Auto Tuning Your Harley With The Screamin Eagle Pro Street Bluetooth Tuner

[@HDVIBE]

Check this out an learn the step by step process to AUTO or SMART Tune your 2021 and new Harley Davidson Grand Touring or Softail using the NEW Bluetooth enabled Pro Street Tuner. Some have had problems with this tuner, however, if you watch this video and follow along, you will have no issues loading new maps or a SMART Tune recording onto your motorcycle. Thanks for watching, share this with your friends, comment below and consider subscribing to the channel if you have already done so. When you do subscribe, leave a comment below stating you are a new subscriber so I can reach out and thank you for supporting the channel. Ride safe and enjoy, Rick

[@anelperez1446]

Very good video, I have been issues connecting it. Thank you for your support. Anel.

[@HDVIBE]

Thanks for watching and commenting. I hope the video will help you out. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

[@88azturbo]

Approved! 2022 Road Glide Limited w/ Stage 1. This tuner works flawlessly for me. The Stage 1 tune from HD is good, but so much better after I used this tuner. Much smoother and responsive throttle. Some folks have issues with the app, but usually it's their phone/ blue tooth that's the problem. Also, I've heard, keeping the screen awake while doing the recording is key. I purchased the optional cable to allow tuning on my laptop as well, but the blue tooth and phone app is more than sufficient.

[@HDVIBE]

Thanks for watching and sharing your experience with the tuner. Your comment on the throttle response is exactly what I experienced when I did the base map upload. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👍👊✌️

[@andrewluberto]

you kept your phone awake while riding ?

[@HDVIBE]

Thanks for watching and commenting. Keeping the phone awake during recording is key to not losing the connection. If you ate already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👍👊✌️

[@andrewluberto]

@@HDVIBE Definitely will be getting a mount for my phone now on my motorcycle to make sure it doesn’t go in sleep mode ! Thank you for the tip also great video man I’ll definitely subscribe

[@HDVIBE]

@andrewluberto You ate welcome and thank you. 👍👊✌️

[@davidwuolle483]

Thank you for the follow-up on this tuner. I see yours had an update, so it will be interesting to see if mine updates as I had some odd errors when I tried to auto tune. I absolutely love your videos.

[@HDVIBE]

Thanks David for watching and commenting. The firmware update popped up as soon as the tuner connected to the app. Hopefully you can get yours going. Mine went worked flawlessly. Thanks for your support. Ride safe and enjoy. 👊👍✌️

[@coreyyancey9272]

I used a zippers performance cam instead of Harley cam and used smart tune feature on this tuner to dial the tune in and it worked great. I just had to lie to the tuner that I had a HD torque cam instead of the zippers cam and the smart tune sorted it out. Very cool product!

[@HDVIBE]

Thanks for watching and commenting with your input. What is the lift on the zippers cam? If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

[@coreyyancey9272]

@@HDVIBE lift is .470... seems really good.

[@HDVIBE]

@coreyyancey9272 Thanks for sharing that info. Much appreciated. 👍

[@HDVIBE]

@coreyyancey9272 I've been debating putting the SE8 462 cam in the ST. Harley considers it a power cam, and it has essentially the same lift and duration as S&S 465 cam.

[@DaveDetor]

Your videos are informative, well done, and awesome. I bought khrome werks pipes, air kit, and tuner. Installed and flashed in my garage within an hour. I’m going to smart tune next. Keep the great videos coming, they’re extremely helpful.

[@HDVIBE]

Thanks Dave for watching and commenting. I appreciate your very kind words. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

[@rcl6371]

Uh oh. Just found your channel. Going to spend too much time watching videos! Good stuff you do.

[@HDVIBE]

Thanks Colin for watching and commenting. I appreciate the support to the channel. If you have already subscribed to the channel...thank you. If you haven't yet subscribed to the channel yet, I'd be honored if you'd consider doing so. 👊✌️👍

[@robkapp8000]

Hey, great video. Very informative without a lot of fluff. I just installed this tuner on my 2023 RGS and programmed the base tune. Your video made it a snap to do. I’m going to do a smart tune this weekend. I also just subscribed to your channel. Thank you for the clear information.

[@HDVIBE]

Thank you, Rob, for watching, commenting, and subscribing to the channel. I look forward to seeing your comments on other and future videos. I'm glad the video was helpful and ride safe. ✌️👊👍

[@timleblanc7591]

Great video! Made my install tune easy peasy after watching. Thank you! Just actually did the tune and will test ride tomorrow. Only odd thing is after the tune, I had 1 historic code in the app that was not present beforehand. I know this because I checked being I saw somewhere while researching that someone had the same issue...figures I can't find that now but at least I know there were no codes present before applying the tune. The code is P1100 -abs indicates torque control fault. I cleared the code and turned bike on and off and code did not return. Wherever I read this from another post, the code returned after he had rode the bike and continues to have to clear it. Odd. Hopefully, that will not be the case for me. Have you heard of this happening to others Rick? Appreciate any 411 and again, thanks for the video! I quickly subscribed after watching!

