Autel Evo 2 Pro Log Color Grading for Beginners 💪

[@xavier_arthur]

Film on Days when the Sky is bright & Clouds are Puffy for best results 😊 Now get some 10Bit D-log in your life 💪 Happy Flying 😎

[@pisec3788]

and Adobe Premiere Pro&?))

[@randymcneely4983]

Ok you have my rarely given rapt attention. It is hard to find love for Autel on YT. MavicMini and EVO1 flyer here in need of an upgrade. (I just sent you some support on Super Chat. Hope YT doesn't take it all...lol)

[@mickeymch876]

@@randymcneely4983 I love my Autel Evo 2 Pro. I just don't get a lot of time to fly it and finish dialing in the camera settings because I usually rotate all my quads. I dialed in the quad, it flies great. I have a version 1 so the chance of getting a smart controller is nil. Last week I bought a Sky Fire Aerial controller enhancement kit, took about 6 days from ordering till it arrived. It solved the most of my controller issues, the poor balance, hitting the programable buttons by accident and weak cell phone clamp are things of the past. Now that Autel updated both the explorer app and firmware I programmed one of the buttons on the back to switch between Standard and Ludacris mode, no more setting screen to change modes.

[@dronewave77]

At night in the city is what i luv 2 c but u gotta haz big nutz coz it can get scary af at night in the city when ur drone signal just cuts off

[@SW-Video]

Your tutorials are among the very best on KZbin. Thank you and I hope you continue to create them for many years to come.

[@GAKTomory]

Thank You, great start to finish video, kinda gets you in the door without being to long.

[@stanvisualseychelles932]

Really nice man. Thank you. This is the best grading I've seen so far on the Evo 2 pro for log

[@xavier_arthur]

Thank you Stan 😊

[@hdemetri]

Well done. I used iMovie in the past with my Spark and Mavic Air 2 which was adequate for my purposes. Since I upgraded to the Air 2s 3 months ago, I started practicing with Davinci Resolve. The learning curve is extremely high but I am getting great results as I gain experience with the software. This tutorial is great and confirms that I am on the right track. Let's see some more tutorials like this.

[@PicturesofNewYork]

In Davinci use the waveform and keep the highlights just below 1k and shadows above zero.

[@dieselman7453]

Thank bro love your videos I love my evo 2 but have to learn how to use it properly 😀I live in Ireland 🇮🇪 but spent 20 years in Nyc , Bronx , and sheep’s head bay Brooklyn, got to get back for a trip all my mates are still there , great videos man I learned a lot from you thanks again stay safe 👍👍

[@edycafe]

Always nice to watch your videos! Thanks 😎

[@xavier_arthur]

Thank you 😊

[@MichaelMuni]

Just in case you didn’t know. Autel provides a LUT file for the Evo 2 Pro. This lets you apply the LUT to the Log footage and it brings the image to a normal looking color, you then can tweek the colors to your own liking.

[@xavier_arthur]

I do have the autel lut and I tried it but it's not my cup of tea, just too many alterations to get it to my taste so I rather start from scratch. Thanks for sharing Michael

[@SW-Video]

There are some decent Fujifilm LUT's that work well too. Specifically the XT2 Eterna 709 rec LUT's. Free from Fujifilm. You might give them a try. I learned of them from one of Ken Dono's vids.

[@xavier_arthur]

Yup, I saw that video, although I thought it was Air 2s D-log 🤔 Should still look good either way guessing.

[@SW-Video]

@@xavier_arthur : I just experiment until I find a handful of LUT's I like then use one of them depending on footage. It's just a starting point that gives it a jump start. Lut's are definitely not for everyone. I even use a GH5 mirrorless cam LUT sometimes.

[@xavier_arthur]

Whatever Works 💪 #UseIt 🙂

[@FlyZoneFpv]

Great tutorial Xavier. Right on brother 🤟🏻 we need some 10 bit and Color grading in our life!!!🤣🤣

[@xavier_arthur]

LoL 🤣

[@edwardsonlinemedia6209]

Thanks for that - looks easy. Going for my maiden flight today and have set it up for log. I'll see how I go as I edit in Premiere. Cheers.

[@brettmurphy8715]

Thanks!

[@philhechle5175]

It’s quite advanced stuff, for someone like me, but I still learned a few things, so enjoyed watching your video.

[@bobhaack6447]

Thanks so much for sharing your insight!, knowledge, and recommendations!

[@jaydub5728]

Thank you! Excellent video teaching, very informative and helpful! Subscribed and liked!

[@thedarkriver1]

I love this video bro😊👍 so glad you shared!

