Autel volkswagen edc 17 immo data read on bench

[@stefanbujdei805]

I see y read the ecm after you made modifie the file how y write it back let me know yf you know how to write thanks

[@Stroe-A-Cristian]

Salut nu inteleg, ce vrei sa faci?

[@stefanbujdei805]

@@Stroe-A-Cristian I want to change the V number and turn the immo off and then after I save the file how I write it back on the same ECM

[@Stroe-A-Cristian]

@@stefanbujdei805 watch the video carefully if you can edit ,but you can adapt the ecu on the car if you read the data from both of them

[@user-gp8pd2vw7p]

Hello, what`s version of Autel?

[@Stroe-A-Cristian]

Autel im508

[@wiki-leak]

What are you gonna do with this saved data No way to write it back to donor used PCM No option on MaxiIM 608 to do it That’s mean this is useless

[@Stroe-A-Cristian]

You have an option to write data,i didn t try it, but i did swap a ecu with the read data with autel im 508

[@wiki-leak]

@@Stroe-A-Cristian how is it possible if you just read it? This procedure is to retrieve the CS code and PIN There is other menu in my MaxiIM “Engine Main ECU replacement (Guided)” At the end I got “ECM replacement succeeded” but the PCM still has a code “P1570 - ECM disable” and the cluster display shows “Immobilizer disabled” P. S. - original ECU starts the car but has a internal issue with a few injector drivers

[@Stroe-A-Cristian]

You got all that you need in the video,just need to pay more attention,but as i told you i did not tried that option because i didn t needed it,but you can try it

[@Stroe-A-Cristian]

This video is for those who needs to read the immo data somehow,in a situation when the eeprom from confort module is corrupt you can get the data like this,or when you you want to swap the ecu you need to read the immo data from sh(donor) ecu before the swap

[@Stroe-A-Cristian]

So if you have a situation you just have to ask if you don t see something that can help you in my video