[@HDVIBE]

Thanks for watching, commenting, and subscribing. I have not had that ever pop up with the tuner. Since it is a historic code...hopefully once you clear it, there won't be any issues. Thanks for your support and ride safe. ✌️👊👍

[@samw6239]

This video will definitely help me smart tune my bike once my screaming eagle system in installed next week.

[@HDVIBE]

Thanks Sam for checking it out. I appreciate your support. 👊✌️👍

[@JoeGoeMotorcycleAdventures]

Thanks Rick! Just put one on my 23 RG CVO. They only have one map for it. All I did was replace my air cleaner (for now) so I ran an auto tune this morning. Great content

[@HDVIBE]

Thanks Joe for watching and commenting. I'm sure they will update maps for your bike over time. Ride safe and enjoy. 👊✌️👍

[@user-ng8iq9bw4p]

I also have the 23 RG CVO. Will the one base map available and smart tuning be sufficient for a catless full exhaust?

[@HDVIBE]

With auto tuning you should be fine. The stock HD head pipes actually flow very well even with the cat in them. Without the cat you should feel a reduction in heat coming off the right side of the bike. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍

[@user-ng8iq9bw4p]

Subscribed! I'm just after the heat reduction. I know there's only 1 calibration available right now for this new 121 vvt and I'm not sure the smart tune feature is even available for it but I'll try. Great channel and info, thank you!

[@HDVIBE]

@user-ng8iq9bw4p The smart tune feature should work just fine. As Joe noted, he was able to run the smart tune on his 2023 CVO Road Glide with the VVT engine. Basically the smart tune reads parameters as you ride and records the info. Then based upon that recorded info, the tuner will adjust VE tables and then upload the adjusted map to the ECM...then you are good to go. Thanks for subscribing and I look forward to seeing your comments on other and future videos. ✌️👊👍

[@bobrose3298]

Excellent video Rick. My neighbor has this tuner and was not using it properly. I’m hoping to get one soon and this tutorial will be very helpful. Great job!!!

[@HDVIBE]

Thanks Bob for watching and commenting. If you follow the instructions as shown on each screen, the tuner works great. No problems and no errors. 👊✌️👍

[@dmraco]

Great video. I have heard you also can use these tunes to correct issues with LED turn signals rapid flashing. Is that true?

[@HDVIBE]

@dmraco Thanks for watching and commenting. You can clear DTC codes with the tuner. To get LEDS to work properly you just need to start 4 way flash while ignition is in run turn off ignition and keep flashers on for a 2 minutes or so. This will sync the BCM letting it know that LEDS have been installed on the bike. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

[@a.r.bigdog8957]

New sub! Thanks for the breakdown. Have to do the smart tune on my 2024 CVO. Didn't give me the option to program in regular mode. Only have 35 miles on her and installed the TAB Performance 50cals and screaming eagle breather. More familiar with the FP3. So I'm going to follow your instructions to a "T" Thanks again and ride easy brother 🤟🏾

[@HDVIBE]

Thanks for watching, commenting, and subscribing. I look forward to seeing your comments on other and future videos. Ride safe and enjoy. 👊👍✌️

[@BobThompson-h6c]

Thanks!

[@HDVIBE]

Thanks Bob. I appreciate the Super Thanks and support to the channel. Glad you found value in the video. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

[@joelasater6686]

Thanks Rick for the videos about the new SE Pro Street Tuner. Not many online tutorials available on the new one. I was apprehensive about getting one of these for my new Heritage Classic, because of the negative reviews on HD's own website. Kind of hard to get around the warranty thing though and still have an up to date tuned motorcycle at the same time. I added Tab Performance slip ons and the HD tech suggested I have it re-tuned. I went ahead and ordered the tuner and look forward to installing it. I plan on doing the basic tune first and then the smart tune afterwards.

[@HDVIBE]

Thanks, Joe, for watching and commenting. I have had no problems with the tuner. My guess is that people who have issues don't follow the step by step process and then get frustrated. The other thing is making sure your phone is close to the tuner so you don't lose the Bluetooth connection. Thanks for your support to the channel. ✌️👍👊

[@damuv]

I have same set up but mine seems to run hot. Did this help with that?

[@HDVIBE]

Thanks for watching and commenting. I can't say I'd the bike runs cooler or not but it's definitely not hotter. Often the heat is coming from the catalytic converter within the headpipe. If you go to a catless headpipe, you will definitely feel a reduction in heat on your right leg. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍

[@rwtrick]

Thanks, Rick, for a very informative video. I'm a new subscriber and am looking forward to viewing more of your content.

