Thanks for the reply to my previous question. Your video is perfect of how to replace wheelbearings, BUT you forgot to show how to replace the Wheelbearing seal. After replacing my bearings I had ABS/BAS/ESP light come on. After serious investigation, Firstly I did not know about the ABS Sensor/pulse Ring in the hub seal. I was told that you MUST be very careful with that ring, Firstly, you must NOT tap it in, you have to press it in, Secondly, you must NOT use a ferrous tool to press it in it has to be plastic/nylon/wood, also depth is important, if gap between sensor and ring is too large, then it won't pick it up, and it HAS to be level/straight. Those things are extremely important to show in your video. I had to purchase a complete kit again, just to get the new sensor ring.
@autodocuk Жыл бұрын
Your remark is very useful to us, we will work on it.
@sfax11 ай бұрын
Thank you for your feedback @markusb2743. So the seal has to go first on the spindle base or is it part of the hub? @3:28 I'm guessing it's the top black ring here? www.fcpeuro.com/public/assets/products/249614/large/MER-2093300325-2.jpg
@Gatsu3D2A10 ай бұрын
I just did mine and have the esp bas abs error. My hubs came with seal already pressed in and looks to be in all the way already.
@a.f.15873 жыл бұрын
You shoul pack the bearing before install.
@yaacin7483 жыл бұрын
what a professional job well done
@autodocuk3 жыл бұрын
Thank you for your feedback! We are glad to know this tutorial was useful to you. Stay tuned with us! Best regards, Autodoc team!
@richardwilliams32152 жыл бұрын
super video, one thing - after adjusting the clamp you don't show retightening the clamp bolt before replacing the dust cover
@marku28052 жыл бұрын
I thought the same thing at first, but it's there around the 12-13 minute mark. Though no torque spec is provided on that bolt in the video. I believe it is 8 or 9 nm
@BRsWorld Жыл бұрын
They do it towards the end after mounting the wheel
@user-fi5cj4vi6i2 ай бұрын
mercedes say to use a dial indicator gauge to adjust bearing
@user-mk7mj6jg7bАй бұрын
Yes, this is a wrong way tu change bearing.
@lameckmasau1915 Жыл бұрын
The video is really helpful especially if you have all the tools.
@autodocuk11 ай бұрын
We are glad that this video was useful to you!
@isaaccristobal4816 Жыл бұрын
Bro makes it look easy
@sivapillay82062 жыл бұрын
Thanks Auto Doc for your help. Need to get the drill press.
@autodocuk2 жыл бұрын
Hi! We are glad this video was helpful to you!
@petrturcovsky70353 жыл бұрын
Super job, thanks guys.
@autodocuk3 жыл бұрын
Thank you for your feedback! We are glad to know this tutorial was useful to you. Stay tuned with us! Best regards, Autodoc team!
@user-tz9bt4wp4n Жыл бұрын
Восхитительная работа
@deonerasmus5629 Жыл бұрын
Great video.Thanks
@autodocuk Жыл бұрын
@FixItRyan3 жыл бұрын
Great video! How do you know how to tighten that last nut? Put wheel on, make sure the wheel spins freely, take wheel off, and then tighten?
@paiwandmustafa53248 ай бұрын
Thank you very much
@yammydodger19889 ай бұрын
You should set the bearing preload on a Mercedes with a dial gauge indicator.
@autodocuk9 ай бұрын
We are sure that your comment will be useful to many of our viewers.
@SupermanGaming1080p6 ай бұрын
This is the same on a W204. Dont grease the bearings like he did, nothing came on the rollers
@abdussalammohamed8630 Жыл бұрын
Great video thanks
@dillee9988 Жыл бұрын
Thank you for this excellent video.
@autodocuk Жыл бұрын
We are glad that this video was useful to you!
@roberts79612 жыл бұрын
Great Job young man
@autodocuk2 жыл бұрын
Hi! Thank you for the feedback. We are happy that you appreciate our work!
@alexey99003 жыл бұрын
Good 👍👍👍
@MdBablu-gy3pq3 жыл бұрын
Nice fitting
@andrewstewart87043 жыл бұрын
Do we not pack wheel bearings anymore?
@autodocuk3 жыл бұрын
Thank you for your comment! Please could you clarify or rephrase your question and we will be able to help you. Best Regards, Autodoc team
@cuzimnik253 жыл бұрын
Hes right you didnt force grease into the bearing. You smeared it like a nub to be honest. Grease in palm of hand. With other hand pull the cage to one side and smack it into the grease until the great squeezes out the top.
@davefrancis72132 ай бұрын
Do you have to replace the sleeves that the bearings sit in as I don’t have a press? Thank you
@autodocuk2 ай бұрын
Yes, it definitely needs to be changed.
@terry.chootiyaa3 жыл бұрын
*Hi you used multipurpose grease but should you have used high temperature resistant grease as these bearing will heat up when in motion 😐 **7:40*
@matiashyrsky3 жыл бұрын
Bearinglube is usualle green as in the video.
@autodocuk3 жыл бұрын
Thank you for your comment. You are absolutely right, we just used a special grease with a wide temperature range of application 21909 FEBI BILSTEIN. Best Regards, Autodoc team
@777720132 жыл бұрын
The grease he uses is from Mercedes look up Mercedes wheel bearing grease and it should be in a little white tube
@gplusgplus22863 жыл бұрын
Very good job
@autodocuk3 жыл бұрын
Thank you for your feedback! We are glad to know this tutorial was useful to you. Stay tuned for more! Best regards, Autodoc team!
