Рет қаралды 366
The above procedure must be completed with 90 seconds of AutoGen power up. If not, the internal WiFi modem will be turned off and status led will breath white.
When the status led is blinking blue, its in Listening mode. This is the necessary mode to setup with a new WiFi access point.
If you device is not blinking blue when first powered, view Installation instructions to wipe any stored WiFi credentials. This can be accomplished by press and holding the Setup button until it blinks blue, continue to hold until rapid blinking blue, then release.
Now you can start over.
Note:
When searching for Photon-xxxx xxx and selecting, your phone may suggest whether to keep the new WiFi connection as it won't have access to the Internet. This is normal as you are directly connected to a WiFi device without an Internet service, so select Yes, Keep the Connection.
Navigate to 192.168.0.1 from your phones Web browser and follow the prompts to scan and enter your wifi ssid password details.
In the above example, it connected to WiFi AutoGenV2, yours will be different ofcourse.