[@HDVIBE]

Thank you Richard for watching, commenting, and subscribing to the channel. I look forward to seeing your comments on other and future videos. Ride safe and enjoy. ✌️👊👍

[@hollywood93c87]

Great video 👍. I can’t wait to try this out but I’m going to have wait because winter has come to northern Alberta, Canada 🇨🇦. Ride safe✌️

[@HDVIBE]

Thank you for watching and commenting. I can certainly understand waiting until winter is gone. Thanks for your continued support to the channel. 👊👍✌️

[@RidersUnited]

Great option for keeping your warranty while enchanting performance. I like you can do it wirelessly. Cool gadget for real 👍

[@HDVIBE]

Thanks Art for stopping by today. I appreciate your support. Ride safe and enjoy. 👊✌️👍

[@RidersUnited]

@@HDVIBE sure thing 👍

[@martinkies6580]

Very informative, thanks. But I think the stock bike has narrow band oxygen sensors so the tuning is only in that narrow range where the sensors can measure (14 to 15 AFR). Anything with some throttle will revert back to the base map and no changes will be made.

[@HDVIBE]

Thanks for watching and commenting. You are correct...the stock bike has narrow band o2 sensors. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

[@wendtro623]

I just subscribed to the channel. Also just bought the tuner for my 2024 RG. Have a question for you, in the programming I understand power button but run start on the 24’s is push to start. Is there something different I need to do?

[@HDVIBE]

That is and interesting question. On my CVO, you just use the run switch but not hold it to start. My guess is the instructions online for the tuner cover that situation for the 2024s. Thanks for subscribing to the channel. I appreciate your support. 👊✌️👍

[@lksnort]

Well done! I subscribed…

[@HDVIBE]

Thanks Leroy for watching, commenting, and subscribing. I look forward to seeing your comments on other and future videos. Thanks for your support and ride safe. 👊✌️👍

[@michaelscotty1237]

Thank you for the video. I did my bike the same as you when I went back to try another recording it never stopped loading. Any suggestions Thank you again Mike

[@HDVIBE]

Thanks for watching and commenting. One suggestion is make sure your phone is not connecting to the infotainment system as well. I have heard that happens and causes issues with the Bluetooth connection between the phone and tuner. Perhaps on the infotainment system on Bluetooth set hit "forget" phone. Then give it another try. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍

[@bimjones8785]

I subscribed great job on this videeo

[@HDVIBE]

Thanks for watching, commenting, and subscribing. I look forward to seeing your comments on other and future videos. Thank you for your support and ride safe. ✌️👊👍

[@JRBACZYK]

Perfect for warranty reasons 🇺🇸👍👍👍

[@HDVIBE]

Thanks John for watching and commenting. Your comment is on point. Thanks for your support and ride safe. 👍👊✌️

[@NateHadad]

Thank you much, just I want to know I can leave the town on the bike all the time ?

[@HDVIBE]

Thanks for watching and commenting. Yes you can leave the tuner connected to the bike if you like. However, it's not necessary. I keep mine connected on my bike at all times. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍

[@mykul1000]

FYI - I had issue at first, unpaired my phone from Harley audio - worked like a charm when applying custom tune.

[@HDVIBE]

Thanks Michael for watching and sharing your experience. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊👍✌️

[@Dandre01]

I just changed my slip-ons to Tab. Changed my breather to SE wedge on my 23 CVO SG. I'm ready to install this SE Tuner. I dont plan on riding for the next week or two so i can't record. My question is: Should i wait to install this until i can ride at the same time? Thanks.

[@HDVIBE]

Thanks for watching and commenting. I would suggest first loading the base Stage 1 map and ride the bike for a tank or two before doing the smart tune sessions.

[@TrustyZ900]

Thanks for ll the important info. Bought a '23 Lowrider S with 800 miles on it. Had a 2BR shorty exhaust. The dealer gave me the screaming eagle tuner in the original box. Does the tuner stay plugged in to the bike or is it removed? I'm pretty lame when it comes to this. Don't even have a smart phone. Really cold in Idaho and I can't see the techs riding this bike around for 30 mins. I've already rode the bike 90 miles in freezing weather. Runs good, but idles weird. Hope I didn't hurt anything if they didn't complete the process. After I paid the dough, now they aren't real cooperative. Thanks.

[@HDVIBE]

Thanks for watching and commenting. So you can leave the tuner on the bike but you don't have to do so. If you run a Smart Tune session you must leave it on the bike as shown in the video. But once the tuning process is complete, you can take it off and put it in the box for safe keeping. My guess is you may need to run a Smart Tune session especially with the shorty exhaust to a better idle etc. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

[@TrustyZ900]

@@HDVIBE Yes, I've subbed. I can use all the help i can get. H-D's are a new experience. been riding for a long time, but mostly VStroms and Japanese 4 bangers. I will talk to the techs and get a whole maintenance record of bike. thanks.

[@HDVIBE]

@TrustyZ900 Thank you and good luck. 👊✌️👍

[@RustyTheBiker]

Does it have an option to upload the data to a server and have a tech look at the data and tweek it? I know that is how the FP3 worked and it was great. Those guys would dial in your auto tune.

