Autodesk inventor Create Spiral Staircase And Railing with Sheet Metal Exercise 47

Creating a spiral staircase with sheet metal can be a fascinating project. Here's a simplified step-by-step guide to get you started:
Design and Planning:
Sketch out your design on paper, including dimensions for the staircase's height, diameter, number of steps, and the angle of rotation.
Decide on the type of sheet metal you want to use, considering its thickness, strength, and appearance.
Materials and Tools:
Sheet metal (preferably pre-cut to the required dimensions)
Metalworking tools such as shears, a brake press, a welding machine, and a grinder
Safety equipment including gloves, goggles, and a welding helmet
Cutting the Metal:
Use shears or a cutting tool to cut the sheet metal into the required shapes for the steps and the central column.
Ensure precise measurements and clean cuts for accuracy in assembly.
Forming the Steps:
Use a brake press or other bending tools to form each step. The steps should be curved to match the spiral shape of the staircase.
Depending on your design, you may need to add reinforcement to the steps for stability.
Constructing the Central Column:
Cut and shape a metal rod or pipe to serve as the central column of the staircase.
Weld or bolt the steps onto the central column at regular intervals, ensuring they are evenly spaced and aligned.
Assembly and Welding:
Assemble the steps around the central column, starting from the bottom and working your way up.
Use clamps or other securing methods to hold the steps in place during welding.
Weld each step securely to the central column and any necessary reinforcements.
Finishing Touches:

[@shabeermech9328]

Good one sir..expecting more weldment and icopy

[@SolidCam-Cad]

Thank you . sure i will make tutorial about i copy . for the weldment you can see this tutorial kzbin.info/www/bejne/pGXCpmaQnbaCjrssi=BnKl5BPlDBL3CGlq kzbin.info/www/bejne/qGmofYmMf6d-l7ssi=27IQrdAvriuCODcv kzbin.info/www/bejne/m5K4oGmIh86percsi=75JOjDxBcA7v_veb

[@CAD_by_NANA]

Great project Good job Bro!

[@SolidCam-Cad]

Thank you sir 🙏

[@CAD_by_NANA]

@@SolidCam-Cad I’m female

[@SolidCam-Cad]

@@CAD_by_NANA sorry . Any way thank you again

[@WeldingTips-zi6yx]

very interesting tutorial .🤩😍

[@shabeermech9328]

Sir can u take tutorial about i copy i part etc