Autel Maxisys MS908s Pro How To Code Airbag Control Module BMW C95429

Autel Maxisys MS908s Pro How To Code Airbag Control Module BMW
C95429 - Message (Driving Speed) Out of Date Receiver ASCM, Transmitter ICM.

[@TheFuneralDirector]

Nice ... A true master with the Autel, i've just subscribed and will be following along.. Take care, Regards Andy.

[@sadiagnostics]

Thank you for your feedback :).

[@Kuwaiti27]

Bravo, subscribed

[@don.timeless4993]

awesome video! im welling to buy the upgraded one of this (MaxiSys MS908S Pro II) so do this capable of programing new TPMS?

[@brhanetekie8558]

Keep it up bro.

[@sadiagnostics]

Thanks bro

[@lada1747]

Good 1***

[@checkmix902]

Thank you for showing this! Will it work with Autel IM608? Thanks

[@autoconversions7693]

I have an Autel maxysis pro but it’s subscription has ended . Will it perform this task or not ? Please guide through , thanks

[@rimvydasr2166]

Hi 😊 so if you buy autel maxisys ultra with MaxiFlash VCMI. Only you can do scanning? If you want to do programing you need to buy programing device separate?

[@zoticus1]

The module was replaced with a new or used one? What's the difference between this scab tool and the im508?

[@sadiagnostics]

It was replaced with a used one. Am not 100% sure you’ll have to contact autel or the the comparison by bringing both up on two different page. Thanks

[@aliones]

is this a good scanner to buy for e87 120d? i am interested in learning coding and programming instead of paying someone else.

[@sadiagnostics]

Hi yes it is, however the latest model has now changed and it’s Maxisys ultra Lite roughly £2.8k

[@SourceEastAnglia]

Will this code BMW 1 series (E) Range 👍🤞

[@miloradtovilovic6325]

Do you know if your autel device has to be up to date to be able to code/program?

[@sadiagnostics]

Yes you need to have constant update otherwise you can’t programme but you can use the normal full scan and activate test etc but not coding and programming

[@laurentium510]

How can I conected Without Wi-fi

[@Doctor_88]

Can autel loding data(firmware) from old module and save/copy to the new module without online data that need to download?

[@sadiagnostics]

No I don’t think that’s possible

[@sadiagnostics]

Depends what you use it for. I mean if it’s case of coding in new headlights without online then yes that’s possible.

[@laurentium510]

All the time should be off wi-fi

[@TheGambinoo]

you jump to fast you dont show what option you selected to get to the coding

[@sadiagnostics]

I think you need to watch the video again without you skipping any bits cause I’ve just rewatched it and I’ve shown you step by step what to do…