[@HDVIBE]

Thanks for watching and commenting. It does not have the ability to upload run data to the cloud as far as I know. The only thing saved to the cloud are your smart tune maps. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍

[@MrPlaysand]

Great detail and easy to follow your tutorial here. I just brought home the 2024 RG and want to keep my warranty intact. I’m wanting to install a 2 into 1 exhaust and perform the tune myself. After watching this I’m seriously considering buying the tuner. Do you suggest I also replace the intake or is the stock one sufficient for a stage 1 tune? Thanks and I did subscribe

[@HDVIBE]

Thanks Scott for watching, commenting and subscribing. Congrats on the new bike. My guess is the breather is a high flow so probably no real necessity to change it out. The tuner is great and if you follow the prompts it's not that difficult to upload the Stage 1 base map and then do some auto tuning aftwards. I would suggest you double check to see if there are maps for the 2024s yet. I think I've read there is a Stage 1 map but nothing beyond that yet. Thanks for your support and I look forward to seeing your comments on other and future videos. Ride safe and enjoy. ✌️👊👍

[@MrPlaysand]

@@HDVIBE I really appreciate your reply. Safe riding to you as well!

[@HDVIBE]

@MrPlaysand ✌️👊👍

[@ChrisPaterson-mj8vr]

Subscribed!!

[@HDVIBE]

Thanks Chris for watching, commenting and subscribing to the channel. I look forward to seeing your comments on other and future videos. Thanks for your support and ride safe. 👍👊✌️

[@oz76]

Would you recommend a tune on a completely stock bike? If so how come? I have a 23 Street bob. Thanks!

[@HDVIBE]

Thanks for watching and commenting. If the bike is completely stock, I would see no reason to put a tune on a bike. Typically a tune is "required" when you do a full Stage 1 upgrade which would be upgrading the exhaust and the intake. At that point you have changed the amount of air coming into the bike and exiting through a freer flowing exhaust system...so a tune is necessary. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊👍✌️

[@onyong123]

Any issues with excessive knock counts? After starting to use this tuner I notice I get knock counts during harder accelerations and have no way of knowing if this is normal or something I should be concerned about. Have a low rider st with slip on exhaust.

[@HDVIBE]

Thanks for watching and commenting. I have not experienced any such issue since loading the Stage 1 map on the bike. The bike runs great and the throttle response is much improved. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊👍✌️

[@happyspearo4334]

I added just mufflers to my 2021 Fat Bob. Would I use the standard map or the stage one map to base my custom tune off of?

[@HDVIBE]

Thanks for watching and commenting. Since you put slip ons on the bike, use the Stage 1 map to start with then smart tune from that map. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍

[@mikepsl1519]

For those of you that have used this tuner, with a stage one upgrades, did you see a significant performance gain? After slip on's and new intake I'm just wondering if its worth the expense?

[@HDVIBE]

Thanks for watching and commenting. While I don't have dyno sheets, I will say the Stage 1 tune increased throttle response to be sharper at take off. I felt delay on take off...but after Stage 1 map upload fixed that on my 117 ST. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👍👊

[@michaelbee1214]

Hello, have you had any issues with the tuner being stuck in recording mode? If so, how did you resolve the problem? When I check system info it says I’m still recording. Thanks !

[@HDVIBE]

Thanks for watching and for the question. I have not had the problem you mentioned. As I show in the video is the process I went through to recorded, load the new settings and get back into normal run mode. That is probably something to call HD tech support on to get a resolution. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍

[@michaelbee1214]

@@HDVIBE gotcha ok thanks for the heads up. Have a great day!

[@HDVIBE]

👍

[@johnmyers8588]

Rick, I appreciate the videos....and, yes, I'm already subscribed. Question: so, am I to assume that, as you stated in the comments I would need to download a map first and then perform an auto-tune? I know Harley wants to have Harley branded parts but, like you, I plan on running some aftermarket parts on my bike. I have the TAB BAM sticks with zombie baffles and will upgrade my air filter soon. My guess is that my bike will run like ass with yhe base map but the auto-tune should compensate for the after market parts? Thank you.

[@HDVIBE]

Thanks for watching, commenting and subscribing. I ran with the Tab 2-1-2 and BAM sticks on the base Stage 2 harley map (I had the Stage 2 upgrade completed before I changed to a full tab system) and frankly the bike ran well even before the smart tune sessions. Now if you did a Stage 2 with non Harley cam...it will probably be more challenging to get a good tune with the Harley tuner. Hope that helps. Ride safe and enjoy. ✌️👍👊

[@johnmyers8588]

@@HDVIBE Yes, sir.....that does help. My bike is new.....2024 Road Glide so I was gonna wait to upgrade the cam until after warranty expired. I figured I'd try the SE Pro tuner just for the slip-ons/air filter and have it dyno-tuned after the cam upgrade. Appreciate the fast reply! 🤘

[@HDVIBE]

@johnmyers8588 You are welcome.

