Intro to Ford Programming Training

This introductory Ford programming webinar will provide you with a basic understanding of how to utilize the FJDS Software to program Ford vehicles yourself.
Topics Covered:
• Introduction to Ford FJDS Programming Software
• How to Register and Purchase FJDS Software
• How to Program and Update a 2010 Ford
Expedition
• How to enter Solenoid Strategy and Body ID on the
​​​​​​​ Transmission
DrivePro™ ES gives automotive repair facilities on-demand access to OE diagnostic software, built-in remote assisted programming, and ADAS calibration-all connected to live repair guidance from IVS 360™. IVS 360 provides unlimited technical support from OE-trained Master Technicians equipped with brand-specific repair knowledge, learned only from years of hands-on dealer experience, to help you complete complex repairs with results guaranteed!
Learn More: www.opusivs.co...

[@chrismaddox15]

Great instruction. Thanks.

[@OpusIVSTV]

Glad it was helpful!

[@devonteforeman]

For replacing the valve body and TCM, not the entire transmission, I do a module installation for the TCM, and then program the solenoid strategy and IDN that is printed on the new valve body. Lastly, I run an update on the PCM. I still have the old TCM, so I am assuming this is the best approach?

[@josegarcia-th3pj]

you can use any interface(j2534) or is has to be ford

[@sthedycantonambaekome710]

Hello I would like to have more details on the use of the fjds software, can it be used with the GODIAG j2534 vci?

[@max13ut]

how do you do paramemter reset i never seen it shown on the screen

[@jahrain1693]

Very good teaches

[@jeremyjsword]

I keep getting a DB error when I try to install FJDS to program a DPC202 PCM. Any suggestions how to remedy this?

[@marcialcabrera7611]

Is it hard to program a RFA module? Do you need a special software to do so? I'm trying to contact many programmers but looks like nobody knows how to do it some say I need a special software to do so since requires special software becuz of the security system in the car ..any advice?

[@marcialcabrera7611]

BTW IS for a 2019 ford escape 1.5 , push start ..thanks for the answerr..

[@jamessegura9358]

Why don't it let me download FJDS right now

[@robertholliday3442]

its not served through ssh. if you want to download it you need to disable a bunch of security stuff or just use the developer console to force download.

[@kennethmoriarty3201]

Dirty little secret: FJDS has limitations compared to IDS. Since I already owned a J2534 VCI (Autel MaxiFlash Elite), I thought I’d be able to use the cheaper license of FJDS and avoid having to use Ford’s proprietary J2534 device to program the APIM module (Sync) in my 2016 Transit Connect. Alas, The APIM is NOT among the modules available to be programmed by FJDS. Frustrating to say the least. I was informed by the Bosch tech support that I would need IDS to program my APIM. which IDS requires using a Ford VCM - not cheap. Do- It-Yourselfers beware

[@jahrain1693]

That means I can’t use the autel Maxisys ultra vcmi to do the programming

[@JamesValentineBaja1000]

And Dardaq3 is FORD approved.

[@Quick_Fast_Hurry]

I have a vcm3 for sale

[@sthedycantonambaekome710]

Hello I would like to have more details on the use of the fjds software, can it be used with the GODIAG j2534 vci?

[@sthedycantonambaekome710]

I have a Ford explorer 3.5l from 2011. So a Ford explorer PCM from 2013. Was installed. I would like to resolve the PCM wine and data configuration problem misconfigured

[@sthedycantonambaekome710]

Hello I would like to have more details on the use of the fjds software, can it be used with the GODIAG j2534 vci?