@mohamedhajer6163 жыл бұрын
Nice
@Dnasty18 ай бұрын
Just wondering how everything slipped off so effortlessly for you. I have a car that is probably not as old as that and even when I have the rotor on for a day it gets seized on a bit. I am hoping my wheel hub can come off so easy but not sure. I don't even live in a rust area.
@autodocuk8 ай бұрын
We cannot show all the nuances and problems during replacement; this is all individual and it is not always possible to solve them at home. To avoid this, we always recommend that replacements be carried out by specialized car services.
@RothBeyondTheGrave6 ай бұрын
They break everything loose before filming. They then go back & basically "finger-tighten" everything, then they make the videos. I've seen them state this multiple times on other vids. Done for filming efficiency.
@shaagealgareb91893 жыл бұрын
good
@matthewm5640 Жыл бұрын
What is the make and model of that 3-jaw puller? I can not find one like it and the style of the ones I have do not work.
@autodocuk Жыл бұрын
You can get acquainted with the puller at the link www.autodoc.co.uk/force/13659444?search=FORCE%20External%20Puller%20(6590203) AUTODOC
@ChezzOnBass Жыл бұрын
What are the torque settings for all the different bolts?
@autodocuk Жыл бұрын
You can find this information in the technical documentation for the repair of your car.
@mohamedalmorabit5734 ай бұрын
👌👏
@LHommeDeParfum Жыл бұрын
Hi Where do we find the part number on the wheel hub? Thanks!
@autodocuk Жыл бұрын
It is not possible to answer your question unambiguously
@markusb2743 Жыл бұрын
I replaced me front wheel bearings and now my ESP and ABS light comes on and can't be cancelled, what have I done wrong. I have a W203 C230 Compressor Coepe' I changed my bearings because my car has a terrible shudder when I brake, the Discs is brand new
@autodocuk Жыл бұрын
There is a possibility of incorrect installation or damage to the sensors. Without proper diagnostics it is difficult to say for sure, we recommend contacting the service.
@RothBeyondTheGrave6 ай бұрын
Must use factory parts, not aftermarket for this application. The magnetic tone ring is often not present on aftermarket units, & the wheel speed sensor is left without a signal to read. This is what causes your fault, given the rest of the job was done correctly & nothing got dirty or damaged in the process.
@meadedillon1715 Жыл бұрын
This video leaves out many critical details. Firstly, Mercedes specifies a precise amount of grease to ensure it will circulate within the hub. Next, the bearing play was not set with a dial gauge. Finally the locking screw was not set on the bearing retaining nut. If this were my car, I would never return to this shop.
@autodocuk Жыл бұрын
Your comment is very helpful for us, we'll work on it.
@samurboi80075 ай бұрын
lmfaooo they just left an autogenerated comment. Come on every benz Stealership is just like this anyways and would charge $$$$
@seeforyourself78413 жыл бұрын
Great vid. Is it recommended to replaces the races or can you get away without it?
@autodocuk3 жыл бұрын
It is generally desirable to replace, but if the old one is in good condition, then you can safely use it. AUTODOC
@big5astra3 жыл бұрын
I serviced the front wheel bearing on my 2001 C-class as per your video. I did install a non OEM seal in the process and now I have an ABS warning on the car. Could it be because of the non OEM wheel bearing seal I fitted? Appreciate your reply, thanks.
@autodocuk3 жыл бұрын
The most likely problem is in this. If you contact our Customer support department and we will be happy to help you find the right parts by their OEN numbers. AUTODOC
@hakonflgstad11272 жыл бұрын
Got the same problem. A friend of my bought the wheel bearing. I mounted it, followed the video here. But now the ABS sensors at the front wheels doesn`t get a signal. He bought some Ridex bearing kit.
@big5astra2 жыл бұрын
@@hakonflgstad1127 My solution was to buy the original seals (at high cost!) and when I fitted the OEM seals, the problem of the ABS issue went away!
@samurboi80075 ай бұрын
someone talked about an ABS pulse ring in the hub seal, it has to be installed leveled and at the proper depth or it wont work or will throw errors, worse yet itll break lol normal benz stuff
@Royalwaffles3 ай бұрын
@@samurboi8007 would you happen to know the correct depth
@zbigniewmroz40292 жыл бұрын
Brakuje sprawdzenia - bicia bocznego tarczy hamulcowej czujnikiem zegarowym! Podstawowy błąd - nie uczmy się od słabych mechaników!
@autodocuk2 жыл бұрын
Witamy, dziękujemy za istotny komentarz. Weźmiemy to do uwagi podczas nakręcania następnych filmików.
@glyphic3132 жыл бұрын
What is the mechanic’s name?
@autodocuk2 жыл бұрын
Mechanic's name is Dan
@user-ml3ew7qz8l3 жыл бұрын
허브베어링에 구리스 촵촵촵 멕여야지 저렇게 했다가 베어링 다 나감ㅋㅋㅋ
@krazzdav3 жыл бұрын
That is not the proper way to adjust the wheel bearings. You need a dial guage indicator to check the play and is indicated in the Mercedes repair manual
@autodocuk3 жыл бұрын
Please specify the time of the piece from the video in which you are interested in.
@krazzdav3 жыл бұрын
@@autodocuk your procedure at 10 when you are seating the bearings. This is typical for older vehicles like GM how you show but shouldn't rough in on Mercedes like that.