[@c5vette739]

Do you know if you can buy an additional license if you want to use the tuner on another bike? If so, do you know price for a license?

[@HDVIBE]

Thanks for watching and commenting. You can not buy additional licenses for different bikes with this tuner. The HD tuners are 1 bike tuners. Once they are connected to a bike, it's married to the ECM. 👊👍✌️

[@lukefrear]

Rick, How about an update on this tuner? How many smart tunes have you run and added to your base map? Do you think adding smart tunes has made a difference or should I just ride with the base map? I am running a 114 stage 2 and it's running pretty good...

[@HDVIBE]

Hey Luke thanks for the question. I've run 2 smart tune sessions at this point. I'd say if the bike is running well with the base map...just keep running it as is. I think of the smart tune as a way to fine tune AFR based upon your riding style. I also have the RGS with a Stage 2 upgrade. Ran with base map for about a year and bike was running very well. I just ran a few smart tune sessions on it just to get it just a bit more fine tuned for my riding style. I'm sure if you did before and after dyno runs, you may see some slight improvement, but it's probably not enough that you would feel it under regular riding conditions. 👊✌️👍

[@lukefrear]

@@HDVIBE Thanks.. that was what i expected as well.. I will spend my time riding and smiling :) Appreciate all your videos! Are you looking at the ST?

[@HDVIBE]

@lukefrear I've looked at a sat on the RG CVO ST. Its a cool bike, but I think I will wait a year or two before I think about switching to the new platform. Seems to be some year one kinks that are still being worked out by HD. So for now, I'm working on my 2021 RGS and turning it into my vision of a CVO ST. 👊

[@Darrells..]

Great info rick👍👍

[@HDVIBE]

Thanks Darrell for watching and commenting. I appreciate your continued support to the channel. Ride safe and enjoy. 👍👊✌️

[@charleshuffnagle4807]

Thank you Rick! I just put the base map on my 22 street glide St with the SE pro tuner I’m running S&S 45 mufflers I found a better throttle response as well and more available top end torque but the engine seems to run hotter did you experience that as well? Thanks for the informative videos!

[@HDVIBE]

Thanks Charles for watching and commenting. I did not notice the bike running any hotter after loading the base map. I'd suggest running it with the base map for 2 tanks of fuel. Then do some smart tune sessions to get the base map adjusted specific to your bike and set up. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍

[@charleshuffnagle4807]

That’s a good plan Thanks again! and I’m subscribed great info!

[@HDVIBE]

@charleshuffnagle4807 ✌️👊👍

[@anthonypesquera5858]

Do not know if you answered this. But you done recording and uploaded the change did you removed the tuner or kept it on?

[@HDVIBE]

Thanks for watching and commenting. I leave my tuner on the bike but you do not have to do so. Once you upload the changes to the map, there is no need for the tuner to stay connected to the bike. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍

[@paultancraitor5844]

Can you do just an auto tune only without downloading a tune.I only have a K&N on my tri-glide with an external breather and catch can? I don’t want any aftermarket Slip-Ons on it now. Can I bypass downloading a tune and go straight to auto tune .Thanks

[@HDVIBE]

Thanks for watching and commenting. Unfortunately to Auto tune you have to select a base map to start from. I would suggest using the Stage 1 map, then start auto tuning from that. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👍👊

[@Pinozcyclezandridez]

Great vid! Will this work with a 2 into 1 full system? Thanks!

[@HDVIBE]

Thanks for watching and commenting. I have known people to use this tuner with a 2 into 1 exhaust system. First load the Stage 1 map for your particular bike. I'd suggest running the base map for a couple of tanks of fuel. If it's running well...you can leave it with that. If you want to dial it in a bit more, then run the smart tune. Remember, this tuner is for 2021 and newer bikes. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊👍✌️

[@Pinozcyclezandridez]

@@HDVIBE thank you sir! I have a 24 RG, SE wedge air cleaner, KW slip ons and SE base tune. I have a Thunderheader full system coming in and was concerned about the tune possibility.

[@HDVIBE]

@Pinozcyclezandridez I've used the Screamin Eagle tuner with the Tab Performance 2-1-2 de catted headpipe and the bike runs awesome. 👍✌️👊

[@Pinozcyclezandridez]

@@HDVIBE awesome! Autotune or just base?

[@HDVIBE]

@Pinozcyclezandridez I started with base. Stage 2 for that bike since I upgraded the cam. Then I ran some smart tune sessions to dial it in.

[@alaingosselin8764]

I’m subscribed, I’m looking at this tuner to buy, but not sure if it would help , I got a 2023 low rider st , I just put a full 2 in 1 exhaust, my question is, do I need to change my air breather or can I keep the original one on, to tune it ? Thank you in advance, great video by the way .