[@kelviskelvis7140]

Nice content, easy flow with your instructions - Thank you for sharing. I now am inspired to try 10Bit D-log shots on my Air 2s. (1st Drone for me - everything has been 8Bit so far)

[@adamcrealestate]

I just got the Evo pro 2 v3 enterprise and I love it but the camera is more advanced than my knowledge. so thank you for this video

[@stanvisualseychelles932]

Would love to get a hold of the cube file for this colour lut. Keep up the good work. Even till today this is still the best camera drone on the market

[@7ishmael]

Very informative. I was debating on M3 or Evo pro….Easy decision. Evo 💪🏾

[@marctrainor5595]

Very informative. I just bought this drone, so I'm learning a lot from you here. I only have Premiere Pro, but I know it has a pretty robust color correction, at least good enough for my needs right now. You did a nice job here. Thanks for sharing this with us. Marc T.

[@danilomc9124]

Perfect! Thank you so much 🙏

[@glennleishman4134]

Great Video mate, im green green green with all this stuff but the way you explain it makes it easy to follow. Is it the same process for normal photo editing?

[@rhatcher5]

Fantastic tutorial, well done. Thank you

[@AerialMotionPhotography]

I don’t have an Evo or use FCP but I still found this video helpful!! Thanks X Man!

[@wamdroneworks]

Wish I was still living in Brooklyn. I could of learned a lot from you.

[@exploringparks]

Great work man. Thanks for all of the advice

[@hnoiankobohdan7182]

Thank you man. Good job

[@phillipkok6528]

Hi Xavier., May I know how to enable setting for 6k shooting as the max resolution is 5.4k

[@xavier_arthur]

Correct, Autel is rounding up. Max Resolution of the 6K is 5.4k

[@fingaldronephotography9162]

Please tell me what mount you are using looks good 👍

[@chadgilmore5046]

Could you send me a link for your detailed video on the settings for the GO.4 app for the Mavic 2 zoom 👍

[@masterjhon1234]

Do I use the same setting when I am doing night filming

[@OliverWolter]

While shooting in log dji has this pre-LUT box you can tick, so that you can have a better visual on the otherwise flat dlog picture. Does EVO have something likewise?

[@dojifly]

Very helpful. Thanks

[@hammockpro]

Ніколи не працював у Давінчі, завжди у Прем'єрі. Було цікаво.

[@FunCyclesCannonBeach]

Well done! Really nice tutorial! What device are you using as your screen/monitor in this video?

[@andrewbaerm.d.3984]

Absolutely fantastic videos. I just purchased the Evo2 Pro V2 and have a lot to learn. One question. I grew up in NYC and would like to film there but isn't LGA so close that one can't fly in many parts of Brooklyn, Manhattan and the Bronx?

[@dumontserge4819]

Great, many thanks, its helpful ! what about the special LUT from Autel for the EVO II Log ?

[@xavier_arthur]

I don't like Autel's lut Dumont, oversaturated and colors don't look accurate either for my taste. Thanks for sharing 😊 Check out my Evo 2 Masterpiece Playlist: kzbin.info/aero/PLsa8kxbNNuJjQ4TeQNadmRQlAvyDaSKG7 Happy Flying 😎 #TellOthersAboutDroneXfactor & #HitNotifcationBellForMoreVideos

[@dumontserge4819]

@@xavier_arthur I have tested today, I agree with you, its oversaturated !!!

[@masterjhon1234]

When I I am doing it do I use the same setting?

[@hybrydsanity5857]

how necessary are the ND filters and why , bc in manual don't you have a lot of control & this is getting sooo.. expensive lol

[@xavier_arthur]

If you do not use ND filters to darken the image while shooting video, then you're only other main alternative would be to speed up the shutter. Speeding up the shutter can cause the video to look very unrealistic. So if you want the most realistic Hollywood look in your video, you would need ND filters. I have a ton of videos on filters, you should browse through and check it out, might not be for Evo drone but the same concept applies. Thanks for sharing 😊 Check out my Evo 2 Masterpiece Playlist: kzbin.info/aero/PLsa8kxbNNuJjQ4TeQNadmRQlAvyDaSKG7 Happy Flying 😎 #TellOthersAboutDroneXfactor & #HitNotifcationBellForMoreVideos

[@dwightlewisdronography4137]

Can I use this same settings for mavic 2 pro? And davinci is the best 🙌🏾

[@rubinhodrone9204]

Passando para prestigiar aquele super like no canal 👍👍

[@64usmarine]

Nice video, Thanks!!!

[@MicheleBloodphd]

Super helpful video! I've got a question. Which sort of log footage does the Evo 2 pro produce? When using Davinci Resolve's "color space transform" in the Open Fx tab of the color page , which sort of log footage to input color space do I choose? Would "use timeline" be appropriate (maybe it's in the EXIF data?)? I don't see "A-Log" as an option. Thanks in advance for any advice!

