for JRP gauge “

[@justinschultz7460]

Can u change the display colours on the gagues

[@332ARA]

what did this cost?

[@alexmcgregor8946]

Are you gonna get a stanio snorkel

[@zacthomas1075]

Look into raptor coating your cab and tray! 8L would do the whole thing and make it looks unreal only downfall is the paint.

[@BangersEnduro]

Please no raptor

[@philipwatt6183]

Raptor looks worse.

[@zacthomas1075]

You can adjust how you want it so it’s glossy and not so mat and rough

[@bigoz1734]

That's a great kit, looking into it now thanks to you guys

[@oscarkelly2462]

Been waiting all wore yewwww bloody legends

[@TheShooter466]

Does their stuff offer GPS speed sensing?

[@willreed6231]

400 and below is rookie numbers mate. 500 is my safety number

[@leonardpersin4255]

Onya boys

[@grahameroberts8109]

I took a shot every time you said ‘like’. Now I’m paralytic. 🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃🥃

[@janeblogs324]

Cmon he can't even grow a beard yet, give the young one a break

[@neilodonnell4072]

Not bad guys

[@andrewcoulter323]

Haha your EGTs would be fine up to 550°, even 600+ would.be fine, time so they're go up to 400° then slowly climb from there

[@thomasrennie-hynes778]

Knowledgeable blokes 👍🏽

[@yam8gille]

Negative boost is vacuum which is normal

[@dinkybacon_9686]

All U need now is a stainless steel exhaust

[@bluntobject4084]

Aaand I now regret not buying one of those.

[@adamjones2025]

I would say more bloody boost than a Stock zd30 engine.

[@darcykeddell4930]

more than 16psi?

[@stephenburrell7645]

Has anyone else yelled it should be in vacuum at idle!?

[@chrisalston5772]

Td42t gu patrols get to 700 egt from factory cause the exhaust is too small and chokes em up that’s post turbo not pre turbo

[@arturobayangos1223]

You boys are beli beli gud (hongkong version). soyoungsogood.

[@garethmcgregor1621]

Nice,👍

[@MrDblak11]

So it cost $300 all up for the everything for the gauges

[@janeblogs324]

? You tell me

[@psy06]

wtf is up with your mirrors ? so far down the door ?

[@brockneville-cd4ej]

I hope this wasn’t a paid advertisement 🤦‍♂️

[@keeganholland8372]

450 egts is nothing for a td42 that’s very low boost with no fuel really

[@Australian_Outdoor_man]

👍🇦🇺🍺

[@MonicaFerreira-s6x]

Arvos you are just becoming more and more boring annoying. Sound like a expert I doubt

[@AhmadAliKohi]

Bro nice video but can you not make a sucking noise time to time it ruins the video