[@HDVIBE]

Thanks for watching, commenting, and subscribing. The tuner will definitely help even if you don't change out the breather. You would start by loading the base Stage 1 map. Then run with that for at least 2 tanks of fuel or around 400 or so miles. If the bike is running well...then leave it alone. If you want to run some smart tune sessions you can also do that after the 400 or so miles. I found throttle response is much improved after loading the stsge 1 map. Thanks for your support and ride safe. 👍✌️👊

[@alaingosselin8764]

@@HDVIBE thank you much appreciated ✌️

[@HDVIBE]

@alaingosselin8764 You are welcome.👊

[@Group_Anonymous]

the 117 FXLRST comes with a Heavy Breather intake, which is already a high flow intake. The restriction on that model is in the slip-on exhaust pipes, which is why you DO NEED a tuner when replacing just the slip-on pipes........ many people will say "you don't need a tune if only doing slip-on"....thats not true on the FXLRST.

[@HDVIBE]

Thanks for watching and commenting. Your point is correct. You don't need to fo the Stage 1 tune with just exhaust but it definitely improves throttle response. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👍✌️👊

[@paulperrello1356]

Hello Rick, Did you realize a difference with only a stage 1? And enjoy you content. Thx

[@HDVIBE]

Hi Paul. The main difference I noticed was quicker throttle response from take off. Before the Stage 1 with the map upload or tune, the throttle was a bit sluggish. Now it's very responsive. Thanks for the question and your continued support to the channel. Ride safe and enjoy. 👍👊✌️

[@georgelopez9343]

Hello Rick did you say this blue tooth tuner is for 21 and up

[@HDVIBE]

Thanks George for watching and commenting. That is correct, the SE Pro Street Bluetooth tuner is for 2021 and newer Touring and Softail models. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

[@aubreykraeker4579]

Using this feature does ur top speed get better? Do you gain hp and tq?

[@HDVIBE]

Thanks for watching and commenting. Top speed doesn't not change as there is a limit. You will get more HP and Torque by tuning as you get better air fuel mixture ratios across the rpm snd throttle position range. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

[@rexvaughn986]

My red security light stays on whether it’s recording or just plugged in. Is this normal? Is there a setting to turn this off.

[@HDVIBE]

Thanks for watching and commenting. As soon as I stopped recording and uploaded the adjustments to the base map following the prompts. The next time I started up the bike, the red security light was off. I'm guessing the bike is still in record mode which is what causes the security light to stay on. If it's not in record mode, I'd suggest putting the bike into diagnostic mode and see if you have any codes that need to be cleared as a result of something else going on. I'll link a video on how to do that as well for you.

[@HDVIBE]

kzbin.info/www/bejne/lYaxgotqZ6p3edk

[@Garage28_28]

can you tune a off road catlass exhaust with this tuner

[@HDVIBE]

Thanks for watching and commenting. As to your question, I run a catlees headpipe on my other bike and the screamin eagle tune does fine. Frankly, the stock headpipes flow very well even with the cat, and there isn't much difference in flow, especially if you go 2-1-2 aftermarket. From my perspective the biggest benifit to a catless headpipe is the heat reduction. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍

[@jiriza84641]

Any reason when I plug my SE tuner into the port on a 24 RG it doesn't flash green or flash a all?

[@HDVIBE]

Thanks for watching and commenting. Did you turn on the ignition to power up the bike with the tuner plugged into the port?

[@jiriza84641]

@@HDVIBE I followed HD's tutorial. it says plug it in, then turn ignition on. no LED flash as in your video?

[@HDVIBE]

@jiriza84641 It should see the light once it's plugged in and the ignition is turned to run mode. Make sure you didn't turn it to accessory mode. If that doesn't work, I'm not sure what you can do other than call the Harley support number.

[@jiriza84641]

@@HDVIBE Do you have to use the Y cable to do anything?

[@HDVIBE]

@jiriza84641 I do not have a y cable for this tuner. You only use that if you are connecting the tuner to your laptop and not using the Bluetooth and app on your phone. As noted in the video, I just used the tuner and my phone with the app. 👍

[@tonymaxx77]

Hey Rick, thanks for all your videos. What air filter are you running for a stage 1 ? I have Tab mufflers with zombie baffles and Z rings torq cones. Stock air filter still. I was thinking about getting the K & N Harley filter with this screaming eagle tuner for my stage 1. Will it work ? 2023 RGS. 114

[@HDVIBE]

Thanks Tony for watching and commenting. On the Street Glide ST I am running the Harley Ventilator Extreme. It has the wider K&N filter. The tuner should work just fine with that set up. I used the pro street tuner on my RGS with the Stage 2 SE8 447 cam, Ventilator breather and Tab full exhaust system with the 2-1-2 de catted headpipe. Runs awesome. Thanks for your support to the channel. Ride safe and enjoy. 👊✌️👍

[@robertlarsen1468]

On your stage 2 RGS do you have the wideband 02 sensors?

[@HDVIBE]

Thanks Robert for watching and commenting. I do not have wide band O2 sensors on the Stage 2 RGS. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊👍✌️

[@cameronbartley6139]

Do you know if this tuner has a stage 1 tune for a 2023 low rider st.?

[@HDVIBE]

Thanks for watching and commenting. The Bluetooth tuner has the Stage tunes for the Grand Touring and softail models from 2021 and newer. Click on the link to the tuner in the description and you can read all the tuners specs and application. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

[@cameronbartley6139]

I'll subscribe right now. Thanks for responding backs quick

[@HDVIBE]

@cameronbartley6139 I do my best to respond as soon as I can to all comments. Thanks again for your support. Much appreciated. 👊✌️👍

[@ryangranath5740]

Mine won't load. Do you have to do smart session first?

[@HDVIBE]

Thanks for watching and commenting. You do not have to do smart tune first. Below is a link to another video showing how to load the base map. If you are already a subscriber to the channel.. thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. kzbin.info/www/bejne/h6e3oayvmpxpmJY

[@ryangranath5740]

@HDVIBE maybe it's an android thing. But I can only get so far and then I can't scroll down to where it says load or program vehicle. I can see ecm but nothing below.

[@HDVIBE]

@ryangranath5740 I use and Android phone and no problems. I followed exactly as I showed in the other video to load base maps and had no problems using the Adroid Phone.

[@scottlin777]

Technology now days is amazing.

[@HDVIBE]

That is correct Scott. Lots of electronics running the newer bikes. Thanks for watching and commenting. Much appreciated. ✌️👊👍

[@lukefrear]

Rick, is your base map name updated so next tune you start with the new tune? Or do you have to start with the 117 stage 1 map?

[@HDVIBE]

Thanks Luke for watching. To answer your question...yes. When the base map was saved with the smart tune calibration, the name was the same but with -1 on the end of the name. So if you then want to run another Smart tune, you would start with the -1 version. Thanks for your support and ride safe. 👊✌️👍

[@RunCMDmoto]

Did you notice a significant difference after the tune with how the bike rode and responded?

[@HDVIBE]

Thanks for watching and commenting. Throttle response was definitely better after loading the Stage 1 map onto the bike. The smart tune sessions further refined the tune to meet my riding style. Bike runs great and throttle response is immediate. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

[@geedubb-q1u]

I assume you can still use this tuner with a stock intake and exhaust?

[@HDVIBE]

Thanks for watching and commenting. You can use this with stock intake and exhaust. You would select the Stage 1 base map and go from there. On the bike featured in the video, I did the Stsge 1 map prior to the Smart Tuning shown in this video. However, I did have the more freely flowing Rinehart DBX 45 slip on exhaust on the bike at that time. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support to the channel and ride safe. ✌️👍👊

[@geedubb-q1u]

@@HDVIBE ..thnx. I’m a sub since the spring👍

[@HDVIBE]

@guyh.4121 👍

[@GlidingOnTwos]

Good for someone keeping their warranty.

[@HDVIBE]

Thanks Nore for watching and commenting. You are exactly right. You get a very good tune up to EPA standards and keep warranty in place. Ride safe and enjoy. ✌️👍👊

[@paulhorvath9784]

Will this not work on my 2020 Softail ?

[@HDVIBE]

Thanks for watching and commenting. The Pro Street Bluetooth tuner is for 2021 and newer Softails and touring bikes. For a 2020, you would need to use the older Style Pro Street Tuner. The data port on the 2021 and newer bikes is different than on the 2020 and older bikes. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👍👊

[@jpb-go8qh]

So the big question is, did you gain performance with the tune?

[@HDVIBE]

Thanks for watching and commenting. The bike runs great and has excellent throttle response. My butt dyno tells me it performs better...since it's never been on a dyno...I can't show specifics on a piece of paper. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍

[@dennisharrison4744]

Can you idle one down just a bit

[@HDVIBE]

Thanks for watching and commenting. I'm not 100% sure what you are asking...but if your asking about moving idle down with the tuner... you can not. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

[@nplantz]

Will this work for a stage 2?

[@HDVIBE]

Thanks Nick for watching and commenting. It will work for a Harley Screamin Eagle Stage 2 as long as the bike is a 2021 or newer. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so.

[@olivierharley6000]

It’s available in France ?

[@HDVIBE]

Thanks for watching and commenting. I'm not sure if the tuner is available in France. Check the Harley Davidson website. The one I used is 48 USA State compliant. HD may have the same product but for the international markets. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

[@danaholtz731]

I subscribed.

[@HDVIBE]

Thanks Dana for watching, commenting, and subscribing to the channel. I look forward to seeing your comments on other and future videos. Thanks for your support and ride safe. ✌️👊👍

[@bentleymoto2633]

Thank you!!

[@HDVIBE]

Thank you for watching and commenting. I appreciate your support. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

[@jkmoneygone172]

Hello. Does this add extra Hp or does it just make stage 1 run smoother?