[@karlr4481]

Let me know what you find. I'm also looking for the color space transform settings for Autel EVI II Pro log footage. I haven't found it yet. Probably some trial with the available settings.

[@EnglishTurbines]

Great tutorial, thanks, I know so little about post processing...🤔🤔😳🇬🇧😀

[@GizmoDrones]

I enjoy your videos

[@dronewave77]

What about filming at night in the city? I've heard LOG at night is not as good in cameras at night in low light but haven't graded the log from the pro2 I'm checking out different settings. I used 4k 10bit 400 iso for the 2 vids we just put up. We r just starting so i'll see which video looks best on yt coz their compression codec just murders good quality video

[@markreingold275]

X I'm looking for an all around good drone that has performance speed a good camera and sensors all the way around ..

[@koni-video]

What ND filters do I need to order for this drone?

[@xavier_arthur]

These are my favorite: amzn.to/3mlOKy4 Happy Flying 😎

[@EzmFilms]

Sick end result i use premier pro my mentors all ways trying to convince me the pros use DaVinci you got me with free and it looks pretty easy to use and similar to what i know already is it best for the evo 2 pro A log footage ?

[@xavier_arthur]

It's the best for color grading 👌

[@markasmith1822]

Ouestion,can fly my mini 2 in the snow.Not heavy but moderate.

[@rMr.big13]

So what do you prefer … air 2s or this autel?

[@Audiojoe90]

I just shot some test footage on my EVO II 6K, using the Autel settings exactly as you mentioned. I tried importing my clips with the H265 format, and it is not recognized by the Free version DaVinci Resolve (17.2.2). It gives a red exclamation arrow that says "Media offline" Looking online, its says that H265 is not supported in the free version of DaVinci Resolve... How did you get it to work?

[@thedarkriver1]

Awesome! You use DaVinci😎👍

[@jonaskristensen3066]

Very very cool bro. Have you any ideer if the rumor is true, that the v3 can’t log in 10 bits?

[@drone_labs_]

Nice Tutorial.

[@xavier_arthur]

Thanks 😊

[@irvdonaldson4137]

Greetings from earlier - 2 thumbs up - (code) Very comprehensive on the first pass. I will mimic side by side and hit you up.

[@xavier_arthur]

LoL 🤣 Ok

[@antjuanbrown1076]

Hi, I watched several of your videos on the Evo 2 pro and was considering maybe purchasing one is there any place you could recommend.

[@thrumyeyesphoto]

Great info, thanks for sharing! Autel doesn't make it especially easy to figure out the compatible 10-bit color modes. I really wish we could use 6k and still get 10-bit!

[@alexannis4740]

I have the Skyriot filters haven't tried them on my EVO 2 PRO yet, I think I'll start using them to get better video result. Though it isn't really that bad without filters. But I can see the difference without it, I read where filter are good in certain situation but not always needed.

[@vidailypro]

Good footage ❤️🇸🇧👍🏽🔥

[@dronewave77]

Good advice subbed

[@hybrydsanity5857]

thanks for you quick response !!!! much appreciated , looks like amazon, B&H, eBay or one of the other many other sources Ching !! : have a nice day :)

[@wamdroneworks]

Do you do personal online training?

[@carlahorne-calzada4627]

Hi, what laptop are you using with the Resolve?

[@droneviewgis6699]

Xavier, when did you start using DR? You have usually promoted Filmora. Anyway, something I started using recently is the Auto Balance as my first node. Then, six other nodes to tweak other parameters. Give it a go. It's the A with the circle around it next to the eye dropper on the far left. Good video, beginning to end once again. I miss my Evo 2, but I had to send it back. My horizon was always tilted worse than all the Fimi drones. Ready to sell my Fimi X8SE 2020. I am tired of the automatic vignette affect.

[@danbrockettDOP]

Great video! I'm thinking about upgrading my Mavic Pro to the Evo Pro II 6K. I have the 5.5" Crystal Sky monitor. I'm kind of blown away to see you using it with the Evo Pro II?!? Do you have to do anything to get that to work software/firmware wise? I was really bummed that I wouldn't be able to use the Crystal Sky moving forward but you seem to be making it work with the Autel?? Which mounting bracket are you using in this video to mount it to the Autel controller? Thanks man!

[@OliverWolter]

Just by coincidence I keep stumbling over your content - it is great. But it is not coincidence. I like your topics and I do like your approach. I find this very informative. I didn´t know that the 10bit were connected with so many if´s. Resolution = 4k, fps

[@AjaySingh-228]

Nice bro

[@PhilFlock]

Haha. The first shot. I have a shot just like it!

[@PhilFlock]

Even with the same drone!

[@koni-video]

Киношники используют 400 iso потому, что снимают в RAW. Если ты снимаешь в .265 тебе нет смысла делать этого.

[@simonwade613]

Great video, thanks!👍