[@HDVIBE]

Thanks for watching and commenting. Smart tuning will add HP and TQ as it gives the best Air/Fuel mixture. The Smart tune process is ultimately refining the tune specific to your bike set up and riding style. Obviously I don't have Dyno numbers but I have seen a Harley Tech tune a Stage 1 114 with a Pro Street tuner and get 110 HP and 120 TQ at the wheel on the dyno machine. That again was keeping the bike within EPA standards. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👍👊✌️

[@jkmoneygone172]

@HDVIBE man thanks for replying back so fast! I will be Subscribing now

[@HDVIBE]

@jkmoneygone172 You are welcome. I always try to get to comments quickly. Thanks for subscribing. I look forward to seeing your comments on other and future videos. 👍👊✌️

[@hollywood93c87]

Great video 👍. Can’t wait to try this out next riding season, darn winter is here in northern Alberta, ✌️

[@HDVIBE]

@hollywood93c87 👊👍✌️

[@LA86MM]

Can u plz do it on 48 sporster

[@HDVIBE]

Thanks for watching and commenting. If the tuner is specified for a 48 sportster, the process will be the same as what is shown in the video. Since I don't have access to a 48 sportster, unfortunately I won't be able to show that. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👍👊

[@richardrussell500]

Good video... :-)

[@HDVIBE]

Thank you, Richard, for watching and commenting. I appreciate the kind words. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍

[@josephsanchez3798]

Will this tuner work on a 2023 Harley purchased in California?

[@HDVIBE]

Thanks Joeseph for watching and commenting. I do believe HD recently has released a California version of this tuner. I suggest you go to the HD website and double check. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👍✌️👊

[@fxrdan]

GOOD NEWS. 2021-22 CARB Tunes now available. Harley Davidson Parts and Accessories Bulletin PAB 1144 (Rev A) dated 12-18-2023 announced that all the Stage 1 SE air cleaners are now CARB approved for 21-22 California models and the SE Pro Street Tuner now has Stage 1 tunes for 21-22 California models. Bluetooth Street Tuner tunes are available now. Non Bluetooth Street Tuner tunes available 1-1-2024

[@HDVIBE]

Thanks for watching and commenting. I did see that information recently. Thanks for sharing it. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👍✌️👊

[@mikechavez7844]

My dealership wants to charge me $250 to install the tuner. Is there a reason why? Can I just plug and play on this with auto tune?

[@HDVIBE]

Thanks Mike for watching and commenting. If you follow this video, there is no reason to pay $250. It's plug and play and a little bit of your time. If you are a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍

[@mikechavez7844]

@@HDVIBE I’m a subscriber as of yesterday, thank you for the informative video

[@HDVIBE]

@mikechavez7844 You are welcome. I look forward to seeing your comments on other and future videos. Ride safe and enjoy. 👊👍✌️

[@georgestich7661]

I can't get past an error of error retrieving calibration

[@HDVIBE]

I can't specifically provide a solution. My first idea is make sure your phone stays active and you don't interrupt the Bluetooth connection by the phone trying to or also connecting to the infotainment system. Here is a link to Harley trouble shooting info serviceinfo.harley-davidson.com/sip/service/document/1875018054955116931

[@georgestich7661]

Thanks yeah I can see vin and all gage data. Seems to not pull tunes from the cloud. Nothing in troubleshooting helps unfortunately

[@HDVIBE]

Is the firmware updated on both the tuner and the app? I'd suggest calling the HD support if you can't get it to work. I had zero problems both with the initial map load and subsequent smart tune calibration updates.

[@HDVIBE]

@georgestich7661 The only other thing to I can think of is all DTC codes must be cleared before starting the process. Make sure you don't have any codes that need to be cleared.

[@marco-tiopet4020]

👍✌️

[@HDVIBE]

Thanks for watching and commenting. I appreciate your continued support. 👊✌️👍

[@damuv]

Does it make your bike run cooler?😂

[@HDVIBE]

Check my earlier reply. Not sure if it runs cooler but it definitely doesn't run hotter. ✌️👊👍

[@WarBorn313]

My dealership said it would cost me $1100 and I would have to purchase this tuner so they could use it.

[@HDVIBE]

Thanks for watching and commenting. So, you can buy the tuner and do the initial base map load yourself and then do the Smart Tune or Auto tune yourself as well as I have shown in the video. Follow this video and save yourself $1,100. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👍✌️👊

[@Matosjay]

This guy gets strange hear and there..

[@HDVIBE]

Thanks for watching and commenting...although I'm not sure what you are attempting to convey. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👍✌️👊

[@Matosjay]

@@HDVIBE meant the tuner..

[@HDVIBE]

👍

[@rangermctague]

For the 2023 streetglide ST, do you need to tune it if you are only adding a slip on muffler?

[@HDVIBE]

@rangermctague Thanks for watching and commenting. You do not need to tune it with just adding slip ons...however if you do put a stage 1 tune on it, you definitely get better